Versatile, for Liquids or Solids with a Dielectric Greater than 8
Maintenance-Free Convenience
Rugged Potted Electronics Construction Defies Vibration
NEMA-4 Housing
No Moving Parts
Adjustable Time Delay
Hi or Lo Failsafe
Low Cost
Tip Sensitive
商品説明
The LV750 series has been discontinued. Please see the LVCN6000/7000 Series as a possible alternative or contact our Flow Engineering department.
The rugged construction and low
cost of the LV750 Series level
switch makes it a practical choice in
a wide variety of applications for
both liquids and solids, which may
be electrically conductive or
nonconductive. As a radio
frequency switch, it can tolerate
reasonable amounts of sticky
build-up and still function flawlessly.
For conductive liquids and materials
with a high dielectric constant
(greater than 30) that additionally
have a tendency to "bridge"
between the probe and container
wall, a PTFE coated probe should
be used. For chemical compatibility
considerations, also request the
¾" nipple.
SPECIFICATIONS Power: 95 to 130 Vac, (std) or 190 to 260 Vac (opt) 50 to 60 Hz, 2 W, or 9 to 35 Vdc @ 100 mA (optional) Relay: DPDT (2 form "C") dry contacts rated for 5 A Resistive @ 120 Vac or 28 Vdc Operating Temperature/Pressure Electronics: -40 to 85°C (-40 to 185°F) Probes: 305 mm (12") min length (standard) to 3.0 m (120") (special) Uncoated, Acetal Bushing: -40 to 85°C (-40 to 185°F), 103 bar (1500 psig) @ 25°C (77°F), 0 psig @ 85°C (185°F) Uncoated Bushing: -40 to 232°C (-40 to 450°F), 103 bar (1500 psig) @ 25°C (77°F), 0 psig @ 232°C (450°F) PTFE-Coated (with 316 SS nipple): -40 to 232°C (-40 to 450°F), 103 bar (1500 psig) @ 25°C (77°F), 0 psig @ 232°C (450°F) PTFE-Coated (with ¾" nipple): -40 to 85°C (-40 to 185°F), 6.9 bar (100 psig) @ 25°C (77°F), 0 psig @ 232°C (450°F) Minimum Dielectric: 10.0 for standard probe Wetted Parts: 316 SS rod, 316 SS nipple, Acetal (or PTFE) Enclosure: Cast aluminum, PVC optional Time Delay: 0, 5, 10, 15 sec, selectable Size: 419 x 155 x 46 mm (16.5 x 6.1 x 1.8") Weight: 0.91 kg (2 lb)
注: Comes complete with operator's manual.
For 240VAC power option, add suffix "-240V" to the model number, no additional cost.
For additional probe lengths over 12 inches, add suffix "-(length in inches)" to model number, add $18 per foot on the LV751 and LV752. Add $34 per foot on the LV753A and LV754.
(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)
We noticed you are from the US. Visit your local site for regional offers and live support.
