Drum Immersion Heaters for High Viscosity Solutions and Adjustable Stainless Steel Mounting Bracket

TAT3

Drum Immersion Heaters for High Viscosity Solutions

スクロールダウンし、全ラインアップをご覧ください

注文する

Fits Through the Standard 51 mm (2") Bung Opening in 55 Gallon Drums
Ideal for Improving the Flow of Lard, Tar, Oils and Other High Viscosity Solutions
Double Pole 16 to 121ºC (60 to 250°F) Thermostat with Over- Temperature Cutout and Pilot Lamp to Indicate Heater On/Off Status
Only 203 mm (8") of Vertical Riser is Heated, Allowing Liquid Level to Fluctuate without Damaging the Heater
Adjustable Stainless Steel Mounting Bracket

水中ヒータ - 関連する商品を探す
（見つからない場合はカスタマーサービスにご連絡ください）

商品説明

Installation, Operation and Maintenance Instructions
1. Ensure the Vertical Heated Portion, Which Extends 203 mm (8") Up Riser from Bottom of Element, is Always Fully Immersed
2. Use in Metal Drums, Containers or Heat Resistant Tanks Only
3. All Wiring Should Be in Accordance with NEC/Nfpa and Local Codes
4. Use Techniques Safe for the Heater and Surrounding Environment
5. Use Mounting Brackets to Position Heater Away from Tank Wall and Above Sludge Buildup at Bottom of Tank
6. Periodically Remove the Heater to Clean Residues and Inspect for Damage

Model No.	Sheath	Watt Density		Watts	Volts	A		B
Model No.	Sheath	watt/in²	watt/cm²	Watts	Volts	mm	inch	mm	inch
TAT30003	Copper	8	1.2	1000	120	914	36	483	19
TAT30004	Copper	32	5.0	4000	240	914	36	483	19
TAT30002	Stainless Steel	8	1.2	1000	120	914	36	483	19
TAT30001	Stainless Steel	32	5.0	4000	240	914	36	483	19
TAT30005	Steel	8	1.2	1000	120	914	36	483	19
TAT30006	Steel	32	5.0	4000	240	914	36	483	19
Note: This style heater can be manufactured with “A” and “B” dimensions suitable for other applications. Consult Omega with your requirements. Ordering Example: TAT30003, 1000 watts, 120 Vac immersion heater.