【廃番】FMA5400A / 5500Aに移行しました。

FMA5400 and FMA5500

^¥447,275 FMA5544

注文する

NIST Traceable Calibration
Reads and Controls Gas Mass Flow Without Temperature or Pressure Compensation
Available in Economical Aluminum or Corrosion-Resistant 316 SS
Tiltable LCD Display for Easy Reading

質量流量計 (マスフローメータ) - 関連する商品を探す
（見つからない場合はカスタマーサービスにご連絡ください）

商品説明

The FMA5400 and FMA5500 series has been discontinued. Please see the upgraded FMA5400A and FMA5500A Series as a possible alternative or contact our Flow Engineering Department.

The FMA5400/5500 Series electronic gas mass flow controllers provide for controlling the flow of a wide variety of gases from 0-10 SCCM up to 100 SLM. Utilizing heat transfer through a heated tube to measure molecular gas flowrate, the FMA5400/5500 provides measurement of direct gas mass flowrate, without the need to compensate for variations in gas temperature or pressure (within stated limits). They are available in an economical aluminum/brass construction for typical gas flows and a 316 SS construction for applications requiring more corrosion resistance. The FMA5400 series without integral display is supplied with both an analog 0-5 Vdc and 4 to 20 mA output for remote monitoring; the FMA5500 series has both an integral 3-1/2 digit display and analog output. The display is tiltable over 90 degrees for viewing convenience. The display is calibrated standard to read out directly in SCCM or SLM for nitrogen (other gas calibrations available on special order).

The FMA5400/5500 mass flow controllers feature a built-in normally-closed electromagnetic valve for maintaining a constant flowrate regardless of variations in inlet or outlet pressures. The setpoint is controlled either locally via a potentiometer accessible through an access window in the case or remotely via an analog 0-5 Vdc or 4-20 mA signal (field selectable). The FMA5400/5500 series require 12 to 15 Vdc power @ 800 mA maximum, which can be supplied by the FMA545PW wall plug-in socket power supply (24 Vdc power input @ 650 mA is optionally available). The electronics are reverse polarity protected and have a resettable fuse. Model number FMA545C (supplied separately) provides a mating 15-pin “D” connector with 8 feet of shielded cable for accessing the analog output signals and power input connections. The LCD supplied with the FMA5500 series is connected to the lower electronics via a modular plug. The LCD can be remotely located by purchasing an FMA18RC remote cable assembly–you must then build your own assembly for panel mounting the LCD.

Range Table

Code	SCCM
43	0-200
44	0-500
45	0-1000

FMA5400/5500 Series Transducers should not be used for monitoring Oxygen gas unless specifically clean and prepared for such application. See ordering instructions below.

SPECIFICATIONS
Accuracy: ±1.5% FS, including linearity over 15 to 25°C (59 to 77°F) and
0.7 to 4.2 kg/cm² (10 to 60 psia) ±3% FS for units ≥ 100 SLM from o to 20% of range.
Repeatability: ±0.5% of full scale
Temp Coefficient: 0.15% FS/°C
Pressure Coefficient: 0.01% FS per psi (0.07 bar)
Maximum Pressure Drop: 50 psid
Response Time: 5 seconds to within ±2% of set flow rate over 25 to 100% FS
Max Gas Pressure: 35 kg/cm2 gage (500 psig); 1.76 kg/cm (25 psig) optimum
Gas and Ambient Temp: 5 to 50°C (41 to 122°F)
Leak Integrity: 1 x 10^-7 cc/sec of He max to outside environment
Materials in Fluid Contact:
   Aluminum Models: Anodized aluminum, 316 SS, brass and FKM O-rings
   Stainless Steel Models: 316 SS and FKM O-rings
Output Signal:
   Linear 0 to 5 Vdc: 1000 Ω minimum load
   4 to 20 mA: 50 to 500 Ω loop resistance, ±20 mV max noise
Transducer Power: 12 Vdc @ 800 mA standard; 24 Vdc @ 650 mA optional
Turndown Ratio: 50:1
Shipping Weight: 1.8 kg (4 lb)
Compliance: EN55011 class 1, class B; EN50082-1
Attitude Sensitivity: With horizontal flow path, no shift in calibration up to +20 degree pitch
Gas Relative Humidity: 0 to 70% RH
Min Pressure Drop

SLM	≤9	10-30	50	60-100	200	500	1000
psid	1.1	3.9	8	18.9	10	12	15

注文する（部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)

他のお客様はこのような商品も購入しています。: このアイコンをクリックすると、このモデルを購入した他のお客様の購入商品リストが表示されます.

部品番号/Desc.

注文数

商品説明

Mass Flow Controllers with Display, Al/Br Body (Use Part Number Builder for 316 SS Construction)

FMA5418

お問い合せ下さい

納期:

0 to 5 SLM

FMA5443

¥438,515 (税込)
(税抜価格 ¥398,650)

納期: 8 週間

*0 to 200 SLM

FMA5444

¥449,521 (税込)
(税抜価格 ¥408,655)

納期: 8 週間

*0 to 500 SLM

FMA5445

¥559,587 (税込)
(税抜価格 ¥508,715)

納期: 8 週間

*0 to 1000 SLM

Mass Flow Controllers Without Display, Al/Br Body (Use Part Number Builder for 316 SS construction)

FMA5544

¥492,003 (税込)
(税抜価格 ¥447,275)

納期: 8 週間

*0 to 500 SLM

FMA5545

¥586,003 (税込)
(税抜価格 ¥532,730)

納期: 8 週間

*0 to 1000 SLM, comes with 3/4 FNPT connections instead of compression fittings

FMA5543

¥469,332 (税込)
(税抜価格 ¥426,665)

納期: 8 週間

*0 to 200 SLM

Accessories

FMA18RC10

¥8,392 (税込)
(税抜価格 ¥7,629)

納期: 5 週間

10 ft cable for remote LCD mounting

FMA18RC25

¥12,909 (税込)
(税抜価格 ¥11,735)

納期: 6 週間

25 ft cable for remote LCD mounting

FMA545C

¥13,415 (税込)
(税抜価格 ¥12,195)

納期: 2 週間

Female 15-pin D-connector with 8 ft of shielded cable

FMA545C-10

¥14,438 (税込)
(税抜価格 ¥13,125)

納期: 6 週間

Female 15-pin D-connector with 10 ft of shielded cable

FMA545C-12

¥15,092 (税込)
(税抜価格 ¥13,720)

納期: 6 週間

Female 15-pin D-connector with 12 ft of shielded cable

FMA545C-18

¥16,830 (税込)
(税抜価格 ¥15,300)

納期: 6 週間

Female 15-pin D-connector with 18 ft of shielded cable

FMA545C-25

¥19,014 (税込)
(税抜価格 ¥17,285)

納期: 6 週間

Female 15-pin D-connector with 25 ft of shielded cable

FMA545PW

¥19,241 (税込)
(税抜価格 ¥17,492)

納期: 4 週間

Socket plug-in power supply for 115 Vac

FMA545PW-220VAC

¥21,329 (税込)
(税抜価格 ¥19,390)

納期: 2 週間

Socket plug-in power supply for 220 Vac, VDE plug type

注: Comes complete with NIST certificate, compression fittings, and operator''s manual. Power supplies sold separately.

Flow ranges specified are for nitrogen or air at 20 psig inlet (up to 50 SLM0 or 25 psig inlet (60 to 100 SLM units) and 0 psig outlet. when used with other gasses, a multiplication factor is used to determine the flow rate, and the digital display must be rescaled in the field.

To request a custom calibration add the gas abbreviation and inlet pressure/outlet pressure as a suffix to the model number.

Calibrations done at ambient (20C/70F) temperature only.

For 316SS add suffix "ST" to the part number, consult Omega Flow Engineering for cost.

*For units powered by 24 Vdc, add suffix “-24VDC” to model number, no additional cost.

For Oxygen cleaned units, add suffix "-O2CLEAN" to the model number; add $125 to the price.

Ordering Example: (1) FMA545PW Power Suppy for 110Vac, ¥17,492

部品番号ビルダー

下記から仕様構成を選択し、ご注文ください

	(1)	(2)	(3)
FMA

以下からオプションを選択:

(1) Display :
54 : without display
55 : with display

(2) Range Code(see table above) :
02 : code 02
04 : code 04
06 : code 06
08 : code 08
10 : code 10
12 : code 12
14 : code 14
16 : code 16
18 : code 18
20 : code 20
22 : code 22
24 : code 24
26 : code 26
28 : code 28
40 : code 40
41 : code 41
42 : code 42

(3) Body :
オプション選択がない場合 : aluminum/brass body
ST : 316 SS body

注: 有効な部品番号については、「商品仕様(PDF)」を参照ください。
ご不明な場合は、カスタマーサービス(0120-040-572 もしくは jpesales@dwyeromega.com)へお問合せください。

製品マニュアル:

ダウンロード FMA5400, FMA5500 - Mass Flow Controllers