フリーダイヤル 0120-769-103
Emailjpesales@dwyeromega.com

STANDARD TERMINAL BLOCK RELAYS

XRU1D Series

STANDARD TERMINAL BLOCK RELAYS | XRU1D Series

STANDARD TERMINAL BLOCK RELAYS

¥7,325 XRU1D24

CE
  • Pluggable Relay Allows for Field Replacement
  • Functional Plug-In Bridges
  • Screw Connections
  • LED Status Indication
  • DIN Rail Mount
  • Only 6.2 mm (0.24") Wide
  • All Common Input Voltages Between 24 Vdc to 120 Vac
  • NEMA 6 (IP67) Protection
  • Environmentally Friendly, Cadmium-Free Contact
  • Easy, Cost-Effective and Replacement Using Engagement Lever
リレー / タイマ - 関連する商品を探す
(見つからない場合はカスタマーサービスにご連絡ください)

商品説明

Application Description
Used in automation systems, electromechanical relays guarantee a safe connection between process I/O and electronic controls. The following functions are covered by relay coupling elements:
• Electrical isolation between the input and output circuits
• Independence of the type of switching current (AC and DC)
• High short-term overload resistance in the event of short circuits or voltage peaks
• Low switching losses
• Ease of operation

Accessories
Power Terminal Block
The XRAPLCESK power terminal block has the same shape as the relay modules and is used to feed in the bridging potentials. The nominal current is 32 A. When the total current is less than or equal to 6 A, supply can take place directly at the connecting terminal blocks of one of the connected relays.

End Cover
The XRAATPBK end cover is required at the start and stop of a relay strip. It can also be used for visual separation of groups of relays as well as separating relays with voltages greater than 250V and separating neighboring bridges with different potentials. It is equipped with pre-scored break out points at the bridging positions so that individual bridges can be passed through as needed. It may also be necessary to use the end cover between adjacent relays when three phases (L1, L2, L3) are used on the contact side of the relay.

Bridges
The XRAFBST colored, insulated plugin bridge system reduces wiring time by up to 70% compared to conventionally wired relays. The XRAFBST2, 2-position bridges, are suited for bridging a smaller number of relays and total currents <6 A. When a circuit is supplied from both sides, the circuit can be opened at any point, allowing all other modules to continue being supplied at the same time. The XRAFBST500 allow up to 80 modules to be bridged at one time. If bridges with different potentials meet in neighboring modules, the end cover XRAATPBK should be used. All bridges are equipped with a groove for removal with a standard screwdriver.

SPECIFICATIONS
Input Voltage:
   XRU1D24: 24 Vdc
   XRU1D24U: 24 Vac/Vdc
   XRU1D120U: 120 Vac/110 Vdc
Typical Input Current:
   XRU1D24: 9 mA
   XRU1D24U: 11 mA (24 Vac), 8.5 mA (24 Vdc)
   XRU1D120U: 3.5 mA (120 Vac), 3 mA (110 Vdc)
Connection Type: Screw connection
Rigid Solid AWG (mm2): 26 to 14 (0.14 to 2.5)
Flexible Stranded AWG (mm2): 26 to 14 (0.14 to 2.5)
Typical Response Time:
   XRU1D24: 5 mS
   XRU1D24U and XRU1D120U: 6 mS
Typical Release Time:
   XRU1D24: 8 mS
   XRU1D24U and XRU1D120U: 15 mS
Input Protection:
   XRU1D24: Polarity protection diode, free-wheeling diode
   XRU1D24U and XRU1D120U: Bridge rectifier
Contact Type: SPDT
Contact Material: AgSnO
Max Switching Voltage: 250 Vac/Vdc1
Min Switching Voltage: 12 Vac/Vdc
Limiting Continuous Current: 6 A
Min Switching Current: 10 mA
Min Switching Power: 120 mW
Ambient Temp Range: -20 to 60°C (-4 to 140°F)
Rated Operating Mode: 100% operating factor
Inflammability Class: V0, in accordance with UL 94
Mechanical Service Life: 2 x 107 cycles
*The separating plate, XRAPLCESK, should be installed for voltages greater than 250V (L1, L2, L3) between identical terminal points of adjacent modules. Potential bridging is then possible with the XRAFBST bridge system.
注文する (部品番号ビルダーより掲載以外の製品もご選択いただけます)(注文数を入力の上、"カートに追加"をクリックしてください)

他のお客様はこのような商品も購入しています。: このアイコンをクリックすると、このモデルを購入した他のお客様の購入商品リストが表示されます.

部品番号/Desc.
注文数
商品説明
Click to expand/minimize a list of what others bought with theXRU1D120U
XRU1D120U
¥7,497 (税込)
(税抜価格 ¥6,815)
納期: 2 週間
 
SPDT relay, 120 Vac/110 Vdc coil voltage
Click to expand/minimize a list of what others bought with theXRU1D24
XRU1D24
¥8,058 (税込)
(税抜価格 ¥7,325)
納期: 2 週間
 
SPDT relay, 24 Vdc coil coltage
  
XRU1D24U
¥9,350 (税込)
(税抜価格 ¥8,500)
納期: 2 週間
 
SPDT relay, 24 Vac/Vdc coil voltage
REPLACEMENT RELAYS AND ACCESSORIES
  
XRR1D120U
¥4,505 (税込)
(税抜価格 ¥4,095)
納期: 2 週間
 
Replacement relay for XRU1D120U
  
XRR1D24
¥2,915 (税込)
(税抜価格 ¥2,650)
納期: 2 週間
 
Replacement relay for XRU1D24 and XRU1D24U
  
XRAPLCESK
¥7,046 (税込)
(税抜価格 ¥6,405)
納期: 2 週間
 
Power terminal block
  
XRAATPBK
¥594 (税込)
(税抜価格 ¥540)
納期: 9 週間
 
Black end cover
  
XRAFBST2RD
¥408 (税込)
(税抜価格 ¥371)
納期: 9 週間
 
2-position red snap in jumper
  
XRAFBST2BU
¥408 (税込)
(税抜価格 ¥371)
納期: 9 週間
 
2-position blue snap in jumper
  
XRAFBST2GY
¥408 (税込)
(税抜価格 ¥371)
納期: 9 週間
 
2-position gray snap in jumper
  
XRAFBST500RD
¥6,270 (税込)
(税抜価格 ¥5,700)
納期: 9 週間
 
80-position red snap in jumper
  
XRAFBST500BU
¥6,270 (税込)
(税抜価格 ¥5,700)
納期: 9 週間
 
80-position blue snap in jumper
  
XRAFBST500GY
¥6,270 (税込)
(税抜価格 ¥5,700)
納期: 9 週間
 
80-position gray snap in jumper
  
XBMZB6
¥180 (税込)
(税抜価格 ¥164)
納期: 9 週間
 
6.2 mm white blank marker strip
Click to expand/minimize a list of what others bought with theXBANS3575P
XBANS3575P
¥3,438 (税込)
(税抜価格 ¥3,125)
納期: 2 週間
 
DIN rail, 35mm x 7.5mm x 2m, slotted
  
XBANS3575U
お問い合せ下さい   
納期: 
 
 
DIN rail, 35mm x 7.5mm x 2m, solid
Click to expand/minimize a list of what others bought with theXBANS3515P
XBANS3515P
お問い合せ下さい   
納期: 
 
 
DIN rail, 35mm x 15mm x 2m, slotted
  
XBANS3515U
¥6,298 (税込)
(税抜価格 ¥5,725)
納期: 2 週間
 
DIN rail, 35mm x 15mm x 2m, solid
  
XBANS3575PL
¥5,643 (税込)
(税抜価格 ¥5,130)
納期: 2 週間
 
DIN rail, 35mm x 7.5mm x 2m, slotted, aluminum
Ordering Example: (1) XRU1D120U SPDT relay, 120 Vac/110 Vdc coil voltage, ¥6,815
We noticed you are from the US. Visit your local site for regional offers and live support.