Programmable Step Motor Indexer/Drive

3540i

^¥133,250 3540i

注文する

Provides Up to 3.5 A per Phase and Microstepping to 50,800 Steps per Revolution
Accepts 12 to 42 Vdc Power Supply
Connects by a Simple Cable to Your PC for Programming (Cable Included)
Microsoft Windows™-Based Software for Easy Set up and Programming
8 Inputs, 3 Outputs
Optional Man Machine Interface (MMI) Allows Operator to Enter Distances, Speeds, Loop Counts and More
Compatible With Multi-Axis Controller HUB 444
Optional encoder + RS485 daughterboard
Sample Motion Programs Available by Request

モータ - 関連する商品を探す
（見つからない場合はカスタマーサービスにご連絡ください）

商品説明

The 3540i is a programmable step motor driver suitable for a wide range of motion control applications. It includes a sophisticated controller integrated with a 140 watt microstepping amplifier. The 3540i includes Applied Motion's easy to use Si Programmer™ Windows software for the rapid development of stand-alone motion control programs. The 3540i can also be commanded in real time from a host PC or PLC, using the Si Command Language™ (SCL). SCL allows for control via serial commands sent from a host device such as a PC or PLC. This permits the user to perform a variety of motion, I/O, and system status tasks in real time via a host serial device.

For multi-axis applications, up to 4 Applied Motion Si™ drives (stepper or Servo) can be networked using a single SiNet™ Hub. The 3540i includes 8 optically isolated programmable inputs for triggering, branching, position sensing and end of travel detection. 3 optically isolated programmable outputs can send signals to other electronic devices and activate relays. A daughterboard is available which provides an encoder input as well as an RS485 interface.

Si Programmer
Intended for use in stand-alone applications, Si (Simple Indexer) Programmer provides quick, out-of-the-box use with an extremely friendly, point-and-click graphical interface that does not require any software programming experience. Once an Si program has been constructed and downloaded to the drive, the program can be executed stand-alone at power-up or from an external trigger. Constructing a program is accomplished through the use of instructions selected in a point-and-click manner. Once an instruction is selected, a "fill in the blanks" format is used to input parameters.

Constructing an Si program requires no prior programming experience nor does it require learning a programming language. Si Programmer generates the actual motion control program, based on user selected parameters, thereby eliminating syntax errors. Once created, programs are easily downloaded, uploaded, saved and printed.

Si Programmer also provides the capability to control digital inputs and outputs, useful for interfacing with external equipment like PLCs, sensors, end-of-travel switches, and more. Si Programmer has found success in all types of applications, from simple linear actuator applications to complete machine control with operator interface applications.

注文する（部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)

他のお客様はこのような商品も購入しています。: このアイコンをクリックすると、このモデルを購入した他のお客様の購入商品リストが表示されます.

部品番号/Desc.

注文数

商品説明

3540i

¥146,575 (税込)
(税抜価格 ¥133,250)

納期: 2 週間

Programmable step motor index drive

Recommended Motors

OMHT17-075

¥25,031 (税込)
(税抜価格 ¥22,755)

納期: 12 週間

NEMA 17, 62.8 oz-in holding torque

OMHT17-275

¥18,359 (税込)
(税抜価格 ¥16,690)

納期: 6 週間

NEMA 17, 62.3 oz-in holding torque

OMHT17-278

¥21,709 (税込)
(税抜価格 ¥19,735)

納期: 4 週間

NEMA 17, 113 oz-in holding torque

OMHT23-393

お問い合せ下さい

納期:

NEMA 23, 76.6 oz-in holding torque

OMHT23-593

¥21,709 (税込)
(税抜価格 ¥19,735)

納期: 6 週間

NEMA 23, 79.3 oz-in holding torque

OMHT24-100

¥24,387 (税込)
(税抜価格 ¥22,170)

納期: 6 週間

NEMA 24, 123 oz-in holding torque

OMHT23-397

お問い合せ下さい

納期:

NEMA 23, 177 oz-in holding torque

OMHT23-597

¥24,184 (税込)
(税抜価格 ¥21,985)

納期: 10 週間

NEMA 23, 177 oz-in holding torque

OMHT23-400

お問い合せ下さい

納期:

NEMA 23, 264 oz-in holding torque

OMHT23-600

¥35,618 (税込)
(税抜価格 ¥32,380)

納期: 2 週間

NEMA 23, 264.8 oz-in holding torque

Double Shaft Motors (required for encoder mounting)

OMHT17-075-D

¥26,956 (税込)
(税抜価格 ¥24,505)

納期: 18 週間

NEMA 17, 62.8 oz-in holding torque, double shaft

OMHT17-275-D

¥20,119 (税込)
(税抜価格 ¥18,290)

納期: 6 週間

NEMA 17, 62.3 oz-in holding torque, double shaft

OMHT23-393-D

お問い合せ下さい

納期:

NEMA 23, 76.6 oz-in holding torque, double shaft

OMHT23-593-D

¥23,474 (税込)
(税抜価格 ¥21,340)

納期: 6 週間

NEMA 23, 79.3 oz-in holding torque, double shaft

OMHT24-100-D

¥26,312 (税込)
(税抜価格 ¥23,920)

納期: 6 週間

NEMA 24, 123 oz-in holding torque, double shaft

OMHT23-397-D

お問い合せ下さい

納期:

NEMA 23, 177 oz-in holding torque, double shaft

OMHT23-597-D

¥23,584 (税込)
(税抜価格 ¥21,440)

納期: 2 週間

NEMA 23, 177 oz-in holding torque, double shaft

OMHT23-400-D

お問い合せ下さい

納期:

NEMA 23, 264 oz-in holding torque, double shaft

OMHT23-600-D

¥37,224 (税込)
(税抜価格 ¥33,840)

納期: 6 週間

NEMA 23, 264.8 oz-in holding torque, double shaft

Accessories

ENC-1000-175

お問い合せ下さい

納期:

Accessory daughterboard for Encoder inputs + RS485 comm

ENC-1000i

お問い合せ下さい

納期:

Differential encoder for NEMA 11/14/17 motors, 1000-line, with index pulse

ENC-1000i-23

お問い合せ下さい

納期:

Differential encoder for NEMA 23/24 motors, 1000-line, with index pulse

ENC-CA-4217-6FT

お問い合せ下さい

納期:

Encoder cable, 2 m (6')

ENC-CA-4217-10FT

お問い合せ下さい

納期:

Encoder cable, 3 m (10')

ENC-CA-4217-20FT

お問い合せ下さい

納期:

Encoder cable, 6 m (20')

MMI-01

お問い合せ下さい

納期:

Operator Interface

HUB 444 DIN RAIL

お問い合せ下さい

納期:

Multi-axis network hub with DIN rail mounting kit

OM-CONV-USB

¥5,172 (税込)
(税抜価格 ¥4,702)

納期: 2 週間

USB to RS232 Interface Converter; USB-A to DB9-male

OMPS150A24

お問い合せ下さい

納期:

Stepper drive power supply, 24 VDC, 6.3A

Power Cord-SE

¥2,574 (税込)
(税抜価格 ¥2,340)

納期: 5 週間

AC Power cord with stripped end termination

SI-PROG-CBL

¥6,688 (税込)
(税抜価格 ¥6,080)

納期: 2 週間

Replacement programming cable (comes with drive)

DRIVE-CBL

お問い合せ下さい

納期:

Replacement MMI and/or HUB communications cable (comes with MMI-01 and HUB 444)

DSUB-9-MF

お問い合せ下さい

納期:

DIN rail interface module, 9-pin

DSUB-25-MF

お問い合せ下さい

納期:

DIN rail interface module, 25-pin

DSUB-9-MF-CBL

¥10,252 (税込)
(税抜価格 ¥9,320)

納期: 2 週間

DSUB cable, 9-pin, 2 m (6.6'), male/female connectors

DSUB-25-MF-CBL

¥13,860 (税込)
(税抜価格 ¥12,600)

納期: 2 週間

DSUB cable, 25-pin, 2 m (6.6'), male/female connectors

注: Programming cable included. Software is a free download; click on "Software" icon below the picture. To see torque-speed curves for recommended motors, click on "Specs" above.
Ordering Example: (1) 3540I Programmable step motor indexer/drive, ¥133,250 plus (1) OM-CONV-USB USB to RS-232 Interface Converter, ¥4,702 plus (1) OMHT17-075 NEMA 17 stepper motor, 62.8oz-in holding torque, ¥22,755 , ¥133,250 + 4,702 + 22,755 = ¥160,707

製品マニュアル:

ダウンロード 3540i Series - Programmable Step Motor Driver

ダウンロード STM, ST, Stac6, 1240i, 3540i, si3540 Series - Si Command Language (SCL) for Stepper Drives