The FL-1700 Series has been discontinued.
Please see the FL-3000 and 3100
Series as a possible alternative or contact our Flow Engineering department.
The OMEGA ® FL-1700 and FL-1800 glass tube variable area flow meters are similar in design to the FL-1300 and FL-1400 series units, except that these units are designed for use with corrosive fluids. Fluid contact is limited to the glass tube and float, PVDF end fittings, FKM O-Rings and tube packing and the PTFE float stops. No stainless steel wetted parts are employed. These units are also available with an optional integral needle control valve (Note: the valve has 316 SS wetted parts).
SPECIFICATIONS Scales: 65 mm (2.6"), direct reading for air and water Accuracy: ±10% full scale Repeatability: ±0.5% full scale Connections: ¼ NPT, female horizontal Metering Tubes: Borosilicate glass Floats: Glass End Fittings
Seal Spindle: PVDF Side Plates: Aluminum Float Stops: PTFE Tube Packing: FKM O-Rings: FKM Max Pressure: 10.34 bar (150 psig) at 38°C (100°F)
注: Comes complete with operator’s manual.
We noticed you are from the US. Visit your local site for regional offers and live support.
