Low Profile Industrial Grade Accelerometers

ACC787A

Industrial Low Profile Accelerometer

^¥64,430 ACC787A

注文する

Corrosion Resistant
Reverse Wiring Protection
Rugged Industrial Design
Ground Isolated
ESD Protection

加速度計 / 振動変換器 - 関連する商品を探す
（見つからない場合はカスタマーサービスにご連絡ください）

商品説明

The OMEGAROMETER Series accelerometers are one of the best accelerometers designed for industrial vibration measurements. These accelerometers feature a hermetically sealed 316L stainless steel case suitable for harsh environments. The ACC787A is a general purpose accelerometer with a low profile side cable exit.

SPECIFICATIONS
DYNAMIC
Sensitivity, ±10%, 25°C (77°F): 100 mV/g
Acceleration Range¹: 80 g peak
Amplitude Non-Linearity: 1%
Frequency Response:
   ±10%: 1.0 to 5000 Hz
   ±3 dB: 0.7 to 10,000 Hz
Resonance Frequency: 22 kHz
Transverse Sensitivity, Max: 5% of axial
ELECTRICAL
Power Requirement:
Voltage Source¹: 18 to 30 Vdc
Current Regulating Diode^1,2: 2 to 10 mA
Electrical Noise, Equiv. g Nominal:
Broadband: 2.5 Hz to 25 kHz: 700 µg
Spectral:
   10 Hz: 10 µg√Hz
   100 Hz: 5 µg√Hz
   1000 Hz: 5 µg√Hz
Output Impedance, Max: 100 Ω
Bias Output Voltage, Nominal: 12 Vdc
Grounding: Isolated case, internally shielded
ENVIRONMENTAL
Temperature Range: -50 to 120°C (-58 to 248°F)
Vibration Limit: 500 g peak
Shock Limit: 5000 g peak
Electromagnetic Sensitivity, Equiv. g, Max: 70 µg/gauss
Sealing: Hermetic to 10^-8 cc/s
Base Strain Sensitivity, Max: 0.002 g/microstrain
PHYSICAL
Weight: 145 g (5.1 oz)
Case Material: 316L SS
Mounting: ¼-28 captive hex head screw with 1.2 mm (0.046") diameter safety wire hole
Connector: 2 pin, MIL-C-5015 style
Connections:
   Pin A: Power/signal
   Pin B: Common
Mating Connector: Amphenol 97-3106A-10SL-4S type
Recommended Cabling: ACC-CB7-10

NOTES:
1 To minimize signal distortion when driving long cables or high-vibration signals, 24 to 30 Vdc powering is recommended. The higher-level constant current source should be used when driving long cables.
2 A maximum current of 6 mA is recommended for operating temperatures above 100°C (212°F).

注文する（部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)

他のお客様はこのような商品も購入しています。: このアイコンをクリックすると、このモデルを購入した他のお客様の購入商品リストが表示されます.

部品番号/Desc.

注文数

商品説明

ACC787A

¥70,873 (税込)
(税抜価格 ¥64,430)

納期: 2 週間

General purpose accelerometer with side exit connector

Accessories

ACC-CB7-10

¥34,980 (税込)
(税抜価格 ¥31,800)

納期: 9 週間

3.05 m (10') MIL/BNC twisted pair shielded cable

ACC-CB7-10WP

¥56,337 (税込)
(税抜価格 ¥51,215)

納期: 11 週間

3.05 m (10') waterproof twisted pair shielded cable

ACC-B3

お問い合せ下さい

納期:

Magnetic mounting base for flat surfaces, 30 lb force

ACC-B5

お問い合せ下さい

納期:

Magnetic mounting base for curved surfaces, 30 lb force

ACC-PS3-230VAC

お問い合せ下さい

納期:

230 VAC powered power supply

注: ACC787A includes captive mounting screw and calibration data. Specify cable separately, see Accessories. ACC787A + ACC-CB7-10 + ACC-B3 + ACC-PS2, is a typical accelerometer system.
Ordering Example: (1) ACC-CB7-10 Cable, ¥31,800 plus (1) ACC787A Accelerometer, ¥64,430, ¥31,800 + 64,430 = ¥96,230