Automatically Converts your PC into a Strip Chart recorder
Low Battery Warning
Miniature Size
Interfaces to Tipping Bucket Rain Gauges or Pulse Output Flow Meters
Real Time Operation
Programmable Scale Factor/Offset Value Basic Unit
商品説明
The OM-CP-RFPULSE101A Series has been discontinued. Please see the OM-CP-RFPULSE2000A as
a possible alternative or contact our Data Acquisition Engineering department.
The OM-CP-RFPULSE101A is a
low-cost transmitting device that will
sense a pulse input or contact
closure from external sources such
as transducers or pulse initiators
(gas, water, and electric meters)
and transforms those inputs into
engineering units such as
gallons/minute. Once activated, the
OM-CP-RFPULSE101A senses
and transmits the number of pulses/
contact closures that occur within
adjacent "time bin" periods. The bin
period is 30 seconds to 12 hours. At
the end of each bin period, the total
number of pulses/counts is transmitted.
The OM-CP-RFPULSE101A
then starts another bin period. It will
also transmit the current status of its
input. This is ideal for recording the
status of a contact closure. Data is
received at the PC using our
receiving antenna that attaches
directly to the serial port. All
received data is time and date
stamped and stored directly in your
PC. Transmitted data is also logged
to the device’s memory for added
data security. The convenient slide
switch allows the transmitter to be
turned On or Off without affecting
the operation of the device.
The Windows software converts
your PC into a real time strip chart
recorder. Data can be printed in
graphical or tabular format and can
also be exported to a text or
Microsoft Excel file.
Specifications
Maximum Pulse Rate: 100 Hz Minimum Input Active (Low) Time: 4 ms Minimum Input Inactive (High) Time: 4 ms Input Signal: TTL, dry contact, inernal pullup, +30 Vdc max Input Low Signal: < 0.4 Vdc Input High Signal: < 2.7 Vdc Input Connection: Screw terminal Input Impedance: > 1 K . Readings: 4095 readings with selectable
memory wrap Recording Interval: 30 seconds to 12 hours,
selectable in software Range: 36 m (120 ft) line if sight RF Baud Rate: 4800 baud RF Carrier Frequency: 418 MHz RF Transmitter Operation:
Configurable in software RF Transmission Interval: 30 seconds to
12 hours, selectable in software Start Time: Start time
and data programmable
through software, up to
six months in advance Real Time Recording:
Device may be used with
PC to monitor and record
data in real time Engineering Units: Stored in
device, user may define any desired
scale and offset from ±1.0000E-31
to ±9.9999E+31 Power: 3.6 V lithium battery (included) Battery Life: At 15 minute reading
rate, 25°C: up to 6 months (100 Hz
input, 10% duty cycle); up to 1 year
(25 Hz input, 10% duty cycle); up to
5 years (1 Hz input, 1% duty cycle) Time Accuracy: ±1 minute/month (at 20 to 30°C) Data Format: Date and time stamped
pulses, other engineering units
programmable through software Direct Computer Interface: PC serial,
RS-232C COM or USB (interface cable
required), 57600 baud Software: XP SP3/Vista and 7
(32-bit and 64-bit) Operating Environment:
-20 to 80°C (-4 to 176°F)
5 to 95% RH non-condensing Dimensions: 35 x 54 x 15mm
(1.4 H x 2.15 W x 0.6 D) Enclosure: ABS plastic
注: Operator's manual and USB cable are included with the OM-CP-RFC200A Windows software (software sold separately).
