フリーダイヤル 0120-769-103
Emailjpesales@dwyeromega.com

Bronze Body Rubber Impeller Pumps - Discontinued

FPUR600 Series Discontinued

 | FPUR600 Series Discontinued

スクロールダウンし、全ラインアップをご覧ください

1 year warranty
  • Sewage Macerator Available
  • For Use With Liquids Below 50 SS
  • Viscosity
  • Can Easily Tolerate Small ( 1 /4 " Max.) Entrained Solids
  • ODP and TEFC Electric or Gasoline Motor Models Available
  • Models FPUR604-606 Have Zero-Leakage Lip Seals; Models FPUR609 and 611 Have Leak-Proof Mechanical Seals

商品説明

The FPUR600 Series has been discontinued. Please contact our Flow and Environmental department for possible substitutes.

FPUR600 Series rubber impeller pumps output a relatively constant flowrate regardless of outlet pressure. They are intended for use with liquids of less then 50 SSU viscosity and can easily tolerate small (1/4" max) entrained solids. The FPUR606 and FPUR611 include a macerator to chop up easily shredded contaminants such as leaves, seaweed, etc.

Choose pumps with open drip-proof (ODP) totally enclosed fan-cooled (TEFC) or gasoline motors. All motors are rated for continuous duty. AC units operate with 60 Hz, single-phase power, and all (up to 3/4 HP) come with a 6-ft, three-wire cord and plug for 115 Vac (the 1 HP motor should be hard-wired due to amperage draw at 115 volts). For 115/230 Vac units, the customer must rewire the power cord and a suitable plug for 230 Vac. The 230/460 Vac units must be hard-wired by the customer.

The FPUR600 series pumps must be primed to prevent dry running of the impeller. Suction lifts up to 15 feet are possible with pump fully primed. FPUR604 through 606 have lip seals; FPUR609 and 611 have mechanical seals and also include a vacuum switch to insure that the pump won’t run dry if liquid isn’t being pulled through the pump.

The FPUR604 through FPUR606 include male threads to accept 3/4" standard garden hose, and also have female NPT ports. The connections for the FPUR609 also accepts 11/2" I.D. hose; connections for the FPUR611 also accepts 2" I.D. hose.

Model No Flow Rate
(GPM Water)
at 2 psi
Motor
Type
Volts HP RPM Port Size
NPT(F)
Shp
Wt
(kg) lb
Overall
Dim.
H x W x L (in)
In Out
FPUR6046.5ODP1151/617253/8"5.5 (12)8 x 6 x 9
FPUR60512.5ODP1151/334503/8"6.8 (15)8 x 6 x 11
FPUR606†12.5TEFC1151/334501 1/2" M3/8" F7.7 (17)8 x 7 x 13
FPUR609*25ODP115/2303/417251"10.5 (23)9 x 7 x 15
FPUR611*†21ODP115/230117251 1/2"1"17.7 (39)9 x 7 x 18

*Models FPUR609 and FPUR611 include a vacuum switch to insure that the pump won’t run dry if liquid isn’t being pulled through the pump.
†Models FPUR606 and FPUR611 include a macerator to chop up easily shredded contaminants.
注文する (部品番号ビルダーより掲載以外の製品もご選択いただけます)(注文数を入力の上、"カートに追加"をクリックしてください)
部品番号/Desc.
注文数
商品説明
FPUR604
お問い合せ下さい   
納期: 
 
 
Pump with ODP 115 V motor
FPUR609
お問い合せ下さい   
納期: 
 
 
Pump with ODP 115/230 dual voltage motor
FPUR611
お問い合せ下さい   
納期: 
 
 
Pump with ODP 115/230 dual voltage motor
注: *Pump no longer available.
Service kits Include impeller, seal, and gaskets
We noticed you are from the US. Visit your local site for regional offers and live support.