Heavy Duty Threaded Thermowell for 1/4 Inch Diameter Elements

SERIES 260HL

^¥12,525 3/4-260HL-U21/2-BRASS

Available in Carbon Steel and Stainless Steel
Standard Insertion Lengths from 2 1/2 to 19 1/2 Inches
3/4 Inch and 1 Inch External NPT Thread

端子箱 / 保護管 / サーモウェル - 関連する商品を探す
（見つからない場合はカスタマーサービスにご連絡ください）

商品説明

Application:
Standard length, 1/4" bimetal thermometers. #20 gage thermocouple elements. Unarmored liquid-in-glass test thermometers. Other temperature-sensing elements having .252 in. maximum diameter.

Connection Size:
3/4" NPT and 1" NPT are standard. Other thread sizes are available upon request.

Materials:
Brass (ASTM B-16), Carbon Steel (C-1018), Stainless Steel A.I.S.I. 304 & A.I.S.I. 316, Monel. Wells are also available in special materials; prices on request.

Series 260HL—Lagging Extension Type
All dimensions in inches.

* NPSM internal pipe thread will accept both NPT and NPS male threads.

Ext. Th'd P	Model No.	Lag. Ext. T	Elem. Lgth. A	Insert. Lgth. U	Shank Dia. Q
3/4" NPT	3/4-260HL-U 2 1/2 -U 4 1/2 -U 7 1/2 -U10 1/2 -U13 1/2 -U19 1/2	2 3 3 3 3 3	6 9 12 15 18 24	2 1/2 4 1/2 7 1/2 10 1/2 13 1/2 19 1/2	7/8 7/8 7/8 7/8 7/8 7/8
1" NPT	1-260HL-U 2 1/2 -U 4 1/2 -U 7 1/2 -U10 1/2 -U13 1/2 -U19 1/2	2 3 3 3 3 3	6 9 12 15 18 24	2 1/2 4 1/2 7 1/2 10 1/2 13 1/2 19 1/2	1 1/16 1 1/16 1 1/16 1 1/16 1 1/16 1 1/16

Maximum Fluid Velocity—feet per second

Well Type	Material	Insertion Length – “U”
Well Type	Material	2 1/2	4 1/2	7 1/2	10 1/2	13 1/2	16 1/2	19 1/2	22 1/2
3/4" - 260H and 3/4" - 260HL	Brass	305 (97.5)	93.8 (54.1)	33.9	17.1	10.5	7	5	3.7
	Carbon Steel	386 (175)	180 (97.2)	65.3 (58.3)	33	20.1	13.4	9.6	7.1
	A.I.S.I. 304 & 316	440 (243)	197 (135)	71.2	36	22	14.7	0.5	7.8
	Monel	354 (195)	155 (108)	56.1	28.4	17.3	11.6	7.5	5.6
1" - 260H and 1" - 260HL	Brass	354 (161)	108 (89.5)	39.4	19.8	12.2	8.1	5.8	4.3
	Carbon Steel	448 (289)	209 (161)	75.7	38.4	23.3	15.5	11.1	8.2
	A.I.S.I. 304 & 316	490 (403)	228 (225)	82.5	41.8	25.5	17.1	12.2	9.1
	Monel	410 (322)	179 (178)	65.1	33	20.1	13.5	8.7	6.5

Where single values appear in the velocity tables, these may be considered safe for water, steam, air or gas. In the shorter insertion lengths, consideration is given to the velocity pressure effect of water flowing at higher velocities. The values in parentheses, therefore, represent safe values for water flow, while the unbracketed values may be used for steam, air, gas and similar density fluids.

注文する（部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)

部品番号/Desc.

注文数

商品説明

Example part numbers are shown below. For additional configurations see the Part Number Builder below this table.

3/4-260HL-U21/2-BRASS

¥13,778 (税込)
(税抜価格 ¥12,525)

納期: 10 週間

Heavy Duty Thread Well, 3/4" NPT, 2 1/2 Insertion length, Brass

3/4-260HL-U21/2-CS

¥13,778 (税込)
(税抜価格 ¥12,525)

納期: 10 週間

Heavy Duty Thread Well, 3/4" NPT, 2 1/2 Insertion length, Carbon Steel

1-260HL-U191/2-304SS

¥65,505 (税込)
(税抜価格 ¥59,550)

納期: 10 週間

Heavy Duty Thread Well, 1" NPT, 19 1/2 Insertion length, 304 SS

部品番号ビルダー

下記から仕様構成を選択し、ご注文ください

(1)		(2)		(3)
	-260HL-U		-

以下からオプションを選択:

(1) External thread - NPT :
3/4 : 3/4 in.
1 : 1 in.

(2) Insertion length dimension :
21/2 : 2 1/2 in.
41/2 : 4 1/2 in.
71/2 : 7 1/2 in.
101/2 : 10 1/2 in.
131/2 : 13 1/2 in.
191/2 : 19 1/2 in.

(3) Material :
304SS : 304 SS
316SS : 316 SS
CS : Carbon Steel
BRASS : Brass

注: 有効な部品番号については、「商品仕様(PDF)」を参照ください。
ご不明な場合は、カスタマーサービス(0120-040-572 もしくは jpesales@dwyeromega.com)へお問合せください。