Sensor Power Supply Module - Discontinued

OM-320-PSM-2

スクロールダウンし、全ラインアップをご覧ください

Field Sensor Power - Current Loops and/or Voltage Excitation Source
Powered from System Batteries or External Power
Installs into OM-320, OMP-MNL and OMP-MODL Data Logging Systems
Control Input for ON/OFF Output Control via Software
Field Programmable Output Voltages: 5, 10, 15 and 24 Vdc
Low Power Design for Optimum Battery Life

商品説明

The OM-320-PSM-2 Power Supply Module as well as the OM-320, OM-420, OMP-MNL and OMP-MODL Series Data Loggers that it was used with have all been discontinued. Please see the OM-SQ2040 as a possible alternative data logger or contact our DAS Engineering department.

The OM-320-PSM-2 Power Supply Module provides excitation power for sensors used with the OM-320, OMP-MNL and OMP-MODL dataloggers. The OM-320-PSM-2 can supply 100 mA of current … sufficient to power up to five 4 to 20 mA loops. Alternatively it can be used as a voltage source for sensor excitation. A 5 Vdc output is standard and one additional output is available which can be jumper programmed in the field for 10, 15 or 24 Vdc output. Four standard versions of the OM-320-PSM-2 are available for use with the OM-320, OMP-MNL and OMP-MODL dataloggers or as a stand-alone module. The OM-320-PSM-2 draws its power from the standard datalogger D-cells or an external supply. The OM-320-PSM-2 outputs are cycled ON/OFF by a software controlled low-level 5 Vdc input from the associated datalogger which provides power only as required for sampling and minimizes power consumption and maximizes battery life. An LED indicator lights when the outputs are ON. Sensor excitation is easily programmed into the datalogger via the HyperWare software supplied with the datalogger.

For complete product specifications see the detailed data sheet in the related section below.

注文する（部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)

部品番号/Desc.

注文数

商品説明

OM-320-PSM-2

お問い合せ下さい

納期:

Metal case housed stand-alone module for door mounted installation into the OM-320 datalogger

OMP-MNL-PSM-2

お問い合せ下さい

納期:

Power supply module mounted into OMP-MODL stacking frame for installation into the OMP-MNL or OMP-MODL datalogger stacks. Typically specified if sensor power is desired but the OMP-MNL-BATT (six D-cell battery pack) module is not.

OMP-MNL-BATT-PSM-2

お問い合せ下さい

納期:

Power supply module incorporated into the OMP-MNL-BATT module (six D-cell battery pack.)

OMP-PSM-2-PP

お問い合せ下さい

納期:

Stand-alone portable power supply module including 6 D-cells which can be used to provide sensor and loop excitation and instrument power for other data acquisition equipment.

注: Power supply modules are supplied with complete operator’s manual.