Handheld Thermal Wire Strippers

TW and TWC

スクロールダウンし、全ラインアップをご覧ください

注文する

Thermal wire stripping to highest industrial standards
Long life, low-cost blade is easily replaced
Ruggedly built for production use
Self-contained, handheld
Strips wire from 10 to 38 AWG

熱電対素線 / 被覆熱電対 / 補償導線 - 関連する商品を探す
（見つからない場合はカスタマーサービスにご連絡ください）

商品説明

Designed especially for electronic assembly to aerospace standards, the wire stripper combines high production rates with consistently high wiring reliability. It is especially valuable when working with fine gage wire. Each unit has adjustable strip and wire-gage stops.

The rugged alloy blades have a long life under demanding production schedules. They heat to temperatures of 1700°F (926°C) in less than two seconds. They also cool instantly, eliminating the need for special racks or holding clips and providing complete operator safety.

Completely self-contained, the standard wire stripper uses no external transformer or power supplies. The compact, solid state Temperature Control Unit supplied with some models is used to reduce blade temperature for certain insulation materials that burn, scorch or emit fumes when touched by the 1700°F (926°C) blade temperature.

Because of the unique gage stop, adjustable from #10 to #38 AWG, the blades of the wire stripper do not exert any pressure on the conductor itself. In addition to positively eliminating nicks or deformation, this feature also protects the remaining insulation against damage, since the wire itself is not heated. The cut is clean and square, and no sleeving is melted into the wire strands. Insulation is easily cut at any predetermined point, and the unwanted slug is quickly removed. Wire ends are ready instantly for soldering or other means of connection.

All standard models, 115 Vac, 60 Hz, 60 Watts. 220 Vac, 60 Hz, 60 Watt is optional.

Model TW-1: “Standard” Model – For general production work. Completely self-contained. Has adjustable stops for both wire gage and strip length.

Model TWC-1: Controlled Temperature – Has solid state temperature control. Temperature adjustable from 100°F (38°C) to above 1700°F (926°C). Solid state control mounts as electrical outlet, eliminating bench clutter. Blades reach selected temperature in less than two seconds.

Model TW-2 LN: Long Nose – Strips up to 3½" in a single stripping action. Same operating features as the TW-1, except unit has four extra-long electrodes. Useful for stripping in inaccessible areas.

Model TW-6: Cable Stripper – Designed especially for slitting and removing the outer coverings of cables. Removes PFA coated as well as low temperature coaxial coverings. For coax cable or wire diameters 15.8 mm (0.625") or less.

Model TWC-6: Controlled Temperature – Same as the TW-6, but includes temperature control unit for adjustments from 100°F (38°C) to above 1700°F (926°C).

注文する（部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)

部品番号/Desc.

注文数

商品説明

TW-1

お問い合せ下さい

納期:

Standard model stripper

TWC-1

お問い合せ下さい

納期:

Controlled Temperature stripper

TW-2LN

お問い合せ下さい

納期:

Long Nose stripper

TW-6

お問い合せ下さい

納期:

Cable Stripper

TW-6 220

お問い合せ下さい

納期:

Controlled Temperature stripper 220 Vac

TWC-6

お問い合せ下さい

納期:

Controlled Temperature stripper

Accessories

TBM

お問い合せ下さい

納期:

Bench-Mounting Fixture

TC-1

お問い合せ下さい

納期:

Standard Temperature Control

RBN

お問い合せ下さい

納期:

Replacement Blades

RVUN

お問い合せ下さい

納期:

Unnotched replacement blades for use on fine gage wire 26-38 AWG