Programmable DC Speed Control with Closed Loop Feedback and Digital LED Display for DC Motors Rated to 2 HP

OMDC-MD DC Speed Control

Programmable Digital DC Speed Control

^¥190,435 OMDC-MD10P

注文する

Adjustable Min/Max Speed
Adjustable Accel/Decel
NEMA 4X (IP66) Rating
Universal Power Supply, 85-265 Vac
Programmable Power-On Initial Settings
Jog Function Selectable from Many Input Options
Non-Volatile Memory Allows All Custom Settings to Be Stored for Future Use
Program Display for Any Engineering Unit
Speed Feedback Required (Encoder)

モータ - 関連する商品を探す
（見つからない場合はカスタマーサービスにご連絡ください）

商品説明

OMDC-MD10P controllers are used with linear encoders for precise speed control in Omega's manufacturing process for metal sheath thermocouple wire.

Sample Application: Synchronized conveyor controller with jog switch, the slave conveyor 2 will follow changes in speed made to the master conveyor 1. The jog switch allows positioning of conveyor 2 when system is stopped.

The OMDC-MD Series is a compact, programmable DC speed control with digital closed loop feedback and LED display for DC motors rated to 2 horsepower. An on-board microprocessor with non-volatile memory, coupled with sophisticated internal software, makes the OMDC-MD series speed control the ultimate value in accuracy and control. Programmable parameters include maximum and minimum set speed, decimal points, and operating mode (master or follower).

The OMDC-MD series speed control is simple to operate: set the desired RPM, rate, or time in the large 1/2" LED display by depressing the “Up” and “Down” pushbuttons on the front panel. Settings can be one digit at a time or fast sweep. The OMDC-MD series speed control settings are exact and repeatable. It will precisely control speed to ±1/2 RPM of set speed, long term. No calibrations of the control are necessary.

The OMDC-MD speed control is available in both 1/8 DIN and 1/4 DIN industry standard cutout dimensions, providing easy panel installation. These DC motor controllers can be set to RPM, FPM, GRP, process time, or any other engineering unit for easy operation.

SPECIFICATIONS
Temperature: -10 to 45°C (14 to 113°F)
AC Input Voltage: 85 to 265 Vac
Input Frequency: 50/60 Hz
Overload Capacity: 200% for 1 min
Speed Signal Input: 0-5 to 0-24 Vdc, 50K Pulses/Minute (833 Hz)
On-Board Power Supply: 5 Vdc, 50 mA
Faceplate Dimensions:
    OMDC-MD10P: 115 W x 58 H x 117 mm D (4.539 x 2.289 x 4.625")
    OMDC-MD3P: 115 W x 106 H x 117 mm D (4.54 x 4.18 x 4.625")

NOTE:   Speed feedback is required (encoder). Recommended:   OMDC-PU-40E (see below).

注文する（部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)

部品番号/Desc.

注文数

商品説明

120 VAC Input: 0-90 VDC Output 240 VAC Input: 0-180 VDC Output

OMDC-MD10P

¥209,479 (税込)
(税抜価格 ¥190,435)

納期: 6 週間

1/8 DIN panel mount, 5A, 0.5 HP at 90 VDC, 1 HP at 180 VDC

OMDC-MD3P

¥244,739 (税込)
(税抜価格 ¥222,490)

納期: 6 週間

1/4 DIN panel mount, 10A, 1 HP at 90 VDC, 2 HP at 180 VDC

OMDC-MD3P-1

¥261,058 (税込)
(税抜価格 ¥237,325)

納期: 6 週間

1/4 DIN, 10A, 1 HP at 90 VDC, 2 HP at 180 VDC, provision for remote pushbutton

Optional Sensor

OMDC-PU-20E

¥56,045 (税込)
(税抜価格 ¥50,950)

納期: 2 週間

Shaft mounted pick-up sensor, 10 pulses per revolution

OMDC-PU-40E

¥52,987 (税込)
(税抜価格 ¥48,170)

納期: 2 週間

Shaft mounted pick-up sensor, 20 pulses per revolution

注: Comes complete with operator’s manual.
Ordering Example: (1) OMDC-MD10P Digital closed loop DC speed control for max 1 HP motor with 5 Arm Amps, ¥190,435 plus (1) OMDC-PU-40E Shaft mounted pick-up sensor with 20 pulses per revolution, ¥48,170, ¥190,435 + 48,170 = ¥238,605

関連製品: