Modular Pressure Switches Compact Design Control Aplications

スクロールダウンし、全ラインアップをご覧ください

注文する

Economical Compact Modular Series
Silver Switch Contacts Rated at 10A at 250 Vac, 6A at 24 Vdc
DIN 43650 Standard (Included)
Easy Field Setting, with Hex 5 Allen Screw (Included)
Process Connections, 1/4 NPT Female, 7/16-20 UNF SAE-4, or G1/4 Female

圧力スイッチ - 関連する商品を探す
（見つからない場合はカスタマーサービスにご連絡ください）

商品説明

The PSW9 Series pressure switches are used in OEM applications, hydraulic power units, heavy industrial, test equipment, and ship building. The compact modular design makes them useful for both mobile and stationary hydraulic applications. A SPDT micro switch will change state on increasing pressure at the setpoint, and will reset when the pressure decreases below the set-point by the amount of the deadband. The long pressure spring allows for a precise adjustable set-point. The PSW9 features a captive set screw for industrial applications

SPECIFICATIONS
Set-Point Repeatability: ±2% typical
Set-Point Adjustment: Upon delivery, set-point is in the middle of the adjustable range; Turn adjustment screw CW to increase, and CCW to decrease
Hysteresis/Deadband: Less than or equal to 10% of maximum full range
Contact Rating: Silver 10 A @ 250 Vac, 6 A @ 24 Vdc
Switching Frequency: Maximum 60/minute
Wiring
    Pin 1: Common
    Pin 2: Normally closed
    Pin 3: Normally open
Electrical Connection: DIN 43650 with PG9, clamping range 6 to 8 mm (0.23 to 0.31")
Ambient Temperature Range
    Piston Switch: -20 to 80°C (-4 to 176°F)
Wetted Parts
    Process Fitting: Aluminum (AIMg4.5Mn)
    Piston: Steel (100Cr6)
    Housing: Aluminum (AIMg4.5Mn)
    Dynamic Seal: See table on next page, Buna-N or FKM
    Adjustment Screw: Stainless steel (1.4305)
    Electrical Plug: Polyamid
Environmental: NEMA 4 (IP65)
Shipping Weight: 175 g (0.39 lb)

注文する（部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)

部品番号/Desc.

注文数

商品説明

1/4 NPT

PSW9-AA10DB

お問い合せ下さい

納期:

Decreasing; psi 90 to 630 bar 6 to 44, Increasing; psi 145 to 725 bar 10 to 50, Maximum Hysteresis 10%, Operating Pressure; psi 3620 bar 250, Seal; Buna-N

PSW9-AB10DB

お問い合せ下さい

納期:

Decreasing; psi 220 to 2680 bar 15 to 185, Increasing; psi 290 to 2900 bar 20 to 200, Maximum Hysteresis 10%, Operating Pressure; psi 3620 bar 250, Seal; Buna-N

7/16-20 UNF

PSW9-EB10DV

お問い合せ下さい

納期:

Decreasing; psi 220 to 2680 bar 15 to 185, Increasing; psi 290 to 2900 bar 20 to 200, Maximum Hysteresis 10%, Operating Pressure; psi 3620 bar 250, Seal; FKM

PSW9-EC10DV

お問い合せ下さい

納期:

Decreasing; psi 510 to 5220 bar 35 to 360, Increasing; psi 580 to 5800 bar 40 to 400, Maximum Hysteresis; 10%, Operating Pressure; psi 7250 bar 500, Seal; FKM

G1/4

PSW9-2C10DB

お問い合せ下さい

納期:

Decreasing; psi 510 to 5220 bar 35 to 360, Increasing psi 580 to 5800 bar 40 to 400, Maximum Hysteresis; 10%, Operating Pressure; psi 7250 bar 500, Seal; Buna-N

PSW9-2A10DV

お問い合せ下さい

納期:

Decreasing; psi 90 to 630 bar 6 to 44, Increasing; psi 145 to 725 bar 10 to 50, Maximum Hysteresis; 10%, Operating Pressure; psi 3620 bar 250, Seal; FKM

注: Comes complete with DIN 43650, Hex screw, and operator’s manual.

部品番号ビルダー

下記から仕様構成を選択し、ご注文ください

以下からオプションを選択:

注: 有効な部品番号については、「商品仕様(PDF)」を参照ください。
ご不明な場合は、カスタマーサービス(0120-040-572 もしくは jpesales@dwyeromega.com)へお問合せください。