Top-to-Bottom Tube Mixers, Bung Mounted

FMXD11

Top-to-Bottom Bung-Entering Tube Mixers

^¥202,125 FMXD11

注文する

Mixing Tubes and Motors Supplied Separately in Modular Construction for Maximum Flexibility
TEFC Electric, or Air Driven Models Available
Mix With a Non-Vortexing, Non-Aerating Action

ポンプ - 関連する商品を探す
（見つからない場合はカスタマーサービスにご連絡ください）

商品説明

FMXD11 mixers efficiently mix from the top of a 55-gallon drum to the bottom, without requiring removal of the drum lid. The optional IPS drum bung adaptor allows fixed mounting of the mixer to the drum. Mixers draw approximately 14 gallons of liquid (750 cp max viscosity, 1.8 S.G. max density) per minute through the 2" diameter mixing tube. Fluid temperature range is 0 to 93°C (32 to 200°F).

A shaft-mounted turbine inside the mixing tube rotates at 3450 RPM (from 300 to 3000 RPM for the air motor), creating a steady suction effect at the four upper intake ports. Liquid is forced down through the tube and forcefully expelled through the ports at the bottom of the tube, breaking up and dissolving settled particles (maximum solid size is ¹⁄8"). FMXD11 mixers work with a non-vortexing, non-aerating action.

The mixing tubes are just under 1 m (38") long. They have PTFE bearings at the center and base of the tube, and a graphite-filled PTFE seal. The shaft, turbine, mixing tube, and sleeve are 316 stainless steel. Mixers are available with either an air-driven or electric motor.

The air-driven ¾ HP motor operates with 10 to 15 CFM air at 3.4 to 6.2 bar (50 to 90 psig), and includes a flow regulator and muffler.

The TEFC electric ¼ HP motors are thermaloverload protected, and come with an on/off switch and a 3.6 m (12') three-wire cord with plug (FPUD421 supplied without plug).

CAUTION: DO NOT USE THE AIR MOTOR WITHOUT THE FMXD3-SK ANTI-STATIC PROTECTION KIT

注文する（部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)

部品番号/Desc.

注文数

商品説明

MIXING TUBE

FMXD11

¥222,338 (税込)
(税抜価格 ¥202,125)

納期: 8 週間

Standard mixing tube

MIXER MOTORS

FPUD411

¥271,431 (税込)
(税抜価格 ¥246,755)

納期: 8 週間

1/4 HP, 3450 RPM Mixer Motor

FPUD421

¥302,907 (税込)
(税抜価格 ¥275,370)

納期: 8 週間

*1/4 HP, 2850 RPM Mixer Motor

FMXD11-AM

¥156,739 (税込)
(税抜価格 ¥142,490)

納期: 8 週間

3/4 HP, 3000 RPM Mixer Air Powered Motor

ACCESSORIES

FPUD5-PDA

¥33,462 (税込)
(税抜価格 ¥30,420)

納期: 8 週間

2" IPS polypro drum adaptor for FMXD11 mixers

FPUD5-GDA

¥22,017 (税込)
(税抜価格 ¥20,015)

納期: 8 週間

2" PS galvanized steel drum adaptor for FMXD11 mixers

FPUD5-SDA

¥86,592 (税込)
(税抜価格 ¥78,720)

納期: 8 週間

2" IPS 316SS drum adaptor for FMXD11 mixers

FMXD3-SK

¥141,323 (税込)
(税抜価格 ¥128,475)

納期: 8 週間

Static protection kit for FMXD11 std mixing tube

FPUD345-FL

お問い合せ下さい

納期:

Filter-lubricator assembly for FMXD11-AM motor, 3/4 FNPT connection

注: Comes complete with operator's manual.

Use the air motor and the FMXD3-SK static protection kit for mixing flammable materials or in explosive environments.

Use a filter/regulator and lubricator in the air supply line if the air is not filtered and lubricated.

* CE certified.

Ordering Example: (1) FMXD11 standard mixing tube, ¥202,125 plus (1) FMXD11-AM 3/4 HP, 3000 RPM Mixer Motor, ¥142,490 plus (1) FMXD3-SK Static protection kit, ¥128,475 , ¥202,125 + 142,490 + 128,475 = ¥473,090