Variable Area Flow Meters - Discontinued

FL-1340 and FL-1440 Series

スクロールダウンし、全ラインアップをご覧ください

Shielded for pressurized systems
Panel mounting design
Non-rising stem needle valve
Compact, 65mm scale
Easy-to-read 150mm scale

商品説明

The FL-1340 and FL-1440 Series has been discontinued. Please see the FL3200, FL3300, FL3400, FL3500 Series as a possible alternative or contact our Flow Engineering department.

SHIELDED FOR PRESSURIZED SYSTEMS
These Variable Area Flow Meters, have heavy wall, precision-bored borosilicate glass metering tubes and are fully shielded against breakage, with end fittings of brass or stainless steel and aluminum side plates. In front, a clear plastic shield keeps the scale clean and easy-to-read, while an opaque white rear shield provides a background to aid in discerning the float position for accurate readings.

PANEL MOUNTING DESIGN
These Variable Area Flow Meters are equipped with horizontal ports with NPT threads for easy panel mounting. The ports have external threads and are equipped with panel retaining nuts. No additional mounting hardware is required. Simply drill two holes 114.3mm (4.5") apart (center to center) for 65mm units or 223.8mm (8 13/16") apart (center to center) for 150mm units. Each hole should be 14.9mm (0.59") in diameter.

NON-RISING STEM NEEDLE VALVE
The 150 mm size flowmeters are also available with non-rising stem type needle valves for special applications. This 15-turn metering valve has superior flow rate control and is particularly well suited for use in chromatography applications. The sliding tapered needle mechanism virtually eliminates sticking or buildup due to foreign matter in the fluid stream, without variations or sawtoothing of the flow rate.

COMPACT 65 MM SCALE
These compact units feature ±10% of full scale accuracy and ±½% of full scale repeatability. They are ideal for applications involving purging, seal oil systems, bearing lubrication, and cooling water flow indication.

EASY-TO-READ 150 MM SCALE
OMEGA's larger units feature 5% accuracy and ¼% repeatability. The scale has more divisions for higher accuracy, is easier to read, and causes less eye fatigue.

APPLICATIONS
Variable Area Flow Meters can be used in many applications, including industrial and laboratory situations. Some common uses include carrier gas flow and fuel flow in chromatography and coolant flow indication.

FLOW CONTROL
Control the flow rate with the standard built-in control valve. Also available, as an option, is an integral flow controller. In addition, 150 mm scale units are available with the unique non-rising stem type needle valve.

WETTED PARTS
Standard floats are 316 stainless steel, glass, and carboloy. Other wetted parts include the glass mtering tube, PTFE float stops, brass, aluminum, or 316 SS end fittings, and Buna (with brass or aluminum construction) or FKM-A (with 316 SS construction) O-rings.

RATINGS AND SPECIFICATIONS
The maximum operating pressure is 13.8 bar (200 psig), at temperatures up to 121°C (250°F). The minimum flow rate at the rated accuracy is 10% of the maximum flow rate. All connections are 1/8" female NPT threaded.

Variable Area Flow Meters with 65 mm Scale Flowtubes¹ (with 6-turn valve)

Aluminum Frame Model No.	Brass Frame Model No.	316 SS Frame Model No.	Max. Flowrate²		Float Material
Aluminum Frame Model No.	Brass Frame Model No.	316 SS Frame Model No.	Air cc/min.	Water cc/min.	Float Material
FL-1341-G	FL-1351-G	FL-1361-G	56.6	0.70	Glass
FL-1341-S	FL-1351-S	FL-1361-S	150	3.00	316SS
FL-1342-G	FL-1352-G	FL-1362-G	66.6	0.80	Glass
FL-1342-S	FL-1352-S	FL-1362-S	183.3	3.67	316SS
FL-1343-G	FL-1353-G	FL-1363-G	400	7.00	Glass
FL-1343-S	FL-1353-S	FL-1363-S	833.3	23.3	316SS
FL-1344-G	FL-1354-G	FL-1364-G	1666	40.0	Glass
FL-1344-S	FL-1354-S	FL-1364-S	3333	100	316SS
FL-1345-G	FL-1355-G	FL-1365-G	5666	142	Glass
FL-1345-S	FL-1355-S	FL-1365-S	10,833	333	316SS
FL-1346-G	FL-1356-G	FL-1366-G	18,333	500	Glass
FL-1346-S	FL-1356-S	FL-1366-S	38,000	1166	316SS
FL-1347-C	FL-1357-C	FL-1367-C	56,666	1666	Carboloy

Minimum flowrate is 10% of the maximum rate shown.

Variable Area Flow Meters with 150 mm Scale Flowtubes^1,3 (with 6 turn valve)

Aluminum Frame Model No.	Brass Frame Model No.	316 SS Frame Model No.	Max. Flowrate²		Float Material
Aluminum Frame Model No.	Brass Frame Model No.	316 SS Frame Model No.	Air cc/min.	Water cc/min.	Float Material
		FL-1461-G	49	0.537	Glass
FL-1441-S		FL-1461-S	146	2.49	316SS
FL-1442-G	FL-1452-G	FL-1462-G	96	1.11	Glass
FL-1442-S	FL-1452-S	FL-1462-S	265	4.93	316SS
FL-1443-G	FL-1453-G	FL-1463-G	370	5.75	Glass
FL-1443-S	FL-1453-S	FL-1463-S	820	20.6	316SS
FL-1444-G	FL-1454-G	FL-1464-G	820	16.6	Glass
FL-1444-S	FL-1454-S	FL-1464-S	1680	46.2	316SS
FL-1445-G	FL-1455-G	FL-1465-G	2350	52.8	Glass
FL-1445-S	FL-1455-S	FL-1465-S	4600	133	316SS
FL-1446-G	FL-1456-G	FL-1466-G	3800	84.6	Glass
FL-1446-S	FL-1456-S	FL-1466-S	7600	218	316SS
FL-1447-G	FL-1457-G	FL-1467-G	8600	200	Glass
FL-1447-S	FL-1457-S	FL-1467-S	16,400	493	316SS
FL-1448-G	FL-1458-G	FL-1468-G	23,500	573	Glass
FL-1448-S	FL-1458-S	FL-1468-S	43,000	1350	316SS
FL-1448-C	FL-1458-C	FL-1468-C	60,000	1950	Carboloy

Minimum flowrate is 10% of the maximum rate shown.
3.Low cost, stainless steel construction unit with 65 mm glass tube also available.

Variable Area Flow Meters with 150 mm Scale Flowtubes¹ (with 15-turn valve)

Aluminum Frame Model No.	Brass Frame Model No.	316 SS Frame Model No.	Max. Flowrate²		Float Material
Aluminum Frame Model No.	Brass Frame Model No.	316 SS Frame Model No.	Air cc/min.	Water cc/min.	Float Material
FL-1471-G		FL-1491-G	49	0.537	Glass
		FL-1491-S	146	2.49	316SS
FL-1472-G	FL-1482-G	FL-1492-G	96	1.11	Glass
	FL-1482-S	FL-1492-S	265	4.93	316SS
FL-1473-G	FL-1483-G	FL-1493-G	370	5.75	Glass
FL-1473-S	FL-1483-S	FL-1493-S	820	20.6	316SS
FL-1474-G	FL-1484-G	FL-1494-G	820	16.6	Glass
FL-1474-S	FL-1484-S	FL-1494-S	1680	46.2	316SS
FL-1475-G	FL-1485-G	FL-1495-G	2350	52.8	Glass
FL-1475-S	FL-1485-S	FL-1495-S	4600	133	316SS
FL-1476-G	FL-1486-G	FL-1496-G	3800	84.6	Glass
FL-1476-S	FL-1486-S	FL-1496-S	7600	218	316SS
FL-1477-G	FL-1487-G	FL-1497-G	8600	200	Glass
FL-1477-S	FL-1487-S	FL-1497-S	16,400	493	316SS
FL-1478-G	FL-1488-G	FL-1498-G	23,500	573	Glass
FL-1478-S	FL-1488-S	FL-1498-S	43,000	1350	316SS
FL-1478-C	FL-1488-C	FL-1498-C	60,000	1950	Carboloy

Minimum flowrate is 10% of the maximum rate shown.

注文する（部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)

他のお客様はこのような商品も購入しています。: このアイコンをクリックすると、このモデルを購入した他のお客様の購入商品リストが表示されます.

部品番号/Desc.

注文数

商品説明

[divider}

お問い合せ下さい

納期:

Aluminum Frame 150mm Variable Area Flow Meter Flowtubes with 15- Turn Valves

FL-1346-G

お問い合せ下さい

納期:

Variable Area Flow Meter 3800 Air cc/min, 84.6 Water cc/min.

FL-1346-S

お問い合せ下さい

納期:

Variable Area Flow Meter 7600 Air cc/min, 218 Water cc/min.

Brass Frame 150mm Variable Area Flow Meter Flowtubes with 15- Turn Valves

FL-1484-S

お問い合せ下さい

納期:

Max Air 1680 cc/min, Water 46.2 cc/min

316SS Frame 150mm Variable Area Flow Meter Flowtubes with 15- Turn Valves

FL-1494-S

お問い合せ下さい

納期:

Max Air 1680 cc/min, Water 46.2 cc/min

注: Comes complete with correlation tables for air and water and operator's manual.

For a glass float, add suffix "-G".

For a 316SS float, add suffix "-S".

For a carboloy float, add suffix "-C".