Industrial Smart Pressure Transmitter, Long Term Reliability

PX2088

スクロールダウンし、全ラインアップをご覧ください

注文する

HART Protocol Ready
20:1 Turndown
External Zero and Span
0.20% Accuracy
Security Jumpers
Dual Compartment Housing (watertight electronics compartment)
Individually Characterized and Digitally Compensated
RFI Protection

圧力センサ (圧力変換器) - 関連する商品を探す
（見つからない場合はカスタマーサービスにご連絡ください）

商品説明

OMEGA’s PX2088S Series smart pressure transmitters maintain a specification conformance of at least 3σ The reliable performance of these rugged transmitters, when coupled with the broad selection of options, makes these transducers an exceptional value for tough process applications. The PX2088S is designed to operate safely in the event of damage or failure to the sensor diaphragm. The electronics compartment is isolated from the process by 2 seals.

A third seal isolates the field terminals and conduit entries. This design ensures against housing pressurization and process contamination.

The electronics incorporates an ASIC module that accepts the digital signal from the sensor, along with the correction coefficients, then corrects and linearizes the signal. This is then converted to an analog signal for retransmission. The output section also handles the HART® communications.

SMART FUNCTIONALITY
The PX2088S smart transducer HART® protocol allows easy access to configuration, test, and setup capabilities. The PX2088S can be configured using a HART® communicator or another HART®-based communications device. Configuration consists of two steps. First, the transmitter operational parameters are set including:
    – Zero and span
    – Damping
    – Engineering units

Second, data can be entered into the transmitter to allow identification and physical description of the transmitter. These data include:
    – Tag: 8 alphanumerics
    – Descriptor: 16 characters
    – Message: 32 characters – Date – Integral meter installation – Remote seal information

In addition to the configurable parameters, the PX2088 software contains information that is not userchangeable. Non-configurable information includes:
    – Transmitter type
    – Sensor limits
    – Minimum span
    – Fill fluid
    – Isolator material
    – Module serial number
    – Transmitter software revision level

SPECIFICATIONS
Excitation: 10.5 to 36 Vdc unregulated, reverse polarity protected
Supply Effect: <0.01% span/V
Zero Elevation and Suppression: Zero can be suppressed between atmosphere (or 0 psia for absolute ranges) and the upper range limit (URL), provided the span is ≥ the minimum span and the URL does not exceed the units URL. No vacuum calibrations are allowed on the gage pressure models.
Overpressure Limits:
    8 and 30 psi Ranges: 120 psi
    >30 psi Ranges: 2x URL
Process Temperature Limits:
    Silicon Fill: -40 to 121°C (-40 to 250°F)
    Inert Fill: -30 to 121°C (-20 to 250°F)
Ambient Temperature Limits:
    Standard: -40 to 85°C (-40 to 185°F)
    LCD Meter: -20 to 80°C (-4 to 175°F)
Volumetric Displacement: <0.00042 cm³
Accuracy: Includes linearity, hysteresis and repeatability
    Smart: ±0.20% of calibrated span
    Analog: ±0.25% of calibrated span
Ambient Temperature Effect:
    Smart: ±(0.003% URL + 0.003% span)/°F
    Analog (Ranges >8 psi): -40 to 0°F ±(0.007% URL + 0.008% span)/°F; -0 to 140°F ±(0.005% URL + 0.005% span)/°F; 140 to 185°F ±(0.007% URL + 0.008% span)/°F
Stability:
    Smart: ±0.10% URL for 12 months
    Analog: ±0.25% URL for 12 months
Vibration: ±1% URL 4 mm pk/pk 5 to 15 Hz and constant acceleration of 2 g (15 to 150 Hz) and 1 g (150 to 2000 Hz)
Process Connection: ½ to 14 FNPT
Wetted Parts: 316 SS (Hastelloy® optional)
Electronic Housing: Sealed to NEMA 4X (IP66), low-copper aluminum with polyurethane paint; cover O-ring is Buna-N
Electrical Connections: ½ to 14 NPT conduit
Fill Fluid: Silicon oil, standard.
Weight:
    Smart: 1.11 kg (2.44 lb)
    Analog: 0.86 kg (1.9 lb)
Fitting Material/Fill Options: (add suffix)
    SS/Silicon Oil: Standard
    Hastelloy/Silicon Oil: "-33"

注文する（部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)

部品番号/Desc.

注文数

商品説明

PX2088S-30GI

お問い合せ下さい

納期:

0-1.5 / 0-30 psi min/max span smart Gage transducer with 4-20 mA output

PX2088S-150GI

お問い合せ下さい

納期:

0-7.5 / 0-150 psi min/max span smart Gage transducer with 4-20 mA output

PX2088S-600GI

お問い合せ下さい

納期:

0-30 / 0-600 psi min/max span smart Gage transducer with 4-20 mA output

PX2088S-4KGI

お問い合せ下さい

納期:

0-200 / 0-4,000 psi min/max span smart Gage transducer with 4-20 mA output

PX2088-MB

お問い合せ下さい

納期:

Optional 2' Pipe Mounting Bracket

注: See Specifications for Fitting Material and Fill Fluid options.Absolute Pressure ranges and options availible, consult Part Number Builder below for model numbers.

部品番号ビルダー

下記から仕様構成を選択し、ご注文ください

	(1)	(2)		(3)	(4)
PX2088S			I

以下からオプションを選択:

(1) Range (min/max span psi) :
-30 : 0-1.5/0-30
-150 : 0-7.5/0-150
-600 : 0-30/0-600
-4K : 0-200/0-4000

(2) Pressure Range :
G : Gage Pressure
A : Absolute Pressure

(3) LCD Meter :
オプション選択がない場合 : No LCD Meter
M5 : LCD Meter scaled 0-100% (adds $250)

(4) Fill Options :
オプション選択がない場合 : SS/Silicon Oil Standard
-33 : Hastelloy/Silicon Oil

注: 有効な部品番号については、「商品仕様(PDF)」を参照ください。
ご不明な場合は、カスタマーサービス(0120-040-572 もしくは jpesales@dwyeromega.com)へお問合せください。