Thermocouple Calibrator - Discontinued

CL130

スクロールダウンし、全ラインアップをご覧ください

注文する

Measure and Source Thermocouples
Large, Easy-to-Read Display with Backlight
Thermocouple Simulation (Manual or Auto)
3 Programmable Step and Ramp Routines
Auto Step Simulation (0 to 100% or 25% Increments) with Definable LRV & URV

校正器 - 関連する商品を探す
（見つからない場合はカスタマーサービスにご連絡ください）

商品説明

The CL-130 model has been discontinued. Please see the CL541-Plus as a possible alternative or contact our Temperature Engineering department.

The CL130 thermocouple calibrator has been designed using the latest technology to provide reliable accuracy throughout its entire operating temperature range. The compact design makes the unit easy to carry and the intuitive user interface makes it easy to use. Temperature measurements/simulations are displayed on a large, easyto- read liquid crystal display (LCD). This unit has two backlights: a green backlight which is user activated to improve readability in low light conditions, and an automatic red backlight which indicates an over-range condition. Twelve keys provide access to the functional modes and menus, including measure, simulate, setup, run, record, edit, and backlight activation.

SPECIFICATIONS
mV Range, Accuracy: -15 to 80 mV, 0.005% Rdg ±6 mV
mV Temp. Effect: ±2 µV/°C (Ref. Temp = 23°C)
Cold Junction Effect: ±0.05°C/°C
Cold Junction Accuracy: ±0.1°C at 25°C
Resolution:
    Thermocouple Types E, J, K, N, T: 0.1°C
    Thermocouple Types B, R, S: 1°C
    mV: 0.001 mV (1 µV)
Environmental:
    Storage: -40 to 85°C (-40 to 185°F)
    Operating: -10 to 50°C (14 to 122°F)
    Humidity: 10 to 90% RH
    Maximum Input Voltage: 30 Vdc
Power Requirement
    Batteries: 3 “AA” batteries (included), field replaceable
Dimensions:
    Enclosure: 165 H x 81 W x 28 mm D (6.5 x 3.2 x 1.1")
Polycarbonate, Permanently Static Dissipative, ESD Protection Enclosure with Boot: 173 H x 89 W x 33 mm D (6.8 x 3.5 x 1.3")

注文する（部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)

他のお客様はこのような商品も購入しています。: このアイコンをクリックすると、このモデルを購入した他のお客様の購入商品リストが表示されます.

部品番号/Desc.

注文数

商品説明

CL130

お問い合せ下さい

納期:

Thermocouple calibrator

CL130-NIST

お問い合せ下さい

納期:

Thermocouple calibrator with NIST traceable certificate of calibration†

Accessories

CL130-CASE

お問い合せ下さい

納期:

Carrying case

CL-300-CABLE-J-2

¥4,389 (税込)
(税抜価格 ¥3,990)

納期: 5 週間

0.6 m (2') thermocouple cable, SMP male to spade lugs, type J

CL-300-CABLE-K-2

¥4,061 (税込)
(税抜価格 ¥3,692)

納期: 5 週間

0.6 m (2') thermocouple cable, SMP male to spade lugs, type K

CL-300-CABLE-T-2

¥4,061 (税込)
(税抜価格 ¥3,692)

納期: 5 週間

0.6 m (2') thermocouple cable, SMP male to spade lugs, type T

CL-300-CABLE-E-2

¥4,389 (税込)
(税抜価格 ¥3,990)

納期: 2 週間

0.6 m (2') thermocouple cable, SMP male to spade lugs, type E

CL-300-CABLE-R/S-2

¥3,752 (税込)
(税抜価格 ¥3,411)

納期: 5 週間

0.6 m (2') thermocouple cable, SMP male to spade lugs, type R and S

CL-300-CABLE-J-10

¥8,778 (税込)
(税抜価格 ¥7,980)

納期: 2 週間

3 m (10') thermocouple cable, SMP male to spade lugs, Type J

CL-300-CABLE-K-10

¥8,949 (税込)
(税抜価格 ¥8,135)

納期: 5 週間

3 m (10') thermocouple cable, SMP male to spade lugs, Type K

CL-300-CABLE-T-10

¥8,778 (税込)
(税抜価格 ¥7,980)

納期: 5 週間

3 m (10') thermocouple cable, SMP male to spade lugs, Type T

CL-300-CABLE-E-10

¥8,778 (税込)
(税抜価格 ¥7,980)

納期: 5 週間

3 m (10') thermocouple cable, SMP male to spade lugs, Type E

CL-300-CABLE-R/S-10

¥8,778 (税込)
(税抜価格 ¥7,980)

納期: 5 週間

3 m (10') thermocouple cable, SMP male to spade lugs, Type R and S

注: Comes complete with operator’s manual, shock resistant holster, 3 “AA” alkaline batteries.