High Accuracy Melt Pressure Transducers - Discontinued

PX330

High Accuracy Melt Pressure Transducers

^¥163,480 PX330-3KGV

3 1 /2 ", 6" & 12" Barrels, Heavy Duty Stainless Steel Construction, Adaptable to a Wide Range of Space Requirements
0.5% FS and 1% FS Accuracy Models
Force Rod Construction, No Fill-Fluid to Contaminate System
High Temperature Design—750°F at the Diaphragm to Work with Today’s Higher Extrusion Temperatures
Fits Standard Sensor Wells
Calibration Sheet Supplied with Each Transducer
Rupture-Resistant Diaphragms in 17-4 PH Stainless Steel, Hastelloy C-276, and Hard Chrome Plate

商品説明

OMEGA is proud to feature state-of- the-art melt pressure transducers for general purpose and precision requirements. We also offer digital indicator/controllers, thermocouples, accessory cables, and connectors for plastic extrusion. Our transducers have been selected for applications with abrasive, non-abrasive, corrosive, or non-corrosive material. They offer a choice of 1% or 0.5% accuracy, and they feature stainless steel barrels in 3 lengths to meet the space requirements imposed by complex machinery, piping, and insulation.

Models 330, 335, 340, 341, 370, 371
Offered in 88.9, 152.4, and 304.8 mm (3½, 6, and 12") barrel lengths, these transducers feature a 17-4 PH stainless steel diaphragm for melt pressure usage with non-corrosive and non-abrasive materials; ±1% FS non-linearity (models 330, 340, 341) for general purpose applications; ±0.5% FS non-linearity (models 335, 370, 371) for high accuracy; and a -17.7 to 399°C (0 to 750°F) operating range.

Models 350, 351, 380, 381 are offered in 6" and 12" units with Hastelloy C-276 diaphragm for melt pressure usage with corrosive materials such as PTFE, Kynar® and fluorocarbon polymers. These transducers also feature ±1% FS non-linearity (models 350, 351) for general purpose applications; ±0.5% FS non-linearity (models 380, 381) for high accuracy; and a -17.7 to 399°C (0 to 750°F) operating range.

Models 360, 361, 390, 391
Offered in 152.4 and 304.8 mm (6 and 12") units with hard chrome plate diaphragm for melt pressure usage with abrasive materials such as fiberglass, aluminum, and cereal. These transducers also feature ±1% FS non-linearity (models 360, 361) for general purpose applications; ±0.5% FS non-linearity (models 390, 391) for high accuracy; and a -17.7 to 399°C (0 to 750°F) operating range. Built-In Thermocouples. Models with OMEGA's Type J (Iron-Constantan) or K (CHROMEGA™-ALOMEGA™) high accuracy thermocouples enable simultaneous temperature/pressure measurements up to 399°C (750°F). These transducers are designed for applications in which precision control is critical and where space for only one sensor is available.

SPECIFICATIONS
Accuracy: ±:0.5% or ±:1.0% FS
Repeatability: Within ±:0.1% FS maximum
Resolution: Infinite
Overload Pressure: 150% of rated range, no damage
Sensor Type: Bonded strain gage, 4-leg Wheatstone bridge
Bridge Resistance: 350 Ω ±5.0%
Sensitivity: 3.0 mV/V nominal
Zero Balance: ±10.0%
Excitation: 5 to 12 Vdc or Vac (rms), 15 V max
External Shunt Calibration Resistor: Standard feature (also available to be Dynisco compatible)
Insulation Resistance: 100 MΩ @ 50 Vdc
Thermocouple:Types J and K available as indicated
TEMPERATURE CHARACTERISTICS
Diaphragm: -18 to 400°C (0 to 750°F)
Electrical Connector: -18 to 121°C (0 to 250°F)
Zero Drift: ±0.01% FS/°:F ±0.02% FS/°C
Sensitivity-Drift: ±0.01% FS/°F (±0.02% FS/°C)
MECHANICAL CHARACTERISTICS
Diaphragm Material: Standard 17-4 PH stainless steel. Other choices include hard chrome plate, Hastelloy C-276.
Pressure Fitting: 1/2-20 UNF-2A
Mounting Torque: 10 foot-pounds min 20 foot-pounds max
Electrical Connector: WK6-325
Mating Connector: WK6-21C-1/4 (not included)
Weight:
   3½" = 145 g (0.32 lb)
   6" = 309 g (0.68 lb)
   12" = 560 g (1.23 lb)

注文する（部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)

部品番号/Desc.

注文数

商品説明

PX351-10KGV

お問い合せ下さい

納期:

indicates Hastelloy diaphragm, 12 in barrel and 1% accuracy with a range of 0 to 10,000 psi.

PX351J-10KGV

お問い合せ下さい

納期:

indicates same as above with optional J thermocouple.

CX340-10

お問い合せ下さい

納期:

10' PFA Cable-Mating Connector/Spade Lugs with no thermocouple

CX340-10J

お問い合せ下さい

納期:

10' PFA Cable-Mating Connector/Spade Lugs with type J thermocouple

CX340-10K

お問い合せ下さい

納期:

10' PFA Cable-Mating Connector/Spade Lugs with type K thermocouple

CX340A-10

¥21,340 (税込)
(税抜価格 ¥19,400)

納期: 2 週間

10' Armored Cable-Mating Connector/Spade Lugs with no thermocouple

CX340A-10J

お問い合せ下さい

納期:

10' Armored Cable-Mating Connector/Spade Lugs with type J thermocouple

CX340A-10K

お問い合せ下さい

納期:

10' Armored Cable-Mating Connector/Spade Lugs with type K thermocouple

WK6-21C-1/4

お問い合せ下さい

納期:

Mating Connector

注: Mating connector or cables sold separately.
Ordering Example: (1) PX351-10KGV indicates Hastelloy diaphragm, 12 in barrel and 1% accuracy with a range of 0 to 10,000 psi., ¥217,585

部品番号ビルダー

下記から仕様構成を選択し、ご注文ください

	(1)	(2)		(3)
PX3			-

以下からオプションを選択:

(1) Barrel Length - Diaphragm Material - Accuracy FS (non-linearity BFSL) :
30 : 3 1/2 in. - Stainless Steel - 1%
35 : 3 1/2 in. / Stainless Steel / 0.5%
40 : 6 in. / Stainless Steel / 1%
41 : 12 in. / Stainless Steel / 1%
50 : 6 in. / Hastelloy / 1%
51 : 12 in. / Hastelloy / 1%
60 : 6 in. / Hard Chrome / 1%
61 : 12 in. / Hard Chrome / 1%
70 : 6 in. / Stainless Steel / 0.5%
71 : 12 in. / Stainless Steel / 0.5%
90 : 6 in. / Hard Chrome / 0.5%
91 : 12 in. / Hard Chrome / 0.5%

(2) Thermocouple :
: Leave Blank for No Thermocouple
J : Optional J Thermocouple
K : Optional K Thermocouple

(3) Range (psi) :
500GV : 0-500
1000GV : 0-1000
1500GV : 0-1500
3KGV : 0-3000
5KGV : 0-5000
10KGV : 0-10000
15KGV : 0-15000

注: 有効な部品番号については、「商品仕様(PDF)」を参照ください。
ご不明な場合は、カスタマーサービス(0120-040-572 もしくは jpesales@dwyeromega.com)へお問合せください。