Low cost, 3-1/2 Digit Voltmeters, 1/8 DIN

DP301AN

Low cost, DC Voltmeter

スクロールダウンし、全ラインアップをご覧ください

注文する

±1999 Count Display Span
±200 mV to ±200 Vdc Ranges
True-Differential Input with 80 dB CMR
3-Wire Ratio Input
Bright, 14 mm (0.56") LED Display
Automatic Zero and Polarity
Display Hold and Test
115/230 Vac Power
1/8 DIN Case

Options
Isolated 9 to 32 Vdc Power
Isolated 26 to 56 Vdc Power
Screw-Terminal Barrier Strip
NEMA 4 (IP65) Splash-Proof Lens Cover

プロセス計測 / 制御機器 - 関連する商品を探す
（見つからない場合はカスタマーサービスにご連絡ください）

商品説明

The DP301AN is a low-cost 3-1/2 digit DC voltmeter. It fits in a standard 1/8 DIN panel cutout and require a depth of less than 104 mm (4.1") behind the panel. With the addition of a screw-terminal barrier strip, it becomes a low-cost, pin-compatible alternative to the DP2000A and DP2000B in applications where indication-only is required.

INPUT RANGES
The DP301AN offer voltage ranges of ±0.1999V, ±1.999V, ±19.99V and ±199.9 Vdc. The input is true-differential, with excellent common-mode noise rejection (CMR). By using an external DC voltage reference, any of these ranges can further be configured for 3-wire ratio measurement with readout from 0 to 1.999.

OPTIONS
The DP301AN can be configured for four voltage input ranges, three decimal-point positions, and high-impedance 3-wire ratio input. Mechanical options include a screw-terminal barrier strip for signal and power and a splash-proof lens cover which meets NEMA 4 (IP65) standards.

SPECIFICATIONS
Noise Rejection
NMR: 56 dB, 50/60 Hz
CMR, AC GND to SIG GND: 120 dB, DC to 60 Hz
CMR, SIG LO to SIG GND: 80 dB, DC to 60 Hz
CMV, AC GND to SIG GND: 1500 Vp per HV test, 354 Vp per IEC spacing
CMV, SIG LO to SIG GND: ±1 Vp
Power
AC Voltage: 115 or 230 Vac, ±15%
AC Frequency: 49 to 440 Hz
DC Voltages: 9 to 32 Vdc, isolated to 300 Vp; 26 to 56 Vdc, isolated to 300 Vp
Power Consumption: 2.4 W (nominal)
Output Voltages: 4.7 Vdc and -4.6 Vdc ±5%, 10 mA max
Display
Type: 7-segment, red LED
Height: 14 mm (0.56")
Symbols: -1.8.8.8
Decimal Points: Three positions programmable internally or at connector
Overrange Indication: Three least-significant digits blank
Environmental
Operating Temperature: 0 to 60°C
Storage Temperature: - 40 to 85°C
Relative Humidity: 95% at 40°C (non-condensing)
Analog-To-Digital Conversion
Technique: Dual-slope, average-value
Polarity: Automatic
Signal integration period: 100 ms Signals
HOLD and TEST Inputs: TTL or 5V CMOS compatible
Mechanical
Bezel: 96 W x 48 H x 5.1 mm D (3.78 x 1.89 x 0.20")
Depth Behind Bezel: 104 mm (4.09")
Panel Cutout: 92 W x 45 mm H (3.62 x 1.77")
Weight: 14 oz (400 g)
Case Material: 94V-0 UL-rated polycarbonate
Accuracy at 25°C
Maximum Error: ±0.05% of reading ±1 count
Span Tempco: ±0.01% of reading/°C
Step Response: 1 s
Warmup to Rated Accuracy: 10 min
Input Configuration
Configuration: Differential, bipolar
Zero: Automatic
Span Adjustment: ±5%

注文する（部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)

部品番号/Desc.

注文数

商品説明

DP301AN-2

お問い合せ下さい

納期:

3-1/2 digit voltmeter for new applications, ±199.9 mVdc

DP301AN-3

お問い合せ下さい

納期:

3-1/2 digit voltmeter, ±1.999 Vdc input range,115 Vac, 50/60 Hz power

DP301AN-4

お問い合せ下さい

納期:

3-1/2 digit voltmeter, ±19.99 Vdc input range,115 Vac, 50/60 Hz power

DP301AN-4-D4

お問い合せ下さい

納期:

3-1/2 digit voltmeter, ±19.99 Vdc input range,115 Vac, 50/60 Hz power with D4 connector / screw terminal barrier strip.

DP301AN-5

お問い合せ下さい

納期:

3-1/2 digit voltmeter, ±199.9 Vdc input range,115 Vac, 50/60 Hz power.

DP301AN-5-D4

お問い合せ下さい

納期:

3-1/2 digit voltmeter, ±199.9 Vdc input range,115 Vac, 50/60 Hz power with D4 connector / screw terminal barrier strip.

部品番号ビルダー

下記から仕様構成を選択し、ご注文ください

(1)	(2)	(3)	(4)	(5)	(6)	(7)

以下からオプションを選択:

(1) Model :
DP301AN : 3-1/2 digit voltmeter

(2) Input Range :
-2 : ±199.9 mVdc
-3 : ±1.999 Vdc
-4 : ±19.99 Vdc
-5 : ±199.9 Vdc

(3) 3-Wire Ratio Input Impedance (DC input) :
オプション選択がない場合 : Standard
-HZ : High impedance (100 mOhm)

(4) decimal Point :
オプション選択がない場合 : decimal point programmable at D1 connector
-DP1 : 1.999 internally-wired
-DP2 : 19.99 internally-wired
-DP3 : 199.9 internally-wired

(5) Power options :
オプション選択がない場合 : 115 Vac 50/60 Hz power
-C1 : 230 Vac 50/60 Hz
-C3C : Isolated 9 to 32 Vdc
-C3E : Isolated 26 to 56 Vdc

(6) Add-On Option :
オプション選択がない場合 : red LED display
-G : Green LED display

(7) Add-On Option :
オプション選択がない場合 : no option
-D4 : Screw-terminal barrier strip for power and signal (removes power and signal from D1).

注: 有効な部品番号については、「商品仕様(PDF)」を参照ください。
ご不明な場合は、カスタマーサービス(0120-040-572 もしくは jpesales@dwyeromega.com)へお問合せください。