The OM-CP-LEVEL1000 has been discontinued. Please see the OM-CP-LEVEL101 as a possible alternative or contact our Data Acquisition Engineering Department.
The OM-CP-LEVEL1000
accurately monitors and records
water level and temperature. Its
rugged, stainless steel design
allows for the device to be placed
in harsh environments, which
makes it well suited for use at
waste water treatment facilities,
monitoring well and ground water
levels, irrigation canals, lake and
wetland studies and other water
level applications. The integrated
vented tube allows the device to
be atmospheric pressure
compensated, providing improved
accuracy and resolution over other,
non-vented water level recorders.
The OM-CP-LEVEL1000 uses a
rugged stainless steel pressure
strain gauge to accurately measure
the water level. Our user-friendly
software will display all pressure
measurements in the user’s choice
of feet, inches, meters, centimeters,
millimeters or PSI. The device uses
an internal temperature sensor to
provide accurate temperature
measurements eliminating the
need for a separate temperature
recorder. The logger can be started
to take measurements every two
seconds for rapid changes in water
level, up to one reading every
twelve hours.
The OM-CP-LEVEL1000
has the ability to record up to
16,383 readings and store it in
its non-volatile memory.
Its small size allows it to fit almost
anywhere. Data retrieval is simple.
Plug it into an empty USB port and
the easy to use Windows software
does the rest. The software
converts your PC into a real time
strip chart recorder. Data can be
printed in graphical or tabular
format and can also be exported
to a text or Microsoft Excel.
SPECIFICATIONS Temperature Sensor: Semiconductor Temperature Range:
-40 to 80°C (-40 to 176°F) Temperature Resolution: 0.1°C Calibrated Accuracy: ±0.5°C (0 to 50°C)
Pressure Sensor: Semiconductor strain gage Media Compatibility: Must be compatible with 303
stainless steel Level Nominal Range: 0 to 30' Resolution: 0.02" Calibrated Accuracy: ±8.3" of water (1.0" typical @ 25°C) Response Time: 90% change in 1 ms Repeatability: ±0.5% FSR; ±0.2% typical Proof Pressure: 45 psig Burst Pressure: 75 psig Desiccant: Indicating silica gel inside communications end cap
with viewing windows (blue = dry; pink = saturated). Desiccant Life: 7 days @ 99% RH; (can be generated by heating
canister @ 350°F for 1 hour)
GENERAL SPECIFICATIONS Memory: 16,383 readings per channel; 32,766 total readings Reading Rate: 1 reading every 2 seconds to 1 every 12 hours Start Modes: software programmable immediate start
or delay start up to six months in advance Real Time Recording: May be used with PC to monitor
and record data in real time Calibration: Digital calibration is available through software Calibration Date: Automatically recorded with device Battery Type: 3.6 V lithium battery included; user replaceable Battery Life: 1 year typical at 25°C Data Format: Date and time stamped, °C, °F, K, °R; PSI,
inches, feet, millimeters, centimeters, meters
(of water column), Time Accuracy: ± minute per month when RS-232
port is not in use Computer Interface:
PC serial or USB (interface cable required); 2400 baud Software: XP SP3/Vista/7 and 8 (32 and 64-bit) Operating Environment:
-40 to 80°C (-40 to 176°F) 0 to 100% RH Dimensions: Submersible End:
232 mm dia x 32 mm L
(9.1 x 1.25") Communications End:
181 mm dia x 31 mm L
(7.1 x 1.2"), plus cable Weight: 3 lb (1.4 kg)
注: Data logger is supplied with 30' long electrical interface cable/atmospheric pressure compensation tubing assembly. Contact Omega for other lengths. Comes complete with 3.6V lithium battery. Operator’s manual and USB interface cable are included with the OM-CP-IFC200 software/cable package (required for data logger operation, sold separately). NIST calibration for temperature only.