Integrated Stepper Drives/Motors with Advanced Features and Control Options

STM Series

Integrated Stepper Drives/Motors

^¥93,715 STM17S-3AN

注文する

Pulse and Direction
Analog Input (Velocity/Position)
Serial Commands via RS232/485/Ethernet
Stand-Alone Programmable (Q and IP Models)
Multi-Axis System with SiNet^™ Hub 444 (STM23 only) or RS485 Interface (all models)
Microstepping Up To 51200 steps/revolution
Flex I/O With STM24

モータ - 関連する商品を探す
（見つからない場合はカスタマーサービスにご連絡ください）

商品説明

The STM is a drive + motor + control unit, fusing step motor, drive, and controller technologies into a single device, offering savings on space, wiring and cost over conventional motor and drive solutions. The "S" models offer control options such as step and direction, analog input, joystick control, and host commands using the Si Command Language (SCL). SCL allows for control via serial commands sent from a host device such as a PC or PLC. This permits the user to perform a variety of motion, I/O, and system status tasks in real time via a host serial device.

For Torque/Speed Curves, Click On "Manuals" Above

The"Q" and "IP" models add the capability of stand-alone programmable operation using the "Q" text-based programming language. This language offers high-level features such as multi-tasking, conditional programming, math functions, register access, and much more. All of the STM models offer RS232 and RS485 versions, as well as the option of a 1000-line encoder that is integrated into the motor housing. The encoder option provides stall detection and prevention; the controller senses rotor lag and reduces speed to avoid stalling. Models are available with 85 oz-in up to 340 oz-in torque. STM23 models also offer Ethernet and Ethernet/IP versions.

New! STM17 & STM24 models (see ordering table below)

ADVANCED FEATURES
Auto Set-Up:
At start-up the drive measures motor parameters, including the resistance and inductance, then uses this information to optimize the system performance.

Self-Test:
At power-up the drive diagnoses mis-wires and detects any open or shorted motor phases.

Torque Ripple Smoothing:
The drive smoothes the low-speed torque ripple which is inherent in all step motor systems.

Command Signal Smoothing:
Command Signal Smoothing can soften the effect of immediate changes in velocity and direction, making the motion of the motor less jerky.

Anti-Resonance/Electronic Damping:
Step motor systems resonate at certain speeds. The STM drive + motor automatically calculates the system’s natural frequency and applies damping to the control algorithm.

The ELC-PH12NNDT model PLC provides high-speed pulse outputs which can be used to drive any of Omega's step & direction stepper drives. The ELCSoft ladder logic software has built-in step motor functions which make programming your motion control application easy. The STM23S-2AN is an integrated stepper drive + stepper motor which accepts pulses from a PLC. Add the ELCSoft programming software, ELC-CBPCELC1 programming cable, and OMPS150A24 power supply for a complete motion-control system that costs less than $1000.

Protect your power supply from motor regeneration with the OMRC-050 regen clamp... see "Specs" above for details.

注文する（部品番号ビルダーより掲載以外の製品もご選択いただけます）(注文数を入力の上、"カートに追加"をクリックしてください)

他のお客様はこのような商品も購入しています。: このアイコンをクリックすると、このモデルを購入した他のお客様の購入商品リストが表示されます.

部品番号/Desc.

注文数

商品説明

'S' Models: Pulse & Direction, Analog In, Joystick, Serial Commands

STM17S-3AN

¥103,087 (税込)
(税抜価格 ¥93,715)

納期: 4 週間

Integrated stepper drive/motor, 85 oz-in max torque, RS232

STM17S-3RN

¥120,802 (税込)
(税抜価格 ¥109,820)

納期: 6 週間

Integrated stepper drive/motor, 85 oz-in max torque, RS485

STM17S-3AE

¥141,746 (税込)
(税抜価格 ¥128,860)

納期: 6 週間

Integrated stepper drive/motor, 85 oz-in max torque, RS232, encoder

STM17S-3RE

¥149,798 (税込)
(税抜価格 ¥136,180)

納期: 4 週間

Integrated stepper drive/motor, 85 oz-in max torque, RS485, encoder

STM23S-2AN

¥124,025 (税込)
(税抜価格 ¥112,750)

納期: 2 週間

Integrated stepper drive/motor, 125 oz-in max torque, RS232

STM23S-2RN

¥127,248 (税込)
(税抜価格 ¥115,680)

納期: 6 週間

Integrated stepper drive/motor, 125 oz-in max torque, RS485

STM23S-2AE

¥156,239 (税込)
(税抜価格 ¥142,035)

納期: 8 週間

Integrated stepper drive/motor, 125 oz-in max torque, RS232, encoder

STM23S-2RE

¥164,291 (税込)
(税抜価格 ¥149,355)

納期: 8 週間

Integrated stepper drive/motor, 125 oz-in max torque, RS485, encoder

STM23S-2EN

¥135,300 (税込)
(税抜価格 ¥123,000)

納期: 6 週間

Integrated stepper drive/motor, 125 oz-in max torque, Ethernet

STM23S-2EE

¥167,514 (税込)
(税抜価格 ¥152,285)

納期: 6 週間

Integrated stepper drive/motor, 125 oz-in max torque, Ethernet, encoder

STM23S-3AN

¥130,466 (税込)
(税抜価格 ¥118,605)

納期: 2 週間

Integrated stepper drive/motor, 210 oz-in max torque, RS232

STM23S-3RN

お問い合せ下さい

納期:

Integrated stepper drive/motor, 210 oz-in max torque, RS485

STM23S-3AE

¥161,073 (税込)
(税抜価格 ¥146,430)

納期: 8 週間

Integrated stepper drive/motor, 210 oz-in max torque, RS232, encoder

STM23S-3RE

¥170,731 (税込)
(税抜価格 ¥155,210)

納期: 8 週間

Integrated stepper drive/motor, 210 oz-in max torque, RS485, encoder

STM23S-3EN

¥148,181 (税込)
(税抜価格 ¥134,710)

納期: 6 週間

Integrated stepper drive/motor, 210 oz-in max torque, Ethernet

STM23S-3EE

¥177,177 (税込)
(税抜価格 ¥161,070)

納期: 6 週間

Integrated stepper drive/motor, 210 oz-in max torque, Ethernet, encoder

STM24SF-3AN

お問い合せ下さい

納期:

Integrated stepper drive/motor, 340 oz-in max torque, RS232

STM24SF-3RN

¥148,181 (税込)
(税抜価格 ¥134,710)

納期: 4 週間

Integrated stepper drive/motor, 340 oz-in max torque, RS485

STM24SF-3AE

¥180,131 (税込)
(税抜価格 ¥163,755)

納期: 2 週間

Integrated stepper drive/motor, 340 oz-in max torque, RS232, encoder

STM24SF-3RE

¥180,400 (税込)
(税抜価格 ¥164,000)

納期: 4 週間

Integrated stepper drive/motor, 340 oz-in max torque, RS485, encoder

'Q' Models: Stand-Alone Programmable

STM17Q-3AN

¥141,746 (税込)
(税抜価格 ¥128,860)

納期: 8 週間

Integrated stepper drive/motor, 85 oz-in max torque, RS232

STM17Q-3RN

¥149,798 (税込)
(税抜価格 ¥136,180)

納期: 8 週間

Integrated stepper drive/motor, 85 oz-in max torque, RS485

STM17Q-3AE

¥177,177 (税込)
(税抜価格 ¥161,070)

納期: 2 週間

Integrated stepper drive/motor, 85 oz-in max torque, RS232, encoder

STM17Q-3RE

¥185,229 (税込)
(税抜価格 ¥168,390)

納期: 4 週間

Integrated stepper drive/motor, 85 oz-in max torque, RS485, encoder

STM23Q-2AN

¥144,964 (税込)
(税抜価格 ¥131,785)

納期: 2 週間

Integrated stepper drive/motor, 125 oz-in max torque, RS232

STM23Q-2RN

¥165,902 (税込)
(税抜価格 ¥150,820)

納期: 8 週間

Integrated stepper drive/motor, 125 oz-in max torque, RS485

STM23Q-2AE

¥194,898 (税込)
(税抜価格 ¥177,180)

納期: 8 週間

Integrated stepper drive/motor, 125 oz-in max torque, RS232, encoder

STM23Q-2RE

¥206,173 (税込)
(税抜価格 ¥187,430)

納期: 8 週間

Integrated stepper drive/motor, 125 oz-in max torque, RS485, encoder

STM23Q-2EN

¥169,125 (税込)
(税抜価格 ¥153,750)

納期: 6 週間

Integrated stepper drive/motor, 125 oz-in max torque, Ethernet

STM23Q-2EE

¥206,173 (税込)
(税抜価格 ¥187,430)

納期: 2 週間

Integrated stepper drive/motor, 125 oz-in max torque, Ethernet, encoder

STM23Q-3AN

¥153,016 (税込)
(税抜価格 ¥139,105)

納期: 11 週間

Integrated stepper drive/motor, 210 oz-in max torque, RS232

STM23Q-3RN

¥172,348 (税込)
(税抜価格 ¥156,680)

納期: 8 週間

Integrated stepper drive/motor, 210 oz-in max torque, RS485

STM23Q-3AE

¥202,950 (税込)
(税抜価格 ¥184,500)

納期: 8 週間

Integrated stepper drive/motor, 210 oz-in max torque, RS232, encoder

STM23Q-3RE

¥207,779 (税込)
(税抜価格 ¥188,890)

納期: 8 週間

Integrated stepper drive/motor, 210 oz-in max torque, RS485, encoder

STM23Q-3EN

¥183,618 (税込)
(税抜価格 ¥166,925)

納期: 6 週間

Integrated stepper drive/motor, 210 oz-in max torque, Ethernet

STM23Q-3EE

¥220,666 (税込)
(税抜価格 ¥200,605)

納期: 6 週間

Integrated stepper drive/motor, 210 oz-in max torque, Ethernet, encoder

STM24QF-3AN

¥180,131 (税込)
(税抜価格 ¥163,755)

納期: 4 週間

Integrated stepper drive/motor, 340 oz-in max torque, RS232

STM24QF-3RN

¥183,618 (税込)
(税抜価格 ¥166,925)

納期: 17 週間

Integrated stepper drive/motor, 340 oz-in max torque, RS485

STM24QF-3AE

¥212,608 (税込)
(税抜価格 ¥193,280)

納期: 4 週間

Integrated stepper drive/motor, 340 oz-in max torque, RS232, encoder

STM24QF-3RE

¥232,051 (税込)
(税抜価格 ¥210,955)

納期: 18 週間

Integrated stepper drive/motor, 340 oz-in max torque, RS485, encoder

'IP' Models: Stand-Alone Programmable, Ethernet/IP

STM23IP-2EN

¥169,125 (税込)
(税抜価格 ¥153,750)

納期: 8 週間

Integrated stepper drive/motor, 125 oz-in max torque, Ethernet/IP

STM23IP-2EE

¥206,173 (税込)
(税抜価格 ¥187,430)

納期: 6 週間

Integrated stepper drive/motor, 125 oz-in max torque, Ethernet/IP, encoder

STM23IP-3EN

¥178,789 (税込)
(税抜価格 ¥162,535)

納期: 8 週間

Integrated stepper drive/motor, 210 oz-in max torque, Ethernet/IP

STM23IP-3EE

¥222,277 (税込)
(税抜価格 ¥202,070)

納期: 6 週間

Integrated stepper drive/motor, 210 oz-in max torque, Ethernet/IP, encoder

Accessories

OMPS150A24

お問い合せ下さい

納期:

Power supply for STM drive, 24 Vdc, 6.3 A

OMPS300A48

お問い合せ下さい

納期:

Power supply for STM drive, 48 Vdc, 6.7 A

OMRC-050

¥53,372 (税込)
(税抜価格 ¥48,520)

納期: 2 週間

Motor regeneration clamp

Power Cord-SE

¥2,574 (税込)
(税抜価格 ¥2,340)

納期: 5 週間

AC Power cord with stripped end termination

HUB 444 DIN RAIL

お問い合せ下さい

納期:

Multi-axis motion serial hub with DIN-rail mounting kit

OM-CONV-USB

¥5,172 (税込)
(税抜価格 ¥4,702)

納期: 2 週間

USB to RS-232 Interface Converter; USB-A to DB9-male

OMG-USB-485-1

¥38,632 (税込)
(税抜価格 ¥35,120)

納期: 2 週間

USB to RS-422/485/530 Interface Converter; USB-A to DB25-male

OMG-CA175

¥4,252 (税込)
(税抜価格 ¥3,865)

納期: 8 週間

DB25F/DB9M cable (DB9 RS-485 pinout)

DSUB-9-MF

お問い合せ下さい

納期:

DIN rail interface module, 9-pin

DSUB-25-MF

お問い合せ下さい

納期:

DIN rail interface module, 25-pin

DSUB-9-MF-CBL

¥10,252 (税込)
(税抜価格 ¥9,320)

納期: 2 週間

DSUB cable, 9-pin, 2 m (6.6'), male/female connectors

DSUB-25-MF-CBL

¥13,860 (税込)
(税抜価格 ¥12,600)

納期: 2 週間

DSUB cable, 25-pin, 2 m (6.6'), male/female connectors

注: Power supply is required (sold separately).
Comes complete with software and download cable.
Ordering Example: (1) STM23S-2AE Integrated stepper drive/motor with 125 oz-in holding torque and RS232 interface plus 1000-line encoder, ¥142,035

製品マニュアル:

ダウンロード STM17 Series - Integrated Step Motor and Drive Hardware Manual

ダウンロード STM23 Series - Integrated Step Motor and Drive Hardware Manual

ダウンロード STM24 Series - Integrated Step Motor and Drive Hardware Manual

ダウンロード STM Series - Si Command Language (SCL) manual