Microstepping Motor Drives

3540M

スクロールダウンし、全ラインアップをご覧ください

注文する

DC Bus Voltage 12 to 40 Vdc Motor Supply
Switch Selectable Motor Currents from 0.4 to 3.5 A/Phase
Optically Isolated 5 Vdc Inputs for Step, Direction and Enable
Enable Input to Turn Off Current to the Motor
Screw Terminal Connectors
MOSFET, Dual H-Bridge, Inaudible PWM Amplifier
Pulse Width Modulated Current Control

モータ - 関連する商品を探す
（見つからない場合はカスタマーサービスにご連絡ください）

商品説明

The 3540M/MO step motor drivers are microstepping drives with up to 12,800 steps per revolution, with MOSFET three state switching amplifiers and optoisolated circuits. Both drives include 5 optically isolated inputs, and the 3540MO features external speed control, tach output, and internal pots for accel/decel rate along with high/low speed range selection.

The 3540M drive is a step and direction drive, and includes an automatic feature (switch selectable) to lower motor current by 50% anytime the motor is left at rest for more than one second. Additionally there is a switch-selectable self-test which rotates the motor 1/2 revolution in each direction at 100 steps/second. This drive is compatible with PLCs which feature high-speed pulse output, such as our ELC-PLC series and OCS XL series.
Note: the Step, Direction, and Enable inputs are +5V-logic compatible. For operation with +24V signals, a 3600-ohm series resistor is required on each input. See the drive manual for details.

The 3540MO drive has an on-board oscillator which allows the motor speed to be controlled by an analog voltage or external joystick. This drive is ideal for continuous motion applications such as mixers and blenders. A tach output is also available on this drive.

Motor current for both drives is selected from 32 levels by a DIP switch. Microstepping resolution is selectable by DIP switch on the 3540M. On the 3540MO, microstepping resolution is fixed at 12,800 steps/revolution.

Learn more about stepper motors and drives: Introduction to Stepper Motors and Drives

Click here for more info on the ELC series PLC: ELC-PLC Series

Click here for more info on the OCS XL series PLC: OCS XL Series

Power Supply (Required for Drive Operation): Recommended: OMPS150A24

注文する（部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)

他のお客様はこのような商品も購入しています。: このアイコンをクリックすると、このモデルを購入した他のお客様の購入商品リストが表示されます.

部品番号/Desc.

注文数

商品説明

3540M

お問い合せ下さい

納期:

Microstepping step motor drive, 3.5 A/phase, 40 VDC

3540MO

お問い合せ下さい

納期:

Microstepping step motor drive with digital oscillator

Recommended Motors

OMHT17-075

¥25,031 (税込)
(税抜価格 ¥22,755)

納期: 12 週間

NEMA 17, 62.8 oz-in holding torque

OMHT17-275

¥18,359 (税込)
(税抜価格 ¥16,690)

納期: 6 週間

NEMA 17, 62.3 oz-in holding torque

OMHT17-278

¥21,709 (税込)
(税抜価格 ¥19,735)

納期: 4 週間

NEMA 17, 113 oz-in holding torque

OMHT23-393

お問い合せ下さい

納期:

NEMA 23, 76.6 oz-in holding torque

OMHT23-593

¥21,709 (税込)
(税抜価格 ¥19,735)

納期: 6 週間

NEMA 23, 79.3 oz-in holding torque

OMHT24-100

¥24,387 (税込)
(税抜価格 ¥22,170)

納期: 6 週間

NEMA 24, 123 oz-in holding torque

OMHT23-397

お問い合せ下さい

納期:

NEMA 23, 177 oz-in holding torque

OMHT23-597

¥24,184 (税込)
(税抜価格 ¥21,985)

納期: 10 週間

NEMA 23, 177 oz-in holding torque

OMHT23-400

お問い合せ下さい

納期:

NEMA 23, 264 oz-in holding torque

OMHT23-600

¥35,618 (税込)
(税抜価格 ¥32,380)

納期: 2 週間

NEMA 23, 264.8 oz-in holding torque

Accessories

OMPS150A24

お問い合せ下さい

納期:

Stepper drive power supply, 24 VDC, 6.3A

Power Cord-SE

¥2,574 (税込)
(税抜価格 ¥2,340)

納期: 5 週間

AC Power cord with stripped end termination

注: To see torque-speed curves for recommended motors, click on "Specs" above.
Ordering Example: (1) OMHT23-597 NEMA 23 stepper motor, 177oz-in holding torque, ¥21,985