Metric Multiconductor Feedthroughs

MFT Metric Series

スクロールダウンし、全ラインアップをご覧ください

注文する

Pressure or Vacuum Applications
Seals Multiple Thermocouples and Protection Tubes
Available in Both NPT and ISO T/BPST Mounting Threads
Up to 16 Probes in 1 Fitting
Blank Sealing Plugs Included
3 to 16 Probes
416 SS Body and Cap
316 SS Ferrules Standard
PTFE Ferrules Available
OMEGALOKR Ferrules Standard
1 to 6 mm (0.040 to 1.4") Probe Diameters

コネクタ - 関連する商品を探す
（見つからない場合はカスタマーサービスにご連絡ください）

商品説明

These all-new multiconductor feedthroughs are designed for applications that require several sensors to pass through a wall or bulkhead at one opening or within a small area. Heavy-duty 416 SS construction allows use of this fitting in high-pressure or vacuum applications. Probes between 0.040" and 1/4" in diameter can be used in these feedthroughs. The maximum number of probes per feedthrough is 3 for 1/4" diameter probes, 5 for 3/16" diameter, 8 for 1/8" diameter, 16 for 1/16" diameter, and 16 for 0.040" diameter probes.

All multiconductor feedthroughs come standard with stainless steel ferrules. A stainless steel ferrule deforms and becomes permanent. If the probes have to be installed several times at different depths in the feedthrough, PTFE ferrules should be used. PTFE ferrules will not deform the probe sheath, which allows the same probe to be reused. The ferrules used in the feedthroughs are identical to the ferrules used in standard OMEGALOK compression fittings.

注文する（部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)

部品番号/Desc.

注文数

商品説明

Thread is ISO/BPST

MFT-M10-3

¥42,302 (税込)
(税抜価格 ¥38,456)

納期: 5 週間

1.0mm probe, 3 probes, 1/4in. Thread

MFT-M10-5

¥49,909 (税込)
(税抜価格 ¥45,372)

納期: 5 週間

1.0mm probe, 5 probes, 1/4in. Thread

MFT-M10-6

¥53,711 (税込)
(税抜価格 ¥48,828)

納期: 5 週間

1.0mm probe, 6 probes, 1/4in. Thread

MFT-M15-3

¥37,551 (税込)
(税抜価格 ¥34,137)

納期: 5 週間

1.5mm probe, 3 probes, 1/4in. Thread

MFT-M30-3

¥34,700 (税込)
(税抜価格 ¥31,545)

納期: 5 週間

3.0mm probe, 3 probes, 1/4in. Thread

クイックオーダー

部品番号

注文数

部品番号

注文数

注: All fittings are supplied with stainless steel ferrules. If PTFE ferrules are required, add suffix "-PTFE" to the model number shown in the Order By Part Number fields. Add additional cost per ferrule. One ferrule needed for each conductor.
Ordering Example: (1) MFT-M10-6 1.0mm probe, 6 probes, 1/4in. ISO/BPST Thread, ¥48,828

部品番号ビルダー

下記から仕様構成を選択し、ご注文ください

	(1)	(2)
MFT

以下からオプションを選択:

(1) Diameter of Probe :
-M10 : 1.0mm
-M15 : 1.5mm
-M30 : 3.0mm
-M45 : 4.5mm
-M60 : 6.0mm

(2) Number of Probes :
-3 : 3 probes
-5 : 5 probes
-6 : 6 probes
-8 : 8 probes
-10 : 10 probes
-12 : 12 probes
-16 : 16 probes

注: 有効な部品番号については、「商品仕様(PDF)」を参照ください。
ご不明な場合は、カスタマーサービス(0120-040-572 もしくは jpesales@dwyeromega.com)へお問合せください。