Standard Threaded Thermowell for 3/8 Inch Diameter Elements

SERIES 385L

^¥9,005 3/4-385L-U21/2-BRASS

注文する

Available in Carbon Steel and Stainless Steel
Standard Insertion Lengths from 2 1/2 to 19 1/2 Inches
3/4 Inch and 1 Inch External Diameter

端子箱 / 保護管 / サーモウェル - 関連する商品を探す
（見つからない場合はカスタマーサービスにご連絡ください）

商品説明

Application:
Standard length, 3/8" stem, bimetal thermometers. #14 gage thermocouple elements. Armored liquid-in-glass test thermometers. Other temperature-sensing elements having .377 in. maximum diameter.

Connection Size:
3/4" NPT and 1" NPT are standard. Other thread sizes are available upon request.

Materials:
Brass (ASTM B-16); Carbon Steel (C-1018); Stainless Steel A.I.S.I. 304 & A.I.S.I. 316; Monel. Wells are also available in special materials; prices on request.

Series 385L—Lagging Extension Type
All dimensions in inches.

* NPSM internal pipe thread will accept both NPT and NPS male threads.

External Thread P	Model No.	Lag. Ext. T	Elem. Lgth. A	Insert. Lgth. U
3/4" NPT	3/4-385L-U 2 1/2 -U 4 1/2 -U 7 1/2 -U10 1/2 -U13 1/2 -U19 1/2	2 3 3 3 3 3	6 9 12 15 18 24	2 1/2 4 1/2 7 1/2 10 1/2 13 1/2 19 1/2
1" NPT	1-385L-U 2 1/2 -U 4 1/2 -U 7 1/2 -U10 1/2 -U13 1/2 -U19 1/2	2 3 3 3 3 3	6 9 12 15 18 24	2 1/2 4 1/2 7 1/2 10 1/2 13 1/2 19 1/2

Maximum Fluid Velocity—feet per second

Well Type	Material	Insertion Length – “U”
Well Type	Material	2 1/2	4 1/2	7 1/2	10 1/2	13 1/2	16 1/2	19 1/2	22 1/2
3/4" - 385S and 3/4" - 385L	Brass	290 (145)	150 (80)	54.1 (48)	27.6	16.7	11.1	8	6
	Carbon Steel	326 (260)	192 (144)	69.5	35.4	20.5	14.3	10.3	7.7
	A.I.S.I. 304 & 316	349 (360)	199	71.9	36.6	21.2	14.8	10.7	8
	Monel	316 (320)	189 (178)	68.1	34.8	20.8	14	10	7.5

Where single values appear in the velocity tables, these may be considered safe for water, steam, air or gas. In the shorter insertion lengths, consideration is given to the velocity pressure effect of water flowing at higher velocities. The values in parentheses, therefore, represent safe values for water flow, while the unbracketed values may be used for steam, air, gas and similar density fluids.
See 385S Thermowell Page for Pressure-Temperature Ratings

注文する（部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)

部品番号/Desc.

注文数

商品説明

Example part numbers are shown below. For additional configurations see the Part Number Builder below this table.

3/4-385L-U21/2-BRASS

¥9,906 (税込)
(税抜価格 ¥9,005)

納期: 2 週間

Standard Threaded Well, External Thread - NPT 3/4", Insertion Length Dimension 2 1/2", Brass

3/4-385L-U41/2-304SS

¥17,617 (税込)
(税抜価格 ¥16,015)

納期: 10 週間

Standard Threaded Well, External Thread - NPT 3/4", Insertion Length Dimension 4 1/2", 304 SS

1-385L-U101/2-CS

お問い合せ下さい

納期:

Standard Threaded Well, External Thread - NPT 1", Insertion Length Dimension 10 1/2", Carbon Steel

部品番号ビルダー

下記から仕様構成を選択し、ご注文ください

(1)		(2)		(3)
	-385L-U		-

以下からオプションを選択:

(1) External thread - NPT :
3/4 : 3/4 in.
1 : 1 in.

(2) Insertion length dimension :
21/2 : 2 1/2 in.
41/2 : 4 1/2 in.
71/2 : 7 1/2 in.
101/2 : 10 1/2 in.
131/2 : 13 1/2 in.
191/2 : 19 1/2 in.

(3) Material :
304SS : 304 SS
316SS : 316 SS
CS : Carbon Steel
BRASS : Brass

注: 有効な部品番号については、「商品仕様(PDF)」を参照ください。
ご不明な場合は、カスタマーサービス(0120-040-572 もしくは jpesales@dwyeromega.com)へお問合せください。