スクロールダウンし、全ラインアップをご覧ください
商品説明
OMEGA offers the FVL-400 Series control valves for low flow OEM, laboratory instrumentation, or bench top flow control purposes. The valve designs and material make them suitable for use with a variety of gases and fluids. Complete valves are available in straight through or 90° degree angle body configurations and are constructed of brass or stainless steel. All valves are supplied with 1/8 FNPT inlet and outlet ports. The standard control valve is available in three different needle tapers, which cover our entire flow range. These units have a rising stem and provide ten turns from closed to full open. The non-rising stem precision control valve is available in six different needle tapers, for fine control of very low flows. This valve offers sixteen turns from closed to full open. Its design eliminates saw-toothing and is virtually hysteresis free. All materials are matched for similar coefficients of expansion.| Body Material | Valve Stem | Seals | Orifice | Max Temp | Max Pressure |
|---|---|---|---|---|---|
| Nickel Plated Brass | 316 SS | Nitrile | 316 SS | 54°C 130°F |
17.2 bar 250 psig |
| 316 SS | 316 SS | Fluorocarbon | Fel-F | 121°C 250°F |
17.2 bar 250 psig |
