The LVU40 series ultrasonic
transmitters are advanced
ultrasonic level measurement
sensors for liquids. These products
continue to meet demanding
applications.
The microprocessor-based
circuits provide a temperaturecompensated
signal for improved
accuracy. All models have the
ability to filter false echoes
produced by peripheral
obstructions.
Continuous level measurement can
be provided in a range of 0.3 to
18.3 m (1.0 to 60') with several
power and programmability options.
Point level can also be obtained
using a PLC (Industrial
Programmable Controller) or
one of OMEGA’s CNI process controllers.
SPECIFICATIONS Accuracy: ±0.25% of max range (in air) Range: 0.3 to 18.3 m (1 to 60') Resolution: 6.9 mm (0.270") Frequency: 45 kHz Dead Zone Range: 0.3 m (1') Operating Temperature Range: -40 to 60°C (-40 to 140°F) Pressure: 1 bar (15 psig max) Mounting: 3 NPT Beam Angle: 6 to 12° at -3 dB (model dependent) Loss of Echo Hold: 30 seconds, 22 mA output Power Options: AC: 115 Vac, 60 Hz or 230 Vac, 50 Hz (±20%) 1.7 VA DC: 12 to 30 Vdc @ 0.07 A, @ 24 Vdc R load = (Vs – 6)/24 mA Output: 4 to 20 mA or 20 to 4 mA, 6.1 µA resolution; 750 Ω (isolated on 4-wire models only) Optional: RS232 or RS485 communications port Fuse: 0.125 A/250 V type Temperature Compensation: Onboard the sensor Calibration: Pushbutton or optional programmable Diagnostics (Echo Profile): Via optional programmable port Approval: Entela, CE Conduit Entry: ½ NPT hole (PVC only) Enclosure: Aluminum with PVC antenna ingress protection [NEMA 4X (IP66)] Housing Dimensions: 101.6 x 226.1 m (4 x 8.9") Sensor Diameter: 76.2 mm (3")
注: Comes complete with software and operator’s manual. Ordering Example: (1) CNI3233 1/32 DIN controller with relays, ¥51,320
