1/8 & 1/4 DIN Temperature/Process Controllers with Adaptive Tuning and Modular Output and Communications Options

CN1611 & CN1621 Series

スクロールダウンし、全ラインアップをご覧ください

注文する

Universal Input: Thermocouple, RTD, Current & Voltage
Adaptive Auto tuning
Bumpless Auto/Manual Operation
Ramp to Setpoint
Dual Display
1.0°or 0.1° Resolution
3 Output Capability
Universal Power: 90 to 264 Vac
NEMA-4 (IP65) Front Panel Standard
Configuration Port

Optional Features
Plug-in Output Modules (for Outputs 2 & 3)
Low Voltage Power: 25 to 50 Vac/22 to 65 Vdc
24 Vdc Transmitter Power Supply
RS-485 Communications
Software and Cable for the Configuration Port
Analog Retransmission Output

商品説明

Easy programming and operational simplicity are the mainstays of the entire CN1600 Series. The adaptive autotune feature provides better overall control with accurate hands-free tuning and tighter control while minimizing over-shoot. The CN1600 Series offers a choice of full PID, Heat-Cool, or On-Off control with up to two alarms. This allows the CN1600 Series to handle virtually any application. Its unique loop break alarm provides process loop problem identification without the need for the additional external hardware required by “heater break protection” controllers. The CN1611 and CN1621 Series feature a 24 Vdc transmitter power supply. They also have a configuration port that allows them to be programmed off-line from a PC or laptop computer. This feature offers faster configuration of multiple units along with the ability to store programming on disk for future reference.

Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for all available models.
For complete product specifications see the Related Links section at the bottom of this page.

注文する（部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)

部品番号/Desc.

注文数

商品説明

BD1600-R

お問い合せ下さい

納期:

2 A relay output

BD1600-DC

お問い合せ下さい

納期:

dc pulse output

BD1600-F

お問い合せ下さい

納期:

Analog output

BD1600-C4

お問い合せ下さい

納期:

RS-485 communications

注: * For configuration only through configuration port; not used with RS-485 communications. Optional Plug-in Boards.
Each of the above cards occupies one card slot in the unit. Only one transmitter power supply can be purchased per unit. Reprogramming of controller is necessary when installing plug-in boards.

部品番号ビルダー

下記から仕様構成を選択し、ご注文ください

(1)	(2)	(3)	(4)

以下からオプションを選択:

(1) Temperature/Process Controllers :
CN1611- : 1/8 DIN controller
CN1621- : 1/4 DIN controller

(2) Output 1 :
DC1 : Single dc pulse
F1 : Single analog
R1 : 2 amp relay

(3) Output 2 :
オプション選択がない場合 : Unit with output 1
-DC2 : dc pulse
-F2 : analog
-R2 : 2 amp relay

(4) Output 3 :
オプション選択がない場合 : Unit with output 1 and 2
-R3 : 2 amp relay
-R3-C4 : 2 amp relay and RS-485 communications
-C4 : RS-485 communications

注: 有効な部品番号については、「商品仕様(PDF)」を参照ください。
ご不明な場合は、カスタマーサービス(0120-040-572 もしくは jpesales@dwyeromega.com)へお問合せください。