No Moving Parts - Solid State Circuity for Long Life
Compact Size
Low Power Consumption
商品説明
LIMITED STOCK AVAILABLE. This item is being discontinued. Please see the PSW-150 Series as a possible substitute.
PSW141 Series low differential pressure switches operate on the capacitive principle and are capable of sensing very low positive or negative pressures. In a capacitive cell, a very lightweight, responsive diaphragm deflects slightly when pressure is applied. This deflection results in a change in capacitance which is then detected and processed by solid state circuitry. Reliability and long life are inherent advantages of this design.
SPECIFICATIONS Set point is adjusted by a 20-turn potentiometer for fine resolution Repeatability: ±1% of set point Deadband: Factory set to 7% of range to prevent relay chatter Media Compatibility: Suitable for air or inert gases Overpressure: 8 times range maximum Port Connections: 4.8 mm ( 3 /16 ) dia. tube; suitable for 3.2 mm ( 1 /8 ") I.D. Tygon tubing or 6.3 mm ( 1 /4 " O.D.) polyethylene tubing Power Requirements: 12 Vdc models* = 9.5 to 16 Vdc @ 0.25 W 24 Vdc models* = 19 to 32 Vdc @ 0.25 W 24 Vac models = 19 to 32 Vac @ 1.50 W 120 Vac models = 100 to 140 Vac @ 1.70 W * Reverse polarity protected Electrical Connections: 3 /8 " terminal strip with #6 screw Output: SPDT (form C) relay 1 A, 24 Vdc or 0.5 A, 120 Vac resistive 0.3 A, 24 Vdc or 0.2 A, 120 Vac inductive 300,000 cycles minimum Isolation: Input to output 500 Vrms min. Dimensions: 76 W x 131 L x 36 H mm (3.0 x 5.15 x 1.4") Weight: 230 g (0.5 lb) Case Material: Flame retardant, glass-reinforced Noryl Operating Temperature: 0 to 45°C (32 to 113°F) Temperature Effect on Set Point: ±0.05%/°C Humidity Range: 20 to 90% RH non-condensing Shock: 10 g’s (11 ms) Vibration: 5 g’s to 50 Hz
Examples of pricing for popular models is referenced in the "To Order" box. Use the "Part Number Builder" below to get pricing for all available models.
注: (1) for 24 Vdc power specify model PSW142, no add’l charge; for 24 Vac power specify model PSW143; for 120 Vac power specify model PSW144, no add’l charge. (2) For switch energizing on falling pressure, change the suffix “R” to “F”; no add’l charge.
部品番号ビルダー
下記から仕様構成を選択し、ご注文ください
以下からオプションを選択:
(1)
Power : 1 : 12 Vdc power 2 : 24 Vdc power 3 : 24 Vac power 4 : 120 Vac power
(2)
Range (Inches of water) : -A : 0 to 0.1 -B : 0 to 0.2 -C : 0 to 0.3 -D : 0 to 0.5 -E : 0 to 1.0 -F : 0 to 2.0 -G : 0 to 3.0 -H : 0 to 5.0 -I : 0 to 10.0
(3)
Output Function : R : energize on rising pressure F : energize on falling pressure
