High Temperature Constant Wattage Heating Cable

KE Series

^¥1,815 KE4-120

注文する

Continuous Exposure Rating up to 500°F
Low Watt Density
Parallel Resistance Heater
Cut-to-Length at the Job Site
Constant Watt Density
All Common Voltages Available
Moisture and Chemical Resistance
Continuous Electrical Ground
Designed for freeze protection and process temperature maintenance.

ケーブルヒータ - 関連する商品を探す
（見つからない場合はカスタマーサービスにご連絡ください）

商品説明

The KE Cable heating element is tension wrapped and covered with two layers of nonflammable Polyimide Film applied in reverse directions, then heat fused for moisture protection. A stainless steel and tinned copper sheath is then added for additional protection and electrical ground return path. The sheath is enclosed in a minimum 20 mil PFA abrasion and chemical resistant extruded jacket.

KE Cable is a low Watt density electrical resistance heater. It is designed for freeze protection, viscosity and high temperature process control in Class 1, Groups B, C, and D, Division 2 Classified Areas as well as in corrosive environments. KE is used in asphalt plants, oil refineries, mines, chemical and petrochemical processing areas, other locations where corrosive atmospheres can occur. KE is equally suitable for applications in severe arctic cold.

CAUTION AND WARNING!
Fire and electrical shock may result if products are used improperly or installed or used by non-qualified personnel. See inside back cover for additional warnings.

Max. Circuit Length**-KE Series

Power	120V	208V	240V	277V	480V
4 Watts/ft	349'	606'	699'	806'	1398'
8 Watts/ft	247'	428'	494'	570'	988'
12 Watts/ft	202'	350'	403'	466'	807'

注文する（部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)

部品番号/Desc.

注文数

商品説明

Prices below are per foot

4 WATTS/FT

KE4-120

¥1,997 (税込)
(税抜価格 ¥1,815)

納期: 11 週間

high temperature, constant wattage cable, 4 W/FT, 120 V

KE4-240

¥4,136 (税込)
(税抜価格 ¥3,760)

納期: 2 週間

high temperature, constant wattage cable, 4 W/FT, 240 V

8 WATTS/FT

KE8-240

¥4,136 (税込)
(税抜価格 ¥3,760)

納期: 11 週間

high temperature, constant wattage cable, 8 W/FT, 240 V

12 WATTS/FT

KE12-120

¥2,035 (税込)
(税抜価格 ¥1,850)

納期: 12 週間

high temperature, constant wattage cable, 12 W/FT, 120 V

KE12-240

¥4,136 (税込)
(税抜価格 ¥3,760)

納期: 12 週間

high temperature, constant wattage cable, 12 W/FT, 240 V

Accessories

KE-UC-KIT

¥13,002 (税込)
(税抜価格 ¥11,820)

納期: 2 週間

Termination Kit (for KE Series)

KE-KC-KIT

¥13,002 (税込)
(税抜価格 ¥11,820)

納期: 11 週間

Termination Kit (for KE Series)

FE-UC-KIT

¥12,694 (税込)
(税抜価格 ¥11,540)

納期: 12 週間

Termination Kit (for FE Series)

FE-KC-KIT

¥13,629 (税込)
(税抜価格 ¥12,390)

納期: 12 週間

Termination Kit (for FE Series)

SK-KIT

¥6,281 (税込)
(税抜価格 ¥5,710)

納期: 11 週間

Splice Kit

FE-SK-KIT

¥9,240 (税込)
(税抜価格 ¥8,400)

納期: 12 週間

Splice Kit (for FE Series)

RTV-SS

¥2,695 (税込)
(税抜価格 ¥2,450)

納期: 11 週間

Silicone Sealant

クイックオーダー

部品番号

注文数

部品番号

注文数

注:
*Price per foot. When ordering specify desired length in feet. 25 foot minimum.
**Maximum Circuit Lengths include end-to-end voltage variation of 10%. Longer runs may be used. Lengths are based on cable operating temperatures of 300°F. To complete your system the following accessories are recommended: (1) Termination kits for KE cable, (2) control options - we offer complete selection of controllers and thermostats.