Van Stone Thermowells for 1/4 and 3/8 Inch Diameter Elements

SERIES 260V and 385V

^¥30,195 1-260V-U2-304SS

Available in Carbon Steel and Stainless Steel
Standard Insertion Lengths from 2 to 22 Inches

端子箱 / 保護管 / サーモウェル - 関連する商品を探す
（見つからない場合はカスタマーサービスにご連絡ください）

商品説明

Application:
260V series fits standard length 1/4" diameter elements. 385V series fits standard length 3/8" diameter elements.

Connection Size:
Standard wells fit 1" lap joint flanges. Other sizes also available. Prices below are for 1" Van Stone Wells. Consult factory for prices on other sizes.

Materials:
Carbon Steel (C-1018), A.I.S.I. 304, A.I.S.I. 316 and Monel are standard. Other materials are available.

Backing Flange:
When desired, a carbon steel lap joint flange can be supplied with these wells. When ordering, specify flange pressure.

Series 260V and 385V
All dimensions in inches.

* NPSM internal pipe thread will accept both NPT and NPS male threads.

Model No.	Element Length A	Insertion Length U	Shank Diameter Q	Bore Diameter Q
1-260V-U 2 -U 4 -U 7 -U10 -U13 -U16 -U22	4 6 9 12 15 18 24	2 4 7 10 13 16 22	3/4 3/4 3/4 3/4 3/4 3/4 3/4	.260 .260 .260 .260 .260 .260 .260
1-385V-U 2 -U 4 -U 7 -U10 -U13 -U16 -U22	4 6 9 12 15 18 24	2 4 7 10 13 16 22	7/8 7/8 7/8 7/8 7/8 7/8 7/8	.385 .385 .385 .385 .385 .385 .385

Maximum Fluid Velocity—feet per second

Well Type	Material	Insertion Length – “U”
Well Type	Material	2	4	7	10	13	16	22
260V and 260F	Carbon Steel	404 (129)	184 (71.2)	67.0 (42.7)	34	20.6	13.7	7.4
	A.I.S.I. 304 & 316	430 (179)	192 (99.3)	69.7 (59.6)	35.4	21.5	14.3	7.7
	Monel	350 (143)	168 (79.8)	61 (47.7)	31	18.8	12.5	6.7
385V and 385F	Carbon Steel	410 (152)	248 (84.3)	91.3 (50.6)	45.7	27.6	18.5	10
	A.I.S.I. 304 & 316	444 (211)	258 (117)	95.2 (70.3)	47.6	28.8	19.3	10.4
	Monel	338 (168)	226 (93.3)	83.3 (56.0)	41.6	25.2	16.9	9.1

Where single values appear in the velocity tables, these may be considered safe for water, steam, air or gas. In the shorter insertion lengths, consideration is given to the velocity pressure effect of water flowing at higher velocities. The values in parentheses, therefore, represent safe values for water flow, while the unbracketed values may be used for steam, air, gas and similar density fluids.

注文する（部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)

部品番号/Desc.

注文数

商品説明

Example part numbers are shown below. For additional configurations see the Part Number Builder below this table.

1-260V-U2-304SS

¥33,215 (税込)
(税抜価格 ¥30,195)

納期: 10 週間

Van Stone Thermowell, Bore Size 0.260" , Insertion Length 2", 304 SS

1-260V-U10-316SS

¥71,297 (税込)
(税抜価格 ¥64,815)

納期: 10 週間

Van Stone Thermowell, Bore Size 0.260" , Insertion Length 10", 316 SS

1-385V-U22-304SS

¥81,604 (税込)
(税抜価格 ¥74,185)

納期: 10 週間

Van Stone Thermowell, Bore Size 0.385" , Insertion Length 22", 304 SS

部品番号ビルダー

下記から仕様構成を選択し、ご注文ください

	(1)		(2)		(3)
1-		V-U		-

以下からオプションを選択:

(1) Bore Size :
260 : Bore Diameter .260 in.
385 : Bore Diameter .385 in.

(2) Insertion length dimension :
2 : 2 in.
4 : 4 in.
7 : 7 in.
10 : 10 in.
13 : 13 in.
16 : 16 in.
22 : 22 in.

(3) Material :
304SS : 304 SS
316SS : 316 SS

注: 有効な部品番号については、「商品仕様(PDF)」を参照ください。
ご不明な場合は、カスタマーサービス(0120-040-572 もしくは jpesales@dwyeromega.com)へお問合せください。