お問合せ
カート  |  お問い合わせ  | 
0120-769-103  | 
フリーダイヤル 0120-769-103
Emailjpesales@dwyeromega.com

High Watt Density Band Heaters

MPP

High Watt Density Band Heaters | MPP

High Watt Density Band Heaters

スクロールダウンし、全ラインアップをご覧ください

注文する
  • High Watt Density
  • Temperatures up to 760°C (1400°F)
バンドヒータ - 関連する商品を探す
（見つからない場合はカスタマーサービスにご連絡ください）

商品説明

The Mi-Plus is the solution for applications that require high watt densities (Watt/in2) and/or high operating temperatures. Mi-Plus band heaters are capable of temperatures up to 760°C (1400°F) and watt densities up to 23.25 Watt/cm2 (150 Watt/in2). The recommended maximum watt density for a specific application will depend on the heater size and its operating temperature. Specially formulated mineral insulated tape providing excellent thermal conductivity and dielectric strength is used to insulate the nickel chrome resistance wire from the stainless steel sheath. The heater assembly is formed under pressure to a precise diameter with a thin low-mass cross section, assuring fast heat-up rates and reduced cycle times.

Specifications and Tolerances
If non-standard widths or tighter tolerances are required, contact OMEGA.
Performance Ratings
Maximum Temperature: 760°C (1400°F)
Nominal Watt Density:
    Nozzle Bands, Under 3" Diameter: 4.7 to 15.5 Watt/cm² (30 to 100 Watt/in²)
    Barrel Bands, 3" and Greater in Diameter: 3.1 to 10.9 Watt/cm² (20 to 70 Watt/in²)
Maximum Watt Density: 23 Watt/cm² (150 Watt/in²) dependent on heater size, operating temperature and termination
Electrical Ratings
Maximum Voltage: 480 Vac per termination
Dual Voltage: Available depending on heater configuration
Maximum Amperage:
    Lead Wire Termination: 10A
    Screw Terminations: 8-32UNF—20A, 10-32UNF—25A
Resistance Tolerance: +10%, -5%
Wattage Tolerance: +5%, -10%
Physical Size Construction Limitations
Nominal Gap—Built-In Bracket:
    Less than 44 mm (13/4") Diameter: 6 mm (1/4")
    44 to 51 mm (13/4 to 2") Diameter: 8 mm (5/16")
    51 to 127 mm (2 to 5") Diameter: 10 mm (3/8")
    127 mm to 0.46 m (5 to 18") Diameter: 13 mm (1/2")
Greater than 0.46 m (18") Diameter: 19 mm (3/4")
If a larger gap is required for probes or thermocouples, specify when ordering.
Maximum Inside Diameters:
    One-Piece: 355.6 mm (14")*
    Expandable: 355.6 mm (14")*
    Two-Piece: 635.0 mm (25")
    Over 635.0 mm (25") will require multiple segments. Contact OMEGA.
* Note: OMEGA recommends two-piece construction for heaters 10" ID and greater.
Standard Widths: 25.4 to 203.2 mm (1 to 8")
Width Tolerance: 2.4 mm (±3/32")

Model No. Inner Dimension Width Watt Watt Density Clamping/ Construction
120V 240V mm inch mm inch Watt/cm2 Watt/in2
MPP50101 — 25.4 1 25.4 1 150 10.9 70 WB
— MPP50206 25.4 1 25.4 1 225 16.3 105 WB
MPP50301 MPP50401 25.4 1 38.1 11⁄2 200 9.7 62 WB
— MPP50601 25.4 1 38.1 11⁄2 250 12.1 78 WB
MPP50701 MPP50801 25.4 1 38.1 11⁄2 300 14.5 93 WB
MPP51101 MPP51202 31.8 11⁄4 25.4 1 250 13.2 85 WB
— MPP51401 31.8 11⁄4 25.4 1 275 14.6 94 WB
MPP51701 — 31.8 11⁄4 38.1 11⁄2 350 12.4 80 LB
— MPP51801 31.8 11⁄4 38.1 11⁄2 350 12.4 80 WB
MPP51901 MPP52001 38.1 11⁄2 25.4 1 200 8.4 54 OB
MPP52301 MPP52402 38.1 11⁄2 25.4 1 300 12.5 81 OB
MPP52501 MPP52602 38.1 11⁄2 38.1 11⁄2 300 8.4 54 LB
— MPP52903 38.1 11⁄2 38.1 11⁄2 450 12.5 81 LB
— MPP53001 38.1 11⁄2 50.8 2 300 6.3 40 LB
— MPP53202 38.1 11⁄2 50.8 2 450 9.4 61 LB
— MPP53401 38.1 11⁄2 76.2 3 350 4.9 31 LB
— MPP53501 38.1 11⁄2 76.2 3 500 7.0 45 LB
MPP53801 MPP53901 44.5 13⁄4 38.1 11⁄2 300 6.9 44 LB
— MPP54301 44.5 13⁄4 50.8 2 750 12.9 83 LB
— MPP54401 44.5 13⁄4 63.5 21⁄2 550 7.6 49 LB
— MPP54601 44.5 13⁄4 76.2 3 1000 11.5 74 LB
MPP54701 MPP54801 50.8 2 25.4 1 350 10.3 66 OB
— MPP54901 50.8 2 38.1 11⁄2 400 7.8 50 LB
MPP55051 MPP55101 50.8 2 50.8 2 750 11 71 LB
— MPP55401 57.2 21⁄4 25.4 1 350 8.9 58 OB
— MPP55801 57.2 21⁄4 63.5 21⁄2 1000 10.2 66 LB
— MPP56001 63.5 21⁄2 25.4 1 400 9.0 58 OB
— MPP56101 63.5 21⁄2 38.1 11⁄2 500 7.5 49 LB
Ordering Example: MPP55051, nozzle band heater, 120V, 750 watt, 305 mm (12") leads.
Model No. Inner Dimension Width Watt Voltage Watt Density Style Clamping/ Construction Terminal
mm inch mm inch Watt/cm2 Watt/in2
MPP00230 76.2 3 38.1 11⁄2 500 240 6.3 41 1 pc NB T2
MPP00231 76.2 3 38.1 11⁄2 525 240 6.6 43 1 pc NB T2
MPP00232 82.6 31⁄4 63.5 21⁄2 1100 120 7.4 48 1 pc NB T3X
MPP00233 82.6 31⁄4 63.5 21⁄2 1400 240 9.4 61 1 pc NB T3X
MPP00234 88.9 31⁄2 50.8 2 800 240 6.2 40 1 pc NB T3X
MPP00235 92.1 35⁄8 38.1 11⁄2 650 240/480 8 52 Exp NE T2
MPP00236 101.6 4 38.1 11⁄2 625 240/480 6.8 44 Exp NE T2
MPP00237 101.6 4 38.1 11⁄2 725 240/480 7.8 51 Exp NE T2
MPP00238 101.6 4 38.1 11⁄2 800 240 7.3 47 1 pc NB T2
MPP00186 114.3 41⁄2 63.5 21⁄2 1250 240 5.9 38 1 pc NB T3X
MPP00239 127 5 38.1 11⁄2 1000 240/480 8.1 52 Exp NE T2
MPP00240 133.4 51⁄4 38.1 11⁄2 600 240/480 4.6 30 Exp NE T2
MPP00241 133.4 51⁄4 38.1 11⁄2 1000 240/480 7.7 49 Exp NE T2
MPP00187 133.4 51⁄4 76.2 3 1700 240/480 6.1 39 Exp NE T3X
MPP00242 133.4 51⁄4 114.3 41⁄2 2400 240/480 5.7 37 Exp NE T3X
MPP00243 133.4 51⁄4 114.3 41⁄2 2700 240/480 6.4 41 Exp NE T3X
MPP00244 139.7 51⁄2 38.1 11⁄2 1000 240/480 7.2 47 Exp NE T2
MPP00245 139.7 51⁄2 38.1 11⁄2 1300 240/480 9.4 61 Exp NE T2
MPP00246 152.4 6 38.1 11⁄2 1000 240/480 6.5 42 Exp NE T2
MPP00247 152.4 6 38.1 11⁄2 1400 240/480 9.1 59 Exp NE T2
MPP00248 165.1 61⁄2 38.1 11⁄2 1250 240/480 7.4 48 Exp NE T2
MPP00249 171.5 63⁄4 38.1 11⁄2 815 240/480 4.6 30 Exp NE T2
MPP00250 171.5 63⁄4 38.1 11⁄2 1000 240/480 5.7 37 Exp NE T2
MPP00188 171.5 63⁄4 101.6 4 2600 240/480 5.2 34 Exp NE T3X
MPP00251 171.5 63⁄4 127 5 3700 240/480 6 39 Exp NE T3X
MPP00189 171.5 63⁄4 152.4 6 3750 240/480 5 33 Exp NE T3X
MPP00252 177.8 7 38.1 11⁄2 1250 240/480 6.8 44 Exp NE T2
MPP00253 177.8 7 38.1 11⁄2 1500 240/480 8.2 53 Exp NE T2
MPP00254 190.5 71⁄2 38.1 11⁄2 1500 240/480 7.5 49 Exp NE T2
MPP00255 193.7 75⁄8 76.2 3 1800 240/480 4.2 27 Exp NE T3X
MPP00190 193.7 75⁄8 114.3 41⁄2 3150 240/480 4.9 32 Exp NE T3X
MPP00256 203.2 8 38.1 11⁄2 1250 240/480 5.8 38 Exp NE T2
MPP00257 203.2 8 38.1 11⁄2 1600 240/480 7.5 48 Exp NE T2
MPP00258 228.6 9 38.1 11⁄2 1500 240/480 6.1 40 Exp NE T2
MPP00259 228.6 9 38.1 11⁄2 1750 240/480 7.2 46 Exp NE T2
MPP00191 241.3 91⁄2 76.2 3 3000 240/480 5.6 36 Exp NE T3X
MPP00260 285.8 111⁄4 76.2 3 2400 240/480 3.7 24 Exp NE T3X
MPP00261 285.8 111⁄4 127 5 5100 240/480 4.7 31 Exp NE T3X
注文する （部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)
部品番号/Desc.
注文数
商品説明
MPP55051
¥44,875 (税込)
(税抜価格 ¥40,795)
納期: 8 週間
 
120 Volts, 750W, Clamping Construction; LB
MPP50101
¥50,793 (税込)
(税抜価格 ¥46,175)
納期: 8 週間
 
120 volts, 150 watts, Clamping Construction; WB
MPP50401
¥47,295 (税込)
(税抜価格 ¥42,995)
納期: 8 週間
 
240 volts, 200 watts, Clamping Construction; WB
MPP50701
¥50,793 (税込)
(税抜価格 ¥46,175)
納期: 8 週間
 
120 volts, 300 watts, Clamping Construction; WB
MPP51401
¥47,295 (税込)
(税抜価格 ¥42,995)
納期: 8 週間
 
240 volts, 275 watts, Clamping Construction; WB

クイックオーダー

部品番号
注文数
部品番号
注文数


We noticed you are from the US. Visit your local site for regional offers and live support.
Stay here.
Go to the the US site >