Dual Channel Autotune Temperature Controllers

CYC325

Cryogenic Temperature Controller

スクロールダウンし、全ラインアップをご覧ください

注文する

製品情報が英文ですが、日本でお買い求め頂けます。
カスタマーサービスにて日本語でのサポートを致します。
Operates Down to 1.2 K with Appropriate Sensors
2 Sensor Inputs
Supports Diode, RTD, and Thermocouple Sensors
Sensor Excitation (Current Reversal Eliminates Thermal EMF Errors for Resistance Sensors)
2 Autotuning Control Loops: 25 and 2 W Max
Control Loop 2: Variable Vdc source from 0 to 10 V Max
IEEE-488 and RS232C Interfaces

極低温素子 - 関連する商品を探す
（見つからない場合はカスタマーサービスにご連絡ください）

商品説明

The CY325 Series dual-channel temperature controller is capable of supporting nearly any diode, RTD, or thermocouple temperature sensor. Two independent PID control loops with heater outputs of 25 and 2 W are configured to drive either a 50 or 25 Ù load for optimal control flexibility. Designed with ease of use, functionality, and value in mind, the CYC325 Series is ideal for general-purpose laboratory and industrial temperature measurement and control applications.

SPECIFICATIONS
Thermometry
Number of Inputs: 2
Input Configuration: Each input is factory configured for either diode/RTD or thermocouple
Isolation: Sensor inputs optically isolated from other circuits but not each other
A/D Resolution: 24-bit
Input Accuracy: Sensor dependent, refer to input specifications table
Measurement Resolution: Sensor dependent, refer to input specifications table
Max Update Rate: 10 rdg/s on each input (except 5 rdg/s on input A when configured as thermocouple)
Filter: Averages 2 to 64 input readings
Sensor Input Configuration Diode/RTD:
    Measurement Type: 4-lead differential
    Excitation: Constant current with current reversal for RTDs
    Supported Sensors: Diodes, silicon, GaAlAs; RTDs, 100 ΩPlatinum, 1000 Ω Platinum, germanium, carbon-glass, CernoxTM, and RoxTM
    Standard Curves: CY7 and CY670, PT-100, PT-1000, RX-102A, RX-202A
    Input Connector: 6-pin DIN
Thermocouple:
    Measurement: 2-lead, room temperature, compensated
    Excitation: N/A
    Supported Sensors: Most thermocouple types
    Standard Curves: Type E, Type K, TypeT, AuFe 0.07% vs Cr, AuFe 0.03% vs Cr
    Input Connector: Ceramic isothermal block

Control
Control Loops: 2
Control Type: Closed loop digital PID with manual heater output or open loop
Tuning: Autotune (1 loop at a time), PID, PID zones
Control Stability: Sensor dependent, see input specification table
PID Control Settings:
    Proportional (Gain): 0 to 1000 with 0.1 setting resolution
    Integral (Reset): 1 to 1000 (1000/s) with 0.1 setting resolution
    Derivative (Rate): 1 to 200% with 1% resolution
Manual Output: 0 to 100% with 0.01% setting resolution
Zone Control: 10 temperature zones with P, I, D, manual heater out, and heater range
Setpoint Ramping: 0.1 K/min to 100 K/min
Safety Limits: Curve temperature, power up heater off, short circuit protection
Front Panel:
    Display: 2-line, 20-character, liquid crystal display with 5.5 mm (0.216") character height
    Number of Reading Displays: 1 to 4
    Display Units: K, °C, V, mV,
Reading Source: Temperature, sensor units
    Display Update Rate: 2 rdg/s
    Temp Display Resolution: 0.001° from 0 to 99.999°, 0.01° from 100 to 999.99°, 0.1° above 1000°
    Sensor Units Display Resolution: Sensor dependent; to 5 digits
    Other Displays: Setpoint, heater range, and heater output; user selected
Setpoint Setting Resolution: Same as display resolution (actual resolution is sensor dependent)
Heater Output Display: Numeric display in percent of full scale for power or current
Heater Output Resolution: 1%
Display Annunciators: Control input, remote, autotune
Keypad: 20-key membrane, numeric and specific functions
Front Panel Features: Front panel curve entry, keypad lock-out

Interface
IEEE-488 Interface Features: SH1, AH1, T5, L4, SR1, RL1, PP0, DC1, DT0, C0, E1
Reading Rate: To 10 rdg/s on each input
Software Support: LabVIEWTM driver; consult factory for availability
Serial Interface:
    Electrical Format: RS232C
    Baud Rates: 9600, 19200, 38400, 57600
Connector: 9-pin D-style, DTE configuration
Reading Rate: To 10 rdg/s, each input

General
Ambient Temperature: 15 to 35 °C (59 to 95ºF) at rated accuracy, 5 to 40 °C (41 to 104ºF) at reduced accuracy
Power Requirement: Standard 120 Vac, optional 240 Vac, 6%, -10%, 50 or 60 Hz, 85 VA
Dimensions: 89 H x 216 W x 368 mm D (3.5 x 8.5 x 14.5"), half rack
Weight: 4.00 kg (8.82 lb)
Approval: CE mark

Input Specifications

	Sensor Temp Coefficient	Input Range	Excitation Current	Display Resolution	Measurement Resolution	Electronic Accuracy (at 25°C)	Electronic Control Stability¹
Diode	Negative	0 to 2.5 V	10 µA ±0.05%^2,3	100 µV	0.4 µV	±80 µV ±0.005% of rdg	±20 µV
Diode	Negative	0 to 7.5 V	10 µA ±0.05%^2,3	100 µV	10 µV	±80 µV ±0.001% of rdg	±40 µV
PTC RTD	Positive	0 to 500ø	1 mA⁴	10 mø	2 mø	±0.004ø ±0.01% of rdg	±4 mø
PTC RTD	Positive	0 to 5000ø	1 mA⁴	100 mø	20 mø	±0.004ø ±0.02% of rdg	±40 mø
NTC RTD	Negative	0 to 7500ø	10 µA ±0.05%	100 mø	40 mø	±0.1ø ±0.04% of rdg	±80 mø
Thermocouple	Positive	±25 mV	N/A	1 µV	0.4 µV	±1 µV ±0.05% of rdg⁵	±0.8 µV
Thermocouple	Positive	±50 mV	NA	1 µV	20 µV	±1 µV ±0.05% of rdg⁵	±0.8 µV

1 Control stability of the electronics only, in ideal thermal system
2 Current source error has negligible effect on measurement accuracy
3 Diode input excitation can be set to 1 mA
4 Current source error is removed during calibration
5 Accuracy specification does not include errors from room temperature compensation

注文する（部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)

部品番号/Desc.

注文数

商品説明

CYC325

¥1,549,048 (税込)
(税抜価格 ¥1,408,225)

納期: 10 週間

2 diode/RTD inputs

CYC325-T1

お問い合せ下さい

納期:

1 diode/RTD, 1 thermocouple input

CYC325-T2

お問い合せ下さい

納期:

2 thermocouple inputs

Accessories

CYC-6201

お問い合せ下さい

納期:

1 m (3.3' long) IEEE-488 (GPIB) computer interface cable assembly

CYC-CAL-325-CERT

お問い合せ下さい

納期:

Instrument recalibration with certificate, no points

CYC-CAL-325-DATA

お問い合せ下さい

納期:

Instrument recalibration with certificate and data

CYC-RM-1/2

¥90,508 (税込)
(税抜価格 ¥82,280)

納期: 8 週間

Rack mount kit for mounting one 1/2 rack temperature controller in 482.60 mm (19") rack, 90 mm (3.5") high

CYC-RM-2

¥100,188 (税込)
(税抜価格 ¥91,080)

納期: 8 週間

Rack mount kit for mounting two 1/2 rack temperature controllers in 482.60 mm (19") rack, 135 mm (5.25") high

CYC-106-009

¥4,906 (税込)
(税抜価格 ¥4,460)

納期: 8 週間

Heater output connector, dual banana jack

CYC-106-233

¥5,242 (税込)
(税抜価格 ¥4,765)

納期: 8 週間

6-pin male input connector

CYC-106-735

¥6,892 (税込)
(税抜価格 ¥6,265)

納期: 8 週間

Terminal block, 2-pin

注: Comes with heater output connector (dual banana jack), sensor input mating connector (6-pin DIN plugs), terminal block (2-pin), power cord and operator’s manual.
Add suffix "-240" for 240 Vac power supply, no additional cost.
Ordering Example: (1) CYC325 2 inputs silicon diode/RTD controller, ¥1,408,225 plus (1) CYC325 2 inputs silicon diode/RTD controller, ¥1,408,225, ¥1,408,225 + 1,408,225 = ¥2,816,450

製品マニュアル:

ダウンロード CYC325, CYC325-T1, CYC325-T2 - Cryogenic Temperature Controller