Paperless Recorder - Discontinued

RD-MV100

スクロールダウンし、全ラインアップをご覧ください

Up to 12 Channels on RD-MV100
Up to 30 Channels on RD-MV200
Programmable Inputs: Thermocouple, RTD, Voltage
TFT Color LCD for Better Viewing
Removable Storage on 3.5" Floppy Disk, Zip Disk, or PCMCIA ATA Flash Memory Card
Data Collection Over Ethernet Network (Standard)
Network-Compatible Sophisticated Software
Highly Reliable Hardware

商品説明

The RD-MV100 Series has been discontinued. Please see the RD9900 Series as a possible alternative or contact our Data Acquisition Engineering Department.

Features

5.5-inch LCD color display, wide-viewing-angle (RD-MV100)

10.4 inch LCD color display, wide-viewing-angle (RD-MV200)

Status display area
Graphically displays the operating status of the RD-MV100/RD-MV200

Trend display area
(simultaneous display of all channels possible) Displays the scale values and engineering unit for each channel and arbitrary messages, along with the waveforms. The orientation (vertical/ horizontal) of the trend display and background color (white/black) can be switched. The fastest trend display update rate is 15 sec/div (approximately 2376 mm/h in terms of display speed) for a 125-ms measurement interval model.

Digital display area
Displays channels/tag numbers, engineering units, and each channel's alarm status, as well as the measurement values. The fastest display update interval is 1 second.

Reliable Data Storage in Internal Reliable Data Storage in Internal Memory
The RD-MV100/200 saves measurement data in internal memory. Data in internal memory can also be transferred to PCs or data servers either online or using a removable storage medium. The measurement data memory consists of nonvolatile flash memory (1.2 MB) that does not require battery backup. This means data written to memory will not be lost due to events such as a power outage.

Simultaneous Extended-Period Data Storage and Detailed Analysis Simultaneous Extended-Period Data Storage and Detailed Analysis
Display data. for extended-period trend recording
The display data format is used to save data displayed as waveforms. Each time the waveform display is updated, two data values (maximum and minimum values) measured since the previous update are saved.
Event data. for detailed analysis
The event data format is used to save all data in a specified data saving interval. Event data can be used in combination with the trigger functions to detect and analyze abnormal data. A pretrigger can also be set, making it possible to analyze data before and after the trigger.

Removable storage drive
Choose from a floppy disk drive, Zip drive, or PCMCIA ATA flash memory card slot.

Network Communication Options
Ethernet (10BASE-T), RS-232 or RS-422-A/485
The RD-MV100/RD-MV200 can easily be connected directly to a PC, even without using general communication protocols such as GP-IB and RS-232-C. Use a cross Ethernet cable for a one-to-one connection.

Optional Alarm output and remote control

Input modules
DC voltage, TC, RTD and digital inputs (can be mixed). Clamp or screw terminals can be selected

Input	Range/Type	Measuring range		Measurement accuracy (digital display)	Digital display maximum resolution
DCV	20mV	-20.00 to 20.00 mV		±(0.1% of rdg + 2 digits)	10 µV
	60mV	-60.00 to 60.00 mV			10 µV
	200mV	-200.00 to 200.00 mV			100 µV
	2V	-2.000 to 2.000 V			1 mV
	6V	-6.000 to 6.000 V			1 mV
	20V	-20.00 to 20.00 V			10 mV
TC	R	0.0 to 1760.0°C	32 to 3200°F	±(0.15% of rdg + 1°C) R, S: 0 to 100°C, ±3.7°C; 100 to 300°C, ±1.5°C B: 400 to 600°C, ±2°C; if less than 400°C, accuracy is not guaranteed.	0.1°C
	S	0.0 to 1760.0°C	32 to 3200°F
	B	0.0 to 1820.0°C	32 to 3200°F
	K	200.0 to 1370.0°C	-328 to 2498°F	±(0.15% of rdg + 0.7°C) If -200 to -100°C, then ±(0.15% of rdg + 1°C)
	E	-200.0 to 800.0°C	-328.0 to 1472.0°F	±(0.15% of rdg + 0.5°C)
	J	200.0 to 1100.0°C	-328.0 to 2012.0°F	±(0.15% of rdg + 0.5°C) If -200 to -100°C, then ±(0.15% of rdg + 0.7°C)
	T	-200.0 to 400.0°C	-328.0 to 752.0°F
	N	0.0 to 1300.0°C	32 to 2372°F	±(0.15% of rdg + 0.7°C)
	C	0.0 to 2315.0°C	-328.0 to 4199°F	±(0.15% of rdg + 1°C)
	L	-200.0 to 900.0°C	-328.0 to 1652.0°F	±(0.15% of rdg + 0.5°C) If -200 to -100°C then ±(0.15% of rdg + 0.7°C)
	U	-200.0 to 400.0°C	-328.0 to 752.0°F
RTD	Pt100	-200.0 to 600.0°C		±(0.15% of rdg + 0.3°C)
RTD	JPt100	-200.0 to 550.0°C		±(0.15% of rdg + 0.3°C)
DI	Voltage Input	OFF: Less than 2.4 V ON: 2.4 V or greater
DI	Contact inputt	Contact ON/OFF

注文する（部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)

部品番号/Desc.

注文数

商品説明

RD-MV104-1

お問い合せ下さい

納期:

4-Channel 5.5" Display Recorder, (125ms measurement interval)

RD-MV104-3-2/M1

お問い合せ下さい

納期:

4-Channel 5.5" Display Recorder, (125ms measurement interval) with Math Function and 12 VDC power supply

RD-MV204-1

お問い合せ下さい

納期:

4-Channel, 10.4" Display Recorder (125ms measurement interval)

RD-MV204-1

お問い合せ下さい

納期:

4-Channel, 10.4" Display Recorder (125ms measurement interval)

RD-MV208-2

お問い合せ下さい

納期:

8-Channel, 10.4" Display Recorder (125ms measurement interval) with Zip Disk

注: Standard units include floppy disk storage, 120/240 Vac power, 3-pin power inlet with UL/CSA cable, clamp input terminals, and complete operator’s manual.
To order Zip disk or ATA flash card change the “-1” to “-2” or “-3” respectively and add $166.
To order with 12 Vdc power input (includes AC adaptor), add suffix “-2” to model number and add $386.
To order with different power cord add suffix “-F” for VDE, “-R” for SAA, or “-S” for BS cable to model number. No additional cost.
(OPTIONS SHOWN IN THIS "NOTE" ABOVE ARE PRICED IN US$)

製品マニュアル:

ダウンロード RD-MV200 - RD-MV200 Series Recorder User Manual

ダウンロード RD-MV100/200 - RD-MV100/200 Communications Interface Manual

ダウンロード RD-MV100 - RD-MV100 Series Recorder User Manual