Paddlewheel Flow Sensors

FP-5100 and FP-5300

^¥79,365 FP-5300

注文する

Accurate to ±0.2 fps
Repeatability at ±0.1 fps
Simple and Accurate Flow Measurement

タービン流量計 (羽根車式) - 関連する商品を探す
（見つからない場合はカスタマーサービスにご連絡ください）

商品説明

Streamline your flow measurement operation with the FP-5100 Series flow sensor. Using this compact flow sensor, a matched sensor installation fitting, an OMEGA™ flow meter or controller, and ordinary handtools, you can assemble a complete flow monitoring or controlling system in minutes. Accurate to ±0.2 fps, with repeatability at ±0.1 fps, this insertion sensor operates on a simple electromechanical principle, proven in thousands of liquid flow applications worldwide. It all adds up to precision, dependability, and convenience– basic advantages that are quickly surpassing its in-line competition.

Convert your maintenance hours into minutes with the FP-5300. Should a sensor, rotor, or O-ring need to be replaced, it takes only seconds. Reduce your system downtime substantially with a stand-alone FP-5300 sensor, or simply add a Wet Tap Assembly and eliminate downtime completely. Combined with the FP-5300 during initial installation, the Wet Tap allows sensor removal without system shut-down. Optional local or remote capability lets you place your meter up to 200 feet away without signal amplification, and you can install the FP-5300 in pipe sizes ranging from 1/2 inch to 36 inches without a lot of additional cost, because the price of the FP-5300 increases only slightly for larger pipe sizes.

Available in a choice of chemically resistant, non-contaminating housing materials, the FP-5300 stands up to the harshest environments. The glass-filled polypropylene housing version is lightweight but strong, which makes it ideal for handling a wide range of liquids, including corrosive fluids in chemical processing. For processes involving acids and solvents, the PVDF (polyvinylidene fluoride) housing version is a tough fluorocarbon that is highly resistant to more severe fluids.

The sensor works on a simple but precise electromechanical principle based on measuring the rate and volume of flow in your pipe. Four permanent magnets, imbedded in the rotor blades, spin past a coil in the sensor body. As the fluid flow causes the rotor to move, a sine wave signal is produced, directly proportional to the flowrate. The patented “open cell” feature of the rotor ensures a linear, repeatable output, up to 20 fps, with accuracy of ±0.2 fps. The result is minimal head loss and no cavitation.

Designed to allow optional conduit installation, the FP-5300 easily lets you comply with local codes requiring conduit protection. For instance, pry off the plug on top of the sensor: underneath, you’ll find a 1/2 FNPT thread. Using an optional conduit adaptor fitting kit, you can connect your conduit FPM-5000-SCAK conduit adaptor kit), and an optional instrument back-cover kit will provide everything you need for quick conduit connection to a meter or controller. Additionally, you can adapt to both rigid and flexible liquid-tight conduits, protecting your system hookup from harsh elements and mechanical damage.

Flow Range

Pipe
Size

½"

¾"

1¼"

1½"

2½"

10"

12"

Range
(gpm)

1
to
19

1.7
to
34

2.7
to
54

4.7
to
94

6.4
to
127

10.6
to
210

15
to
300

24
to
461

40
to
794

63
to
1247

91
to
1801

156
to
3119

246
to
4915

349
to
6977

SPECIFICATIONS
Accuracy: ±1% full scale
Output Signal: 1 V p-p/fps
Output Frequency: 6 Hz/fps nominal
Flow Rate Range: 1 to 20 fps
Source Impedance: 8 kΩ
Maximum Pressure:
   FP-5300 Series: 180 psig max @ 20°C (68°F)
   FP-5100 Series: 200 psig max @ 20°C (68°F)
Minimum Temperature: 0°C (32°F)
Maximum Temperature: See chart on spec sheet for complete temperature and pressure rating
Pressure Drop: Equal to 2.5 m (8') of straight pipe
Material:
   Transducer Housing: glass-filled polypropylene or PVDF
   O-Rings: FKM
   Shaft: Titanium or Hastelloy C(PVDF optional)
   Rotor: PVDF
Maximum % Solids: 1% of fluid volume, non-abrasive, nonmagnetic, <100 micron diameter and length
Standard Cable Length: 7.5 m (25')
Max Viscosity: 1 centipoise (water); up to 5 cp above 5 fps velocity

注文する（部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)

他のお客様はこのような商品も購入しています。: このアイコンをクリックすると、このモデルを購入した他のお客様の購入商品リストが表示されます.

部品番号/Desc.

注文数

商品説明

Paddlewheel Flow Sensors (Fitting Required)

FP-5300

¥87,302 (税込)
(税抜価格 ¥79,365)

納期: 2 週間

Titanium shaft polypropylene housing, for pipe sizes 1/2 to 4"

FP-5301

¥89,909 (税込)
(税抜価格 ¥81,735)

納期: 2 週間

Titanium shaft polypropylene housing, for pipe sizes 5 to 8"

FP-5302

¥97,724 (税込)
(税抜価格 ¥88,840)

納期: 8 週間

Titanium shaft polypropylene housing, for pipe sizes 10 or larger

FP-5100

¥150,062 (税込)
(税抜価格 ¥136,420)

納期: 2 週間

Hastelloy C shaft, PVDF housing, for pipe sizes 1/2 to 4"

FP-5101

¥163,581 (税込)
(税抜価格 ¥148,710)

納期: 8 週間

Hastelloy C shaft, PVDF housing, for pipe sizes 5 to 8"

Popular Fittings

FP-5307CU

¥93,011 (税込)
(税抜価格 ¥84,555)

納期: 10 週間

3/4" Copper

FP-5310M

¥51,524 (税込)
(税抜価格 ¥46,840)

納期: 2 週間

1" molded PVC

FP-5320GI

¥39,705 (税込)
(税抜価格 ¥36,095)

納期: 10 週間

2" Galvanized Iron

FP-5340CS

¥45,535 (税込)
(税抜価格 ¥41,395)

納期: 10 週間

4" Carbon Steel Weldolet

Popular Panel Meters

DPF701

お問い合せ下さい

納期:

1/8 DIN Panel Meter for Rate or Totalization

DPF75

¥83,144 (税込)
(税抜価格 ¥75,585)

納期: 2 週間

1/8 DIN Panel Meter for Rate and Totalization

Accessories

FPM-5000-SCAK

¥16,341 (税込)
(税抜価格 ¥14,855)

納期: 8 週間

Sensor Conduit Adapter Kit

FMK-1546-1

¥12,716 (税込)
(税抜価格 ¥11,560)

納期: 8 週間

Replacement titanium rotor pin

FMK-51545-1

¥30,982 (税込)
(税抜価格 ¥28,165)

納期: 8 週間

Replacement PVDF rotor and rotor pin

注: Comes complete with operator's manual.

(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)

Ordering Example: (1) FP-5300 Paddlewheel sensor for 1/2 to 4, ¥79,365

製品マニュアル:

ダウンロード FP-5100,FP-5300,FP-5600,FP-8500 - Paddlewheel Flow Sensors