The FVL5000 Series has been discontinued. Please contact our Flow
and Environmental department for possible substitutes.
OMEGA offers a wide selection of plastic valves suitable for liquid service
(not for use in compressed air service).
True Union Cartridge Design Ball Valves
Cartridge design allows valve body to be easily removed from the line for simple maintenance. The valve
can be turned off and then disconnected on the downstream side while the upstream side is still
pressurized. PVC and CPVC have seats of PTFE backed with EPDM, and EPDM O-rings. Polypro and PVDF
have seats of PTFE backed with FKM, and FKM O-rings.
Model No. PVC
Model No. CPVC
Model No. Polypro
Model No. PVDF
Pipe Size
Cv
FVL5305
FVL5305-C
FVL5105-PO
FVL5105
1/2"
11.9
FVL5307
FVL5307-C
FVL5107-PO
FVL5107
3/4"
24.5
FVL5310
FVL5310-C
FVL5110-PO
FVL5110
1"
46.8
FVL5312
FVL5312-C
FVL5112-PO
FVL5112
11/4"
70
FVL5315
FVL5315-C
FVL5115-PO
FVL5115
11/2"
112
FVL5320
FVL5320-C
FVL5120-PO
FVL5120
2"
185
FVL5325
FVL5325-C
FVL5125-PO
FVL5125
21/2"
320
FVL5330
FVL5330-C
FVL5130-PO
FVL5130
3"
430
FVL5340
FVL5340-C
FVL5140-PO
FVL5140
4"
720
Low-Cost On/Off Actuated Ball Valve
Unidirectional one-quarter-turn motor uses up to 2.2 amps of 115 Vac single phase power, 25% duty cycle, 5 second cycle tie. Motor housing
(5" H x 3 1/4" L x 3" W with 1/2" FNPT electrical port) is high impact ABS plastic with NEMA-4 rating. Valves and actuators are integrally mounted and
cannot be separated for replacement or repair. In clean water service, the valves are rated for 250,000 On/Off cycles. Ball seat is PTFE backed with
EPDM; seals are EPDM. An optional limit switch permits feedback of valve
position to confirm proper open/close valve position.
Model No. PVC Socket
Model No. CPVC Socket
Pipe Size
Cv
Weight kg (lb)
Dimension H mm (in)
FVL5803
FVL5803-C
3/8"
10
0.8 (1.75)
140 (5.50)
FVL5805
FVL5805-C
1/2"
12
0.8 (1.75)
140 (5.50)
FVL5807
FVL5807-C
3/4"
30
0.9 (2)
150 (5.90)
FVL5810
FVL5810-C
1"
47
1.1 (2.5)
159 (6.25)
FVL5812
FVL5812-C
1 1/4"
80
1.4 (3)
165 (6.50)
FVL5815
FVL5815-C
1 1/2"
140
1.4 (3)
165 (6.50)
FVL5820
FVL5820-C
2"
185
1.8 (4)
178 (7.00)
True Union Ball Check Valves
Restricts flow to one direction only. Commonly used on the inlet side of non-self-priming
pumps (such as centrifugal and diaphragm metering pumps) to keep liquid in the
pump drive section. These check valves are not spring assisted; they operate by
gravity only and must be vertically mounted. PVC and CPVC versions have seats
and seals of EPDM.
Model No. PVC
Model No. CPVC
Pipe Size
FVL5405-CK
FVL5405-CKC
1/2"
FVL5407-CK
FVL5407-CKC
3/4"
FVL5410-CK
FVL5410-CKC
1"
FVL5415-CK
FVL5415-CKC
1 1/2"
FVL5420-CK
FVL5420-CKC
2"
Diaphragm Valve
Diaphragm valves feature an abrasion-resistant and non-clog The valve closes bubble-tight, and has a top-entry
design for simple in-line maintenance. Suitable for On/Off and throttling applications. position indicator is
included as standard. PVC valve body available with choice of EPDM or PTFE diaphragm.
Model No. PVC/EPDM Diaphragm Socket
Cv
Model No. PVC/PTFE Diaphragm Socket
Cv
Pipe Size
FVL7805
8
FVL7805-T
8
1/2"
FVL7807
11.1
FVL7807-T
11.1
3/4"
FVL7810
17.5
FVL7810-T
17.5
1"
FVL7815
31
FVL7815-T
31
1 1/2"
FVL7820
75.4
FVL7820-T
75.4
2"
Three-Way Ball Valves
Both outlets have union connections; inlet has no union connection. All ports are socket ends. PVC and CPVC have
seats of PTFE backed with EPDM and EPDM O-rings.
Model No. PVC
Model No. CPVC
Cv
Pipe Size
FVL5305-3
FVL5305-3C
5.3
1/2"
FVL5307-3
FVL5307-3C
10
3/4"
FVL5310-3
FVL5310-3C
18.2
1"
FVL5315-3
FVL5315-3C
30.5
1 1/2"
FVL5320-3
FVL5320-3C
46.6
2"
FVL5330-3
FVL5330-3C
90.5
3"
Low-Cost Ball Valves
CPVC body with socket connection. CPVC valves have seats of PTFE backed with EPDM, and EPDM O-rings.
CPVC ball and water compatible O-ring stem seal.
Model No. CPVC
Cv
Pipe Size
FVL5305-CLC
12.95
1/2"
FVL5307-CLC
24.5
3/4"
FVL5310-CLC
47
1"
FVL5312-CLC
70
11/4"
FVL5315-CLC
112
11/2"
FVL5320-CLC
185
2"
Caution:
These plastic valves are manufactured to the highest quality
specifications. However, due to their economical construction, they
should be used only for applications where, in the event of product
failure, risk of damage to equipment or personnel is minimal. User
should periodically inspect the product’s performance in the actual
application. Use of the products beyond the recommended capabilities
and lifespan is specifically not recommended.
注: Comes with complete operator's manual.
We noticed you are from the US. Visit your local site for regional offers and live support.
