PTFE Needle Valves

FVLT100 Series

PTFE Needle Valves

^¥16,415 FVLT101

注文する

Fluids Contact PTFE Only
Structurally Rigid Metal Shell
One PTFE O-Ring

電磁弁 (バルブ) - 関連する商品を探す
（見つからない場合はカスタマーサービスにご連絡ください）

商品説明

The FVLT100 Series compact and reliable PTFE needle valves are designed for laboratory and industrial applications for regulating corrosive gases and liquids or for high purity service. They may also be used as shut off valves.

Structurally rigid metallic shells reinforce the PTFE bodies of the valves. Fluids contact only PTFE and CTFE materials. Shells are made of anodized aluminum or type 316 stainless steel and bushings are made of plated brass or 316 stainless steel. Where externally corrosive conditions exist stainless steel is recommended. Valve spindles are made of rigid CTFE to minimize the undesirable material “creeping” normally associated with PTFE.

The FVLT100 Series PTFE valves are designed for relatively high flow ranges while still performing well in low flow rates. Valves may be used in pressure or non-critical vacuum service. The simplicity of design - there are only seven components (including a single PTFE o-ring) - assures reliability and minimizes sources of leakage. It takes seconds to disassemble the valve for cleaning and maintenance. The PTFE o-ring is radially compressed and due to this unique design feature the degree of compression may be adjusted without disassembly by tightening the hexagonal bushing.

The FVLT110 Series Metering valves are constructed of PTFE and PCTFE materials. Non-fluid contacting external parts are made of anodized aluminum.

Valves are offered in three conveniently overlapping flow ranges. Safety handle prevents over tightening and facilitates fine-metered regulation. FVLT110 Series valves are useful in regulating the flow of corrosive gases and liquids. They may be used in pressure or non-critical vacuum service and serve as bubble tight shutoff valves.

Model No.	Maximum Flow mL/min		Cv	Connections	Non Wetted Materials
Model No.	Air	Water	Cv	Connections	Non Wetted Materials
FVLT101	2400	130	0.011	1/8" FNPT	Aluminum/Brass
FVLT102	55,000	2800	0.25	1/8" FNPT	Aluminum/Brass
FVLT103	2400	130	0.011	1/4" Comp.	Aluminum/Brass
FVLT104	55,000	2800	0.25	1/4" Comp.	Aluminum/Brass
FVLT101-SS	2400	130	0.011	1/8" FNPT	316 Stainless Steel
FVLT102-SS	55,000	2800	0.25	1/8" FNPT	316 Stainless Steel
FVLT103-SS	2400	130	0.011	1/4" Comp.	316 Stainless Steel
FVLT104-SS	55,000	2800	0.25	1/4" Comp.	316 Stainless Steel
FVLT111	600	36	0.003	1/8" FNPT	Anodized Aluminum
FVLT112	3000	180	0.015	1/8" FNPT	Anodized Aluminum
FVLT113	30,000	1800	0.15	1/8" FNPT	Anodized Aluminum
FVLT114	600	36	0.003	1/4" Comp.	Anodized Aluminum
FVLT115	3000	180	0.015	1/4" Comp.	Anodized Aluminum
FVLT116	30,000	1800	0.15	1/4" Comp.	Anodized Aluminum

SPECIFICATIONS
Maximum Pressure: 75 psig (517 kPa)
Maximum Temperature: 65°C (150°F)
Orifice Size: 3.175 mm dia. (0.125")
Materials of Construction
Fluid Contacting:
   Body and O-ring: PTFE
   Valve spindle: CTFE
Non Fluid Contacting:
   FVLT100: Shell - Aluminum (anodized) or 316 stainless steel
   Bushing: plated brass, or 316 stainless steel
   Adjusting Knob: phenolic
   FVLT110: Shell + Handle - Aluminum (anodized)
Number of Turns to Fully Open:
   FVLT100: 6
   FVLT110: 8

注文する（部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)

部品番号/Desc.

注文数

商品説明

FVLT101

¥18,057 (税込)
(税抜価格 ¥16,415)

納期: 6 週間

1/8" FNPT Aluminum/Brass

FVLT102

¥18,057 (税込)
(税抜価格 ¥16,415)

納期: 2 週間

1/8" FNPT Aluminum/Brass

FVLT103

¥60,110 (税込)
(税抜価格 ¥54,645)

納期: 6 週間

1/4" Comp. Aluminum/Brass

FVLT104

¥60,110 (税込)
(税抜価格 ¥54,645)

納期: 6 週間

1/4" Comp. Aluminum/Brass

FVLT101-SS

¥35,959 (税込)
(税抜価格 ¥32,690)

納期: 6 週間

1/8" FNPT 316 Stainless Steel

FVLT102-SS

¥35,959 (税込)
(税抜価格 ¥32,690)

納期: 2 週間

1/8" FNPT 316 Stainless Steel

FVLT103-SS

¥80,641 (税込)
(税抜価格 ¥73,310)

納期: 6 週間

1/4" Comp. 316 Stainless Steel

FVLT104-SS

¥80,641 (税込)
(税抜価格 ¥73,310)

納期: 6 週間

1/4" Comp. 316 Stainless Steel

FVLT111

¥29,997 (税込)
(税抜価格 ¥27,270)

納期: 2 週間

1/8" FNPT Anodized Aluminum

FVLT112

¥29,997 (税込)
(税抜価格 ¥27,270)

納期: 6 週間

1/8" FNPT Anodized Aluminum

FVLT113

¥29,997 (税込)
(税抜価格 ¥27,270)

納期: 2 週間

1/8" FNPT Anodized Aluminum

FVLT114

¥60,269 (税込)
(税抜価格 ¥54,790)

納期: 6 週間

1/4" Comp. Anodized Aluminum

FVLT115

¥60,269 (税込)
(税抜価格 ¥54,790)

納期: 6 週間

1/4" Comp. Anodized Aluminum

FVLT116

¥60,269 (税込)
(税抜価格 ¥54,790)

納期: 6 週間

1/4" Comp. Anodized Aluminum

注: **Flow rates are based on 10 psig (69 kPa) inlet pressure and atmospheric exhaust.
Ordering Example: (1) FVLT101 1/8 FNPT Aluminum/Brass, ¥16,415