Accurate to ±0.2°C (±0.4°F) with 0.1 or 0.01° Resolution
Direct Temperature Input/Output
Eight Standard T/C Types Available: J, K, E, T, R, S, B, N, and mV
Eight RTD Curves Available in Platinum, Copper, and Nickel
Auto Detection of 2-, 3-, or 4-Wire Connection Indicator
Guaranteed to Work with All Pulsed Instruments
Compatible with Devices Using Pulsed Excitation Currents, Including PLCs, DCS, and Recorders
EZ-Dial™ Knob Easily Adjusts Output by 0.1°
EZ-Check™ Switch for 0 and 100% Span Adjustments
Store New EZ-Check™ Values by Pressing the EZ-Dial Knob
Selectable Auto-Stepping
Superior Battery Life of 45 Hours under Typical Continuous Usage
NIST-Traceable Calibration Certificate Included
商品説明
The CL543 model has been discontinued. Please see the CL543B RTD and thermocouple calibrator as a possible alternative or contact our Temperature Engineering department.
The OMEGA™ CL543 dual T/C and
RTD calibrator provides direct
temperature calibration to all types
of instruments such as transmitters,
recorders, controllers, alarms, and
data acquisition and computer
systems. The CL543 also reads
RTD and T/C outputs and displays
temperature. It is compatible with
pulsed systems and transmitters
and has a feature for
troubleshooting. The auto detection
of 2-, 3-, or 4-wire connections will
tell you if you have the wires
correctly connected. You can also
select “auto stepping,” which offers
selectable step sizes and time
in-between steps. This calibrator is
a superior replacement for decade
boxes, eliminating the lugging
around of large equipment and the
possibility of misreading RTD
tables.
The CL543 offers the highest
performance and the most features
in its class by exceeding the
accuracy and functions of many
higher priced T/C and RTD
calibrators. It is a low-cost solution
for checkout and calibration of all
T/C and RTD instruments in the
field, shop, or control room.
注: The CL543 come with NIST certification, operator’s manual and 9 V battery. Ordering Example: (1) CL543 Dual thermocouple and RTD calibrator, ¥377,565
