Temperature, Process and Strain Wall Mount Panel Meter/Controller - Discontinued

CNi8C-EN Series

Wall Mount Panel Meter / PID Controller

スクロールダウンし、全ラインアップをご覧ください

注文する

Easy-to-Use Digital Controller with PID and Ramp/Soak
Bright Programmable 3-Color Changing Display
Universal Inputs: Thermocouple, RTD, Process Voltage/Current, Strain
2 Control or Alarm Outputs, Choice of:
Mechanical Relays
Solid State Relays
Analog Voltage and Current
Sealed Enclosure, NEMA 4 (IP65)
Fuses for SSR or Relay Outputs
120/240 Vac Operation

商品説明

*For our newest line of controllers with Modbus connectivity, expanded ramp and soak programs, universal inputs, and simple PC programming, visit our CNPT Series.*

Starting from May 1st 2018, CNI8C-EN Series have been discontinued. As a possible substitute, please check out the CND3 Series with some Enclosure for details.

The CNi8C-EN is a compact, wall-mountable meter/controller that can be used for applications that need a fixed location, when a control panel is not required. The meter/controller supports a variety of temperature and process, or strain and process inputs. The flip-top enclosure makes programming and wire access easy to use.
Specifications Weight: 1.22 Kg (2.7 lb) Dimensions: 206 H x 183 W x 124 mm D (8.1 x 7.2 x 4.9") Operating Temperature: 0 to 50°C (32 to 122°F) Line Voltage/Power:90-240 Vac ±10%, 50-400 Hz (110-375 Vdc, equivalent voltage)

注文する（部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)

部品番号/Desc.

注文数

商品説明

CNi8C22-EN

お問い合せ下さい

納期:

Wall mount enclosure with temperature/process controller with two SSR outputs

CNi8C33-EN

お問い合せ下さい

納期:

Wall mount enclosure with temperature/process controller with two form C relay outputs

CNi8C33-C24-EN

お問い合せ下さい

納期:

Wall mount enclosure with temperature/process controller with two form C relay outputs, RS232 and RS485 serial communication

CNi8C52-C24-EN

お問い合せ下さい

納期:

Wall mount enclosure with temperature/process controller with one analog and one SSR outputs, RS232 and RS485 serial communication

CNi8C53-EN

お問い合せ下さい

納期:

Wall mount enclosure with temperature/process controller with analog and one form C relay outputs,120 Vac power cord

CNiS8C33-EN

お問い合せ下さい

納期:

Wall mount enclosure with strain/process controller with two form C relay outputs

CNiS8C52-EN

お問い合せ下さい

納期:

Wall mount enclosure with strain/process controller with one analog and one SSR outputs

DPi8C-EN

お問い合せ下さい

納期:

Wall mount enclosure with temp/process meter, no outputs

注: Comes complete with meter/controller, one power fuse, output fuses as required, and owners manual.

部品番号ビルダー

下記から仕様構成を選択し、ご注文ください

(1)	(2)	(3)	(4)
				-EN

以下からオプションを選択:

(1) Model :
CNi8C : Temperature/Process Wall Mount Digital Controller
CNiS8C : Strain/Process Wall Mount Digital Controller

(2) Control Outputs #1 & 2 Direct (Cool) or Reverse (Heat) Acting :
22 : Two solid state relays (SSRs) 0.5 A @ 120/240 Vac continuous
23 : SSR and relay Form C SPDT 3 A @ 120 Vac 3 A @ 240 Vac
33 : 2 Relays Form C SPDT 3 A @ 120 Vac 3 A @ 240 Vac
52 : Analog Output selectable as either control or retransmission of process value 0 to 10 Vdc or 0-20 mA @ 500 ohm max. and SSR
53 : Analog Output 0 to 10 Vdc or 0-20 mA @ 500 ohm max. and Relay

(3) Network Options :
オプション選択がない場合 : No network option
-C24 : Isolated RS232 and RS485 300 to 19.2 k baud

(4) Factory Setup Option :
オプション選択がない場合 : no option
-FS : Factory Setup and Configuration

注: 有効な部品番号については、「商品仕様(PDF)」を参照ください。
ご不明な場合は、カスタマーサービス(0120-040-572 もしくは jpesales@dwyeromega.com)へお問合せください。