The HFD-1 series has been discontinued. Please contact our Flow Engineering department.
Of all the various uses for ultrasonics, flaw detection is the oldest and the most common. Prior to 1950, the laws of physics that govern the propagation of sound waves through solid materials have been used to detect hidden cracks, voids, porosity, and other internal discontinuities in metals, composites, plastics, and ceramics. High frequency sound waves reflect from flaws in predictable ways, producing distinctive echo patterns that can be displayed and recorded by portable instruments. Ultrasonic testing is completely nondestructive and safe, and it is a well-established test method in many basic manufacturing, process, and service industries, especially in applications involving welds and structural metals.
Ultrasonic flaw detection is basically a comparative technique. Using appropriate reference standards along with a knowledge of sound wave propagation and generally accepted test procedures, a trained operator identifies specific echo patterns corresponding to the echo response from good parts and from representative flaws. The echo pattern from a test piece may then be compared to the patterns from these calibration standards to determine its condition.
The HFD-1 is a digital ultrasonic flaw
(inclusion) detector with 800 x 480 WVGA
display for superior visibility in all lighting
conditions, including direct sunlight.
Using the advanced tunable squarewave
excitation technology, the HFD-1 provides
excellent material penetration and a high
signal to noise ratio when detecting special
composite materials, highly attenuated or
thick work pieces.
The zoom function for the in-gate waveform
allows users to observe the waveform detail
conveniently with an optimized height to
width rate to insure a higher resolution.
The HFD-1 has different color change of
the waveform for visual and an optional
alarm function.
The auto calibration includes fast
calibrating material velocity, probes
time delay and angle of signal.
The USB port allows access for
updating the software, downloading
and printing of the data.
Specifications Accuracy: ≤ 3% vertical linearity Operating Frequency: Broadband 0.5 to 20 MHz, optional narrowband 1.5 to 3 MHz Pulse Width: 50 to 800 ns with 5 ns increments Resolution: ≥ 36 dB Suppression: 0 to 90% Enclosure: NEMA 3 (IP54) Temperature Range: -30 to 50°C (-22 to 122°F) Humidity: 20 to 90% RH Communications: USB port Power: Lithium battery (included) Weight: 0.9 kg (2 lbs) Dimensions: 215 L x 126 W x 53 mm H (8.5 x 5 x 2")
注: Comes complete with carrying case, operator’s manual, handheld unit with two transducers (standard and angle probes), power adaptor and lithium battery.
We noticed you are from the US. Visit your local site for regional offers and live support.
