Modular Signal Conditioning System
for Strain Gage Bridges, mV and other Sensor Signals

OM2

スクロールダウンし、全ラインアップをご覧ください

注文する

Compact, Light and Convenient to Use
Easy Access to All Trimpots
Integral Bridge Completion Resistors
Adjustable Bridge Sensor Excitation
Adjustable Filter Frequency AC or DC Operation
Screw Clamp Terminal Blocks

圧力変換器 (アクセサリ) - 関連する商品を探す
（見つからない場合はカスタマーサービスにご連絡ください）

商品説明

The OMEGA™ OM2 modular signal conditioning system provides a low cost, versatile method of interconnecting a variety of analog signals for measurement and control systems. The OM2 modules interface directly with sensors or analog signals such as strain gages, mV, thermocouples and RTD’s. The module conditions the input signal to an amplified voltage output of ±10 Vdc, allowing longer signal transmission and interfacing with data acquisition products such as analog/digital cards, dataloggers, PLC’s and chart recorders. The backplane includes a power supply (to power the modules) and mounting rails for convenient mounting capability. All connections are easily made with a screwdriver.

The backplane is available with a 115 Vac, 230 Vac or 10-36 Vdc power supply.

The backplane and signal conditioner assembly make a convenient, lightweight and accurate method of multiple signal conditioning in instrumentation environments. The signal conditioning modules can also be used by themselves as single amplifier devices. An optional interface mounting block can be purchased with screw terminations for easy power and output signal hookup. A typical system would include six modules and one backplane/power supply assembly.

For complete product specifications see the detailed spec sheet.

注文する（部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)

他のお客様はこのような商品も購入しています。: このアイコンをクリックすると、このモデルを購入した他のお客様の購入商品リストが表示されます.

部品番号/Desc.

注文数

商品説明

OM2-162

お問い合せ下さい

納期:

Signal conditioning module for 1/2 and full strain bridge circuits

OM2-163

お問い合せ下さい

納期:

Signal conditioning module for 1/4 , 1/2 and full strain bridge circuits (compatible with OM2-8608 only)

OM2-165

お問い合せ下さい

納期:

Signal conditioning module for full strain bridge circuits or transducers with open collector output

ACCESSORIES

OM2-8608-115AC

お問い合せ下さい

納期:

115 Vac powered backplane for 8 OM2 signal conditioning modules with power supply and mounting rails included

OM2-8608-230AC

お問い合せ下さい

納期:

230 Vac powered backplane for 8 OM2 signal conditioning modules with power supply and mounting rails included

OM2-8608-24DC

お問い合せ下さい

納期:

DC powered backplane for 8 OM2 signal conditioning modules with power supply and mounting rails included; 10 to 36 Vdc power

OM2-8608-48DC

お問い合せ下さい

納期:

DC powered backplane for 8 OM2 signal conditioning modules with power supply and mounting rails included; 24 to 72 Vdc power

OM2-2006

お問い合せ下さい

納期:

115 Vac powered backplane for one OM2 signal conditioning module with power supply (mounting rails not included) (not compatible with OM2-161)

OM2-2005

お問い合せ下さい

納期:

±15 Vdc powered backplane for one OM2 signal conditioning module (screw terminals only) (not compatible with OM2-161)

OM2-8100

お問い合せ下さい

納期:

Two 16' mounting rails (2 rails already included with OM2-8608)

注: Comes with complete operator’s manual.

製品マニュアル:

ダウンロード Bridgesensor Users Guide

ダウンロード Strain Gage Bridge Signal Conditioner

Modular Signal Conditioning System for Strain Gage Bridges, mV and other Sensor Signals

OM2

Modular Signal Conditioning System
for Strain Gage Bridges, mV and other Sensor Signals