フリーダイヤル 0120-769-103
Emailjpesales@dwyeromega.com

ACC141A-2

High Output Accelerometers | ACC141A-2
新製品

High Output Accelerometers

スクロールダウンし、全ラインアップをご覧ください

  • 製品情報が英文ですが、日本でお買い求め頂けます。
    カスタマーサービスにて日本語でのサポートを致します。
  • Excellent Static and Dynamic Response
  • Gas Damping with Minimal Temperature Effect
  • High Output Signal
  • High Overload Capacity (2000 G Static)
  • Low Transverse Sensitivity (0.012 G/G)
  • Wide Range Calibration
  • 3 m (10'''') Cable, Standard
加速度計 / 振動変換器 - 関連する商品を探す
(見つからない場合はカスタマーサービスにご連絡ください)

商品説明

The ACC141 Series are linear accelerometers that produce a high level output proportional to the instantaneous acceleration from static to 3000 Hz (depending upon range). The excellent dynamic response is enabled by using air damping which has much better temperature properties than fluid damping. The rugged capacitive sensor allows the high overload properties and delivers excellent accuracy and long term stability. The rugged stainless steel case with O-ring seal provides excellent environmental protection and the integral base plate make installation and mounting quick and isolates the unit from mounting strain.

Specifications
Linearity: ±1.0% full scale
Hysteresis: 0.10%
Repeatability: 0.05%
Transverse Acceleration Effect: <±0.012 G/G
Damping: Approximates 2nd order system with 0.7 critical damping [gas squeeze film 0.7±0.2 of critical at 25°C (77°F)]; damping ratio increases approximately 0.27%/°C
Frequency Band: Flat from static to approximately 60% of natural frequency (all ranges)
Resolution: Infinite, limited only by noise level
Operating Temperature: -23 to 65°C (-10 to 150°F)
Zero Shift: <±0.036% range/°C (<±0.02% range/°F)
Sensitivity Shift: <±0.036% range/°C (<±0.02% range/°F) (slightly higher effect when “A” models are operated at excitation levels below 10 Vdc)
Zero G Output: <±25 mV
Full Scale G Output: <±25% nominal output
Noise Level: <±0.01% nominal range (RMS)
Calibration: Each unit is supplied with a computer generated plot of output vs acceleration at the specified output voltage
Sensitivity: Reported at the nominal range
Calibration Voltage:
    ACC141A: 10 Vdc
    ACC141B: 24 Vdc
Excitation Voltage Range: 3-wire circuit
ACC141A: 5 to 15 Vdc @ 5 mA (Cal at 10 Vdc)
ACC141B: 10 to 28 Vdc @ 10 mA (Cal at 24 Vdc)
Nominal Output:
    ACC141A: ±500 mV
    ACC141B: ±1000 mV
Electrical Connection: 3 m (10') cable
Case: Stainless steel, O-ring
Weight: 30 g (1 oz)
注文する (部品番号ビルダーより掲載以外の製品もご選択いただけます)(注文数を入力の上、"カートに追加"をクリックしてください)
部品番号/Desc.
注文数
商品説明
10 Vdc CALIBRATION VOLTAGE
ACC141A-2
お問い合せ下さい   
納期: 
 
 
Range G 2, Excitation Voltage 10 Vdc
ACC141A-4
お問い合せ下さい   
納期: 
 
 
Range G 4, Excitation Voltage 10 Vdc
ACC141A-8
お問い合せ下さい   
納期: 
 
 
Range G 8, Excitation Voltage 10 Vdc
ACC141A-15
お問い合せ下さい   
納期: 
 
 
Range G 15, Excitation Voltage 10 Vdc
ACC141A-30
お問い合せ下さい   
納期: 
 
 
Range G 30, Excitation Voltage 10 Vdc
ACC141A-60
お問い合せ下さい   
納期: 
 
 
Range G 60, Excitation Voltage 10 Vdc
ACC141A-150
お問い合せ下さい   
納期: 
 
 
Range G 150, Excitation Voltage 10 Vdc
ACC141A-600
お問い合せ下さい   
納期: 
 
 
Range G 600, Excitation Voltage 10 Vdc
24 Vdc CALIBRATION VOLTAGE
ACC141B-2
お問い合せ下さい   
納期: 
 
 
Range G 2, Excitation Voltage 24 Vdc
ACC141B-4
お問い合せ下さい   
納期: 
 
 
Range G 4, Excitation Voltage 24 Vdc
ACC141B-8
お問い合せ下さい   
納期: 
 
 
Range G 8, Excitation Voltage 24 Vdc
ACC141B-15
お問い合せ下さい   
納期: 
 
 
Range G 15, Excitation Voltage 24 Vdc
ACC141B-30
お問い合せ下さい   
納期: 
 
 
Range G 30, Excitation Voltage 24 Vdc
ACC141B-60
お問い合せ下さい   
納期: 
 
 
Range G 60, Excitation Voltage 24 Vdc
ACC141B-150
お問い合せ下さい   
納期: 
 
 
Range G 150, Excitation Voltage 24 Vdc
ACC141B-600
お問い合せ下さい   
納期: 
 
 
Range G 600, Excitation Voltage 24 Vdc
注: Comes complete with computer generated plot of output vs acceleration and operator’s manual.
We noticed you are from the US. Visit your local site for regional offers and live support.